GMC DB305SMS - Manuals - manualsarea.com

Page 2 - Contents

Contents Full 2 Years Commercial and Trade Use Warranty Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service ...

Page 3 - Straight cut

3 Description of symbols The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Wear breathing protection. Double insulated for additional protection. Conforms to relevant safet...

Page 6 - Additional safety rules for mitre saws

6 13. Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use. 14. Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching...

Page 8 - Accessories

8 Accessories The GMC DB250SMS / DB305SMS Double Bevel Slide Compound Mitre Saw is supplied with the following accessories as standard: • Saw blade (fitted) • Workpiece clamp • 6mm Hex key • Side bars x2 • Stabiliser Bar • Dust bag • Instruction manual • Receipt holder

Page 9 - Know your product

9 Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements.1. Laser light assembly 2. Laser light on/off switch 3. Laser cover 4. Laser pitch control 5. Saw arm 6. Release knob 7. Operating handle 8. Carrying handle 9. Upper fixed blade gua...

Page 15 - Changing a blade

15 11. Loosen the Phillips head screw holding the pointer of the mitre scale (22) and adjust it so that it accurately indicates the zero position on the mitre scale (fig. f). 12. Retighten the screw securing the mitre scale pointer. 13. Replace the top section of the fence and secure the hex screw u...

Page 18 - Bevel cut

18 Cross-cutting (with slide action) When cutting wide workpieces, first unscrew the slide lock (29).1. Pull on the release knob (6), raise the saw arm (5) to its highest position and slide it towards you (fig. t). 2. Hold the handle firmly and squeeze the switch trigger (24). Allow the blade to rea...

Page 20 - Using the laser line generator; WARNINGS

20 Using the laser line generator WARNINGS Do not stare directly at the laser beam.Never aim the beam at any person or an object other than the workpiece.Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s.Always ensure t...

Page 24 - GMC Product Type; The GMC 777 Helpline operates from 7am to; Save this Manual for future reference.

Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia)or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type ...