GMC BG125A - Manuals

7 Know your product Before using the bench grinder, familiarise yourself withall the operating features and safety requirements.The GMC Bench Grinders are designed for light tomoderate duty applications in a home environment. Theyare not intended for use by trade persons. They are idealfor sharpenin...

8 Caution. During use it is important not to overload the grinder. The grinder should run at close to full speed. Ifyou are applying too much pressure the grinder will startto slow down. Under these conditions, remove the partbeing ground and allow the grinder to return to full speed. Re-apply the p...

1. Drain all the water from the bath (10).2. Remove the two securing screws at the top of the bath. 3. Loosen, but do not remove the lower retaining screw. 4. Push the top clips of the bath clear of housing andthen lower the bath clear ofthe housing. 5. Using an 18mm spanner, remove the wheel retain...

Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia)or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type ...