Greenworks 22272 - Manuals

5 GENERAL SAfETy RULES FOR ALL gARdEN TOOLS • Avoid dangerous environments. Don’t use tool in damp or wet locations.• Don’t use in rain.• Keep bystanders and children at least 50 feet away while operating.• Dress properly. Do not wear loose clothing or jewellery. They can be caught in moving parts. ...

8 W A R N I N g REAd ANd UNdERSTANd ALL INSTRUCTIONS. Failure to follow safety rules listed below may result in electric shock, fire, and/or personal injury: • Do not place the charger where the power cord might be stepped on, tripped on, or subjected to damage. • A battery-operated tool with integr...

9 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SyMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz frequency (cyc...

The following signal words and meanings are intended to explain the levels of risk associated with this product. SyMBOL SIgNAL MEANINg dANgER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNINg Indicates a potentially hazardous situatio...

11 KNOW yOUR HEDGE TRIMMER Fig. 1 KNOW yOUR POLE HEdgE TRIMMER (See Figure 1.) The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize your...

12 ASSEMBLy INSTRUCTION UNPACKINg This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not d...

14 OPERATION W A R N I N g Do not allow familiarity with this product to make you careless. Remember that a careless frac- tion of a second is sufficient to inflict serious injury. W A R N I N g Always wear eye protection with side shields marked to comply with ANSI Z87.1. Wear head protection when ...

16 OPERATION STARTINg ANd STOPPINg THE HEdgE TRIMMER (See Figure 4.) To start: • Remove the blade cover.• Push the front trigger.• Press and hold the lock-out button.• Depress the switch trigger.• Release the lock-out button. Continue to depress the switch trigger for extended operation. To stop: • ...

18 OPERATION Fig. 7 Fig. 6 AdJUSTINg POLE LENgTH (See Figure 6.) • Rest the handle on the ground.• Loosen the handle cam lock and adjust the handle shaft to a comfortable length.• fasten the handle cam lock. FASTEN ANd LOOSEN THE HANdEL CAM LOCK (See Figure 6.) • fasten and loosen the handle cam loc...

20 BATTERy CHARGER CHARgINg PROCEdURE (See Figure 8. ) N O T E : The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time. 1. Plug th...

21 BATTERy CHARGER W A R N I N g If the battery is inserted into the charger when warm or hot, the CHARGING LED indicator light on the charger may switch on and illuminate ORANGE. If this occurs allow the battery to cool outside of the charger from approximately 30 minutes. CHARgER MAINTENANCE • Kee...

MAINTENANCE 22 W A R N I N g When servicing, use only identical replacement parts. Use of any other parts may create a haz- ard or cause product damage. W A R N I N g To avoid serious personal injury, always remove the battery pack from the product before in- specting, cleaning or performing any mai...

MAINTENANCE 23 CLEANINg THE HEdgE TRIMMER • Remove the battery pack.• Slide the blade cover over the blade.• Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent. NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be da...

24 ENVIRONMENTALLy SAfE BATTERy DISPOSAL The following toxic and corrosive materials are in the batteries used in this hedge trimmer battery pack: Lithium-Ion, a toxic material. W A R N I N g W A R N I N g All toxic materials must be disposed of in a specified manner to prevent contamination of the ...

25 TROUBLESHOOTING Motor fails to start when switch trigger is depressed. Motor runs,but cutting blades do not move. Hedger damaged. Do not use hedge trimmer. Call for technical service. Hedge trimmer smokes during operation. Motor hums, blades do not move. Hedger damaged. Do not use hedge trimmer. ...

26 GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, ...

28 PARTS LIST ITEM NO. PART NO. dESCRIPTION QTy 1 34101707 left handle 1 2 34103707 cord clip 1 3 33401178B spring 2 4 34113505-1 anti-lock off button 1 5 33402161-1 spring 1 6 34121708 switch button 1 7 34104978 motor housing insert board 1 8 34102707 right handle 1 9 32201517 nut 23 10 36301454-2 ...