Graco 3A1333A- Manuals

Warnings 2 3A1333A Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...

Warnings 3A1333A 3 Install the USB Module 1. Disconnect main power. Open the control box. 2. Remove the five knockouts (K) on the top of the con-trol box. See F IG . 1. 3. Install the USB module using four screws (341). The fifth screw (343) and star washer (342) must be installed in the center knoc...

Warnings 4 3A1333A Install the Power CAN Cable Non-IS Systems 1. Remove the user interface cable from J8 of the fluid control module and plug it into connector P3 of the USB module. See F IG . 2. 2. Connect Part No. 15V778 Cable (order separately) to J8 of the fluid control module and to connector P...