GMC POL1450M - Manuals - manualsarea.com

Page 2 - Contents; Warranty Power Tools

2 Warranty 2 Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for angle grinders 5 Additional safety rules for sanders 6 Additional safety rules for polishers 7 Accessories 7 Unpacking 7 Know your product 8 Setting up 9...

Page 4 - General safety rules

General safety rules WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) po...

Page 5 - Additional safety rules for

4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that canno...

Page 7 - Accessories

e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control. Safety warnings specific for grinding and abrasive cutting-off operations a) Use only wheel types that are recommended for your power tool and the specific guard designed fo...

Page 8 - Know your product

Know your product Before using the polisher, familiarise yourself with all the operating features and safety requirements.Use the tool and accessories only for the applications intended. All other applications are expressly ruled out.1. Motor housing2. Spindle lock button3. Variable speed dial4. Rea...

Page 9 - Setting up; Operation in grinder mode

Setting up Multi position front handle Screw the multi position front handle (9) into the most suitable mounting point (6) (left side, right side or at the top) to suit the task on hand. Variable Speed The POL1450M is fitted with a variable speed dial (3) that allows you to adjust the speed to suit ...

Page 11 - Operation in polisher mode

11 2. Align the sandpaper with the rubber disc and press down firmly to ensure a good grip. 3. Special care must be taken with Hook & Loop platens, as a build up of dust, or wearing the sandpaper down completely before changing it, can result in damage to the hooks & loops on the platen and ...

Page 13 - Maintenance

Replacing the rubber disc Switch off the grinder/sander/polisher and disconnect it from the power supply.1. The polishing sponge and rubber disc are fitted with a quick disc release system meaning that no tools are required. To remove the disc, press and hold the spindle lock button (2) and unscrew ...

Page 16 - GMC customer assist; Should you not have

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...