GBC 930-032 - Manuals

Operations Manual: Safety Voyager 3 Voyager 3 2004 General Binding Corporation Page 1-1 1.0 Safety CAUTION: Do not attempt to operate yourVoyager 3 Laminator until you completelyread and understand this and all relatedOperations Manual. Your safety, as well as the safety of others, is impor-tant to ...

Operations Manual: Safety Voyager 3 Voyager 3 2004 General Binding Corporation Page 1-2 1.2 General rules of safety ELECTRICAL HAZARD: Do not operatethe laminator if power cord is damaged orfrayed. You can be severely shocked, elec-trocuted or cause a fire. ELECTRICAL HAZARD: Employ a licensed elect...

WARNING: Sharp edge. Keeps hands andfingers away. Sharp edge can cut. WARNING: Keep hands and fingers away.The gate can crush. Operations Manual: Safety Voyager 3 Voyager 3 2004 General Binding Corporation Page 1-8 CAUTION: Max load and height. Do not exceed. Main Power Switch WARNING SHARP EDGE

Operations Manual: Safety Voyager 3 Voyager 3 2004 General Binding Corporation Page 1-10 1.8 Know your laminator To help you relate to the components referred to inthis manual, take the time to get to know what andwhere key components are on your new laminator. Over view Feeder

Operations Manual: Safety Voyager 3 Voyager 3 2004 General Binding Corporation Page 1-11 Laminator Separator

Operations Manual: Warranty Voyager 3 Voyager 3 2004 General Binding Corporation Page 2-1 2.0 Limited 90-Day Warranty GBC warrants to the original purchaser for a periodof one year parts and ninety days labor, after instal-lation that this laminator is free from defects in work-manship and material ...

Operations Manual: Specifications Voyager 3 Voyager 3 2004 General Binding Corporation Page 3-1 3.0 Specifications 3.1 MACHINE SPECIFICATION Maximum Speed: 150 ft/min = 10,000, 8.5 x 11 in. sheets/ hr.(45.7 meters/min = 10,000, 21.6 x 28 cm sheets/ hr.) Minimum sheet sizes: 8.5 x 11 in. with the 8.5...

Operations Manual: Specifications Voyager 3 Voyager 3 2004 General Binding Corporation Page 3-2 Ambient Air Temp: 5°-40° C Humidity Rating: 30%-95% (Non-Condensing) Altitude Rating: 1000 Meter Minimum 3.2 Feeder Specifications Minimum sheet sizes: 8.5” x 11” (21.6 x 28 cm) (8.5” side forward) Maximu...

Operations Manual: Specifications Voyager 3 Voyager 3 2004 General Binding Corporation Page 3-3 Other: Vacuum and blower adjustments Conveyor: Type: Vacuum style conveyor Length: Min. 40” (101.6 cm) Vacuum sections : Max. 4” (101.6 mm)from downstream edge of feeder conveyor with possibility to close...

Operations Manual: Specifications Voyager 3 Voyager 3 2004 General Binding Corporation Page 3-4 Motor power: 1.85 kW (informative) RPM at 50 Hz: 1420 (informative) Adjustments: Vacuum and pressure adjustments Power Requirement: Power supplied by the laminator Note: Air pump design equal or similar t...

4.0 Installation CAUTION: The GBC Voyager 3 can only beinstalled by a trained GBC Ser viceRepresentative. Before a Voayger 3 Laminator can be installed, thereare a few requirements that must be met. Make cer-tain that each of the requirements listed in the fol-lowing pre-installation checklist are m...

Operations Manual: Installation Voyager 3 Voyager 3 2004 General Binding Corporation Page 4-5 4.2 Receiving the crates The GBC Voyager 3 is shipped in two crates. Bothcrates should arrive at the same time on yourdocks. INFORMATION: ALL SHIPMENTS ARE EX-WORKS. At our dock, title passes to thebuyer. P...

Operations Manual: Installation Voyager 3 Voyager 3 2004 General Binding Corporation Page 4-6 4.4 Positioning the components All components are positioned by the center line ofthe laminator. The components should be posi-tioned in the following order; Laminator, stackertable, feeder, conveyor, vacuu...

Operations Manual: Installation Voyager 3 Voyager 3 2004 General Binding Corporation Page 4-7 Feeder Once the feeder has been safely removed from thecrate, you can move the feeder into position byusing a pallet jack or forklift. To move the feeder, approach the feeder from thefront and guide the for...