Graco 310696F- Manuals

Page 2 - Contents; WARNING

Warnings 2 310696F Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation Requirements . . . . . . . . ....

Page 4 - Installation; Overview; Installation Requirements; Fluid Supply; Mounting

Installation 4 310696F Installation Overview The Endress+Hauser Promass ® 80A flow meter pro- vides a configurable and highly accurate means of mea-suring fluid flow. It uses the Coriolis principle to measure mass flow and fluid density and also measures fluid temperature, using an integrated temper...

Page 5 - Vertical Mounting; Horizontal Mounting; Fluid Line Connection

Installation 310696F 5 Vertical Mounting Fluid Flow Upward - preferred method Mounting so fluid flow is upward through the meter is preferred as this allows solids to settle out and air to rise away from metering tube. F IG . 1. Install the check valve provided at the meter inlet to min-imize pulsat...

Page 6 - Power Supply Installation; Cable Connections; Power Harnesses and Cables; Meter Signal Cable

Installation 6 310696F Power Supply Installation 1. Turn proportioner power off and disconnect power source. 2. Open the EasyKey™ enclosure with its key. 3. Knock out the 2 prepared holes in the top of the EasyKey™ enclosure. 4. Apply the A and B labels as shown in F IG . 3. 5. Install DIN rail (16)...

Page 8 - Grounding; Flow Meter Sensor; Meter Fluid Manifold

Installation 8 310696F Power and Signal Cable Connections to Meter The power cable (3) and signal cable (4) are factory assembled to the meter. If cables need servicing or replacement, see F IG . 6 to connect to meter. Grounding Flow Meter Sensor Ground the flow meter sensor by connecting a ground w...

Page 9 - Operation; Start Up; Basic Installation Settings

Operation 310696F 9 Operation Start Up When all electrical and fluid connections are complete, reconnect the power source to the EasyKey™ Display, and turn it on. Pressure Relief Procedure 1. Turn off the fluid supply to the meter. 2. Follow the Pressure Relief Procedure in the oper-ation manuals. U...

Page 10 - Measuring values; Function Matrix

Operation 10 310696F Measuring values The following are the recommended settings for using the meter with the propor tioner. If a value is not mentioned, use the default Endress+Hauser setting. * When changing a value, use or keys to toggle through available selections. Use Enter key to select and s...

Page 12 - Parts

Parts 12 310696F Parts Part No. 234563 1 4 2 7 10 15 12 13 16 2 6 3 T14931A T14933A 11 8 5 5 Note: Coriolis Meter Kit parts are showninstalled on the Easy Key DisplayOnly numbered items are par t of the meter kit. Ref. No. Part No. Description Qty. 1 15D135 Coriolis Flow Meter 1 2 166846 Adapter, 1/...

Page 13 - Dimensions

Dimensions 310696F 13 Dimensions Dimensions - inches (mm) Technical Data * When used with ProMix™ II , ProMix ™ Auto, or ProControl systems. See Endress+Hauser meter manual for additional infor- mation. ** Promass ® is a registered trademark of Endress+Hauser. N M L K G J 0.26 in.(6.6 mm) (4X) R S E...

Page 14 - Graco Standard Warranty

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents. Original instructions. This manual contains Eng...