GMC LSM210A - Manuals

9 Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements.1. Laser light assembly 2. Laser light on/off switch 3. Laser cover 4. Laser pitch control 5. Saw arm 6. Release knob 7. Operating handle 8. Carrying handle 9. Upper fixed blade gua...

13 T 6. Loosen the bevel lock (16) and set the saw arm (5) at 0º bevel (the blade at 90º to the mitre table). Tighten the bevel lock (16) (Fig. S). 7. Place a set square against the table (21) and the flat part of the blade. Note. Make sure that the square contacts the flat part of the saw blade, no...

14 Changing a blade DANGER! Never try to use a blade larger than the stated capacity of the saw. It might come into contact with the blade guards. Never use a blade that is too thick to allow the outer blade washer to engage with the flats on the spindle. It will prevent the blade screw from properl...

16 12. Release the switch trigger (24) and allow the saw blade to stop rotating before raising the blade out of the workpiece. Wait until the blade stops before removing the workpiece (Fig. k). Cross-cutting (with slide action) When cutting wide workpieces, first unscrew the slide lock (29).1. Pull ...

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...