GMC LD108V - Manuals - manualsarea.com

Page 2 - Contents; Warranty Power Tools

2 Contents Warranty Power Tools Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.This product ...

Page 4 - Safety instructions

4 Safety instructions WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) ...

Page 5 - Additional safety instructions for drills

5 c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamil...

Page 6 - Additional safety instructions for the charger

6 • Never use your hands to remove sawdust, chips or waste close by the bit. • Rags, cloths, cord, string and the like should never be left around the work area. • Support the work properly. • If you are interrupted when operating the drill, complete the process and switch off before looking up. • P...

Page 8 - When to charge the battery

8 according to the instructions in the GMC Instruction Manual. • Do not charge the battery in a place where static electricity is generated nor let the battery touch something that is statically charged. • The battery can be stored at temperatures between – 20° C and 40° C. NEVER STORE OR LEAVE YOUR...

Page 9 - Know your product

9 Know your product This drill is mainly used for drilling in wood or metal sheet and screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out.1. Keyless chuck2. Handle3. Variable speed trigger switch with electric brake 4. Forward/Rev...

Page 10 - Fitting and removing

10 Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious persona...

Page 13 - Using the drill

13 Using the drill Trigger switch Use the forward/reverse switch (4) to select the direction of rotation, then pull the trigger (3). This trigger switch is an electronic variable speed control which enables the user to vary the speed continuously. The speed varies according to how far the trigger sw...

Page 15 - Drilling; Chuck replacement

15 Drilling Drilling metals • Always clamp sheet metal. • Support thin metal with a block of wood to avoid distorting it. • Use a punch to mark the centre of the hole. • Use a suitable lubricant for the material you are working on, USE: FOR: Oil Steel Turpentine or paraffin Aluminium Do not lubricat...

Page 16 - GMC customer assist; Should you not have

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...