Fusion L702B - Manuals - manualsarea.com

Page 2 - C O N T E N T S

1 C O N T E N T S Specifications ................................................................................................................. 2 General Operation ......................................................................................................... 3 Output Battery Connection...

Page 3 - S P E C I F I C A T I O N S; MODE

2 S P E C I F I C A T I O N S MODE TYPE SPEC Power Supply DC Input 11-28V DC Battery Types NiCd, NiMH, LiPo, LiIon, LiFe, Pb Operating Modes NiCd, NiMH Charge, Discharge, Cycle LiPo, LiIon, LiFe, Pb Charge, Discharge, Store Operation function Charge (NiCd, NiMH) Automatic charge Normal charge Linear...

Page 4 - G E N E R A L O P E R A T I O N; O U T P U T B A T T E R Y C O N N E C T I O N S

3 G E N E R A L O P E R A T I O N O U T P U T B A T T E R Y C O N N E C T I O N S The Emperor L702B Pro has two sets of outputs on the front of the charger, channel 1 is on the left and channel 2 on the right. Each channel has two 4mm banana sockets, a 7 cell balance port and a temperature sensor in...

Page 5 - STORE MODE START; Ch1 Selected

4 T U R N I N G O N & S E T T I N G T H E I N P U T P O W E R The input power leads on the Emperor are supplied with 4mm gold banana type connectors (with optional crocodile clips) that should be connected directly to a suitable 11-28V DC power source, ensuring that the black connector is connec...

Page 6 - M E N U S T R U C T U R E

5 M E N U S T R U C T U R E The menu system in the Emperor L702B is summarized in the flow chart below. To move around the screens press the buttons as shown on the flow chart. Where a line selection arrow is shown on the left of a line, the ‘Inc’ and ‘Dec’ buttons can be used to move the selection ...

Page 7 - B A T T E R Y M E M O R Y S C R E E N

6 B A T T E R Y M E M O R Y S C R E E N The battery memory screen is the main functional screen for this charger. It is used to store specific battery, charge, discharge and safety parameters, as well as being used to initiate charging, discharging, cycling/store mode functions.  11]LiPo 3S 2200mAh...

Page 8 - L I T H I U M F U N C T I O N S A N D P A R A M E T E R S; pages (shown below) are accessed by moving the line; STORE MODE START

7 L I T H I U M F U N C T I O N S A N D P A R A M E T E R S When a Lithium type battery is selected, the following functions and parameters are available. The 2 nd and 3 rd pages (shown below) are accessed by moving the line selection down arrow off the bottom of the page. Page 3 Page 1 Page 2  11]...

Page 10 - N I C D / N I M H F U N C T I O N S A N D P A R A M E T E R S; PEAK DELAY : 3min

9 N I C D / N I M H F U N C T I O N S A N D P A R A M E T E R S Page 3 Page 1 Page 2  05]NiMH 6S 3000mAh CHG. : 3.0A 8mV/C DCHG. : 3.0A 0.8V/C CYCLE : C  D 1x 10m  CUT.TEMPER. : 55°C MAX.CAPACITY: 150% PEAK DELAY : 3min TRI CURRENT : 100mA  SAFETY TIMER: 120min Cut-off Temperature Cut-off when x...

Page 12 - C H A R G I N G; C H A R G I N G A L I T H I U M P A C K

11 C H A R G I N G With the selection arrow on the CHG line, select the correct charge rate and maximum cell/peak voltage for the battery being charged, then press and hold the C H A R G I N G A L I T H I U M P A C K In the flow chart below, we have shown an example of how to charge a 2S (7.4V) 2200...

Page 13 - C H A R G I N G A N I C D / N I M H P A C K; ‘Normal’; Automatic; The selected current is maintained throughout the charge.

12 C H A R G I N G A N I C D / N I M H P A C K In the flow chart below, we have shown an example of how to charge a 6 cell (7.2V) 3000mAh NiMH pack at 4.5 amps using a ‘Normal’ charge type. 1]NiMH 6S 3000mAh  CHG. : 4.5A 5mV/C DCHG. :10.0A 0.8V/C CYCLE : C  D 1x 10m  0]NiMH 6S 3300mAh CHG. : 3.3A...

Page 14 - O T H E R S C R E E N S; U S E R S E T T I N G S S C R E E N

13 In this example a ‘Normal’ charge is selected and then the ‘Enter’ button is pressed for 2 seconds to start the charge. As shown in the flow chart, pressing the ‘Mode’ or ‘Esc’ buttons at any stage moves through the different screens giving detailed information about the charge. Pressing the ‘Esc...

Page 15 - B A L A N C E R V I E W; S Y S T E M M E N U; F A C T O R Y S E T T I N G S

14 If the cycle function has been used (NiCd/NiMH only), then pressing the ‘Inc’ button shows the charge and discharge statistics for the previous 10 cycles. B A L A N C E R V I E W When a Lithium pack is connected to the charger, the balancer screen shows the balance statistics for the pack and all...

Page 17 - L I T H I U M I O N / P O L Y M E R B A T T E R Y - S A F E T Y W A R N I N G S; can be very dangerous.

16 • Lead-Acid batteries must be placed in a well ventilated area when charging. • DO NOT attempt to charge whilst the input 12 volt battery is being charged, as the voltage supplied to the charger may be too high. L I T H I U M I O N / P O L Y M E R B A T T E R Y - S A F E T Y W A R N I N G S Ensur...

Page 20 - ogic; rc; Logic RC Limited

1 www. l ogic rc .com Logic RC Limited 14 Hartham Lane Hertford SG14 1QN United Kingdom rev. 11-2009