GMC PEDG - Manuals - manualsarea.com

Page 2 - Contents; Full 2 Years Home Use Warranty

2 Contents Warranty 2 Introduction 3 Description of symbols 3 Specifications 4 Safety instructions 4 Additional safety rules for edgers 5 Contents of carton 6 Unpacking 6 Know your product 7 Assembly 8 Fueling 8 Starting the edger 9 Stoping the edger 9 Running in the engine 9 Cutting depth 9 Edge gu...

Page 3 - Description of symbols; Dear Customer

3 Description of symbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Wear breathing protection. Conforms to relevant standards for electromagnetic compatibility. Warn...

Page 5 - Additional safety rules for edgers

5 • Ensure the tool is switched off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. • Store idle power tools out of the reach of children and do not allow persons unfamili...

Page 7 - Know your product

7 Know your product 1. Lock off button2. Throttle trigger3. Ignition switch 4. Auxiliary handle5. Shaft6. Edger guide lever7. Wheel8. Auxiliary handle lock knob9. Height adjustment knob10. Guide wheel11. Blade cut indicator12. Fuel tank13. Recoil starter14. Primer bulb15. Spark plug16. Air filter co...

Page 8 - Assembly; Fueling

8 Assembly Inserting the shaft Remove the nut from the hole in the base of the edger and insert the shaft. Replace the nut and retighten it. Telescope handle adjustment The shaft handle can be set at three different heights. To set the height for your comfort, slide the tube up to the level required...

Page 9 - Starting the edger; Stopping the edger

9 Starting the edger Choke control Start position (choke closed). Run position (choke open). To start the engine, proceed as follows: 1. Move the ignition switch (3) to the on position marked with an I . 2. Press the primer bulb (14) 6 times until there are no air bubbles visible in the fuel dischar...

Page 12 - Storage and maintenance after use

12 • Remove air filter cover (16) by turning the air filter locking knob (19) anti-clockwise and removing the cover as you do carefully remove the Air intake tube so that you can access the filter. • Light surface dust can readily be removed by tapping the filter. • Heavy deposits should be washed o...

Page 16 - GMC Product Type; The GMC 777 Helpline operates from 7am to; Save this Manual for future reference.

16 Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia)or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Ty...