GMC VEC117 - Manuals

9 Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal...

11 5. Carefully remove the reflector and bulb assembly (fig. G). 6. Disconnect the bulb wire from the red power wire (fig. H). 7. Unsnap the hairpin retaining wires from the reflector’s flange (fig. I). 8. Using the screwdriver, loosen the retaining screw to remove the bulb from the reflector (no ne...

12 3. Separate the hard plastic cap from the body (fig. Q).4. Note the battery can slide out of the body so keep the body level (fig. R). 5. Slowly lift the lens end of the light so the battery slides out of the body (fig. S). 6. The battery terminals are attached to two wires. These wires must be d...

13 Maintenance Store the spotlight, instruction manual and where necessary the accessories in the original packaging. In this way you will always have all the information and parts ready to hand. Do not throw used batteries into fire or water. There is a danger of explosion! Please hand in non-worki...

Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type G...