GMC FQC54V - Manuals

8 When to charge the tool • New tools are shipped in a low charge condition and must be fully charged before use. It takes approximately 90 seconds to fully charge the tool. • Charging the tool should not be undertaken casually. Through the charging cycle monitor the tool and make sure that screwdri...

9 1 Know your product This screw driver is for light to medium applications of screws and small nuts and bolts. If the screw driver is unable to rotate the fastener do not over load by holding the switch in the on position and manually rotating the fastener.1. Chuck/Bit retainer2. Rocker forward/rev...

11 To obtain the best life for the tool The screwdriver should be placed on charge whenever the chuck/bit retainer (1) no longer turns. DO NOT continue to use the screwdriver when the charge is exhausted. The screwdriver does not have automatic spindle lock and using the screwdriver with no charge m...

GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservi...