Graco Maxi-Flo Pump Package- Manuals

Graco Maxi-Flo Pump Package– User Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - MOTOR COMPARTMENT; RELIEF

Trabon ® Maxi-Flo ® Pump Package 13110 Page 2 OPERATION The pump gearmotor, energized by one of the three control units, rotates an eccentric (A) connected to a rod that drives the pump piston (B). On the prime stroke, the piston opens the inlet port (C), allowing oil from the reservoir to flow into...

Page 3 - REMOTE CONTROL WIRING

Trabon ® Maxi-Flo ® Pump Package 13110 Page 3 DETAIL ON STANDARD AND OPTIONAL SWITCHES OPERATION WITH TIME CONTROL Set the slide switch to either minutes or hours for cycle time. Next, set the desired pump " ON TIME " using a screwdriver in the slotted head of the scale marked " ON TIME ...

Page 4 - GENERAL INSTRUCTIONS; Maxi-Flo pump should be cleaned with a mild detergent.; Note; : The Maxi-Flo package was not designed for use in outdoor; Graco endorses the SAE recommendation of ISO 18/14 (ISO 4406) oil; TRABON; COMPONENT ORDERING; Description; call

ä ä DIMENSIONS Inches (mm) GENERAL INSTRUCTIONS Maximum pump pressure is 500 psi. Damage may result if pump is operated in excess of 600 psi. Relief valve automatically relieves output to atmosphere at 600 psi. Fill reservoir with clean, filtered oil - never allow pump to operate on an empty reservo...

Graco Manuals