Furuno IF-NMEA2K2 - Manuals

Furuno IF-NMEA2K2 – Manual in PDF format online.

Manuals:

Manual Furuno IF-NMEA2K2

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13

Summary

Page 2 - System Configuration; Specifications of NMEA Data Converter; Name Type

2 System Configuration The NMEA Data Converter IF-NMEA2K2 converts Furuno CAN bus format data to NMEA0183 format data and vice versa. NMEA0183 device* Furuno CAN bus device Furuno CAN bus cable NMEA DATA CONVERTER NMEA0183 cable PC, etc.* (RS-232C) Mode Conversion *: NMEA0183 cable can not be connec...

Page 3 - Installation; Mounting Considerations; up inside the cabinet.; Mounting; Wiring; Connection to Furuno CAN bus device; Connect the Furuno CAN bus cable to the Furuno CAN bus device. See; Connection to NMEA0183 device; interconnection diagram as below.

3 Installation Mounting Considerations • Locate the data converter well away from areas subject to water splash and rain. • Keep the data converter out of direct sunlight because of heat that can build up inside the cabinet. Mounting Fix the data converter to the mounting location with two self tapp...

Page 4 - Conversion Mode; Check the applicable checkbox on the nameplate according to the; Action; No action

4 After the connection, cut the unused cable cores and wind vinyl tape around the each edge of the wires and fix them so that they do not touch other signal cores or ground. Vinyl tape Conversion Mode PORT1 (ORG), PORT2 (PPL), GND (BLK) signal cores of the NMEA0183 cables are short-circuited (defaul...

Furuno Manuals