GMC SYT210 - Manuals

8 Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements.1. Laser light assembly2. Laser light on/off switch3. Laser cover4. Laser aperture5. Saw arm 6. Release knob7. Operating handle8. Upper fixed blade guard9. Rotating blade guard10. G...

11 4. Rotate the table (16) until the pointer is positioned at 0º. 5. Tighten the mitre locks (18).6. Loosen the bevel lock (12) and set the saw arm (5) at 0º bevel (the blade at 90º to the mitre table). Tighten the bevel lock (12) (fig. O). 7. Place a set square against the table (16) and the flat ...

12 10. Loosen the Phillips head screw holding the pointer of the mitre scale (17) and adjust it so that it accurately indicates the zero position on the mitre scale (fig. W). 11. Retighten the screw securing the mitre scale pointer. Changing a blade DANGER! Never try to use a blade larger than the s...

15 2. Loosen the mitre locks (18). 3. Rotate the mitre table (16) until the pointer aligns with the desired angle on the mitre scale (17). 4. Retighten the mitre locks (18). WARNING. Be sure to tighten the mitre locks before making a cut. Failure to do so could result in the table moving during the ...

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...