Gemini XPM-3000 - Manuals

(5) Connections, Controls and Indicators Rear Panel Note: 120V and 230V units have different types of output connectors on the rear panel. Input Section: There are two parallel input connectors (one female XLR and one 1/4” jack) per channel. Either can be used as an input or as a link tochain amplif...

(6) one connector touch the adjacent connector, the sound will bedistorted, and your amplifier will overheat and go into protectionmode. NOTE (120V only): Two subwoofer output connectors are provided to connect two subwoofers with separate cables. These outputs are wired in parallel and are connecte...

(7) 2. Connect the loudspeakers to the channel A and channel B SPEAKER OUTPUTS (8, 9) . THE TOTAL SPEAKER LOAD MUST BE AT LEAST 4 OHMS PER CHANNEL FOR CHANNELS A AND B. If youtry to operate at a lower impedance, the amplifier will overheat andthen go into protection mode and stop operation until you...