Foster 7120 043 - Manuals

Control panel 1. Thermostat 2. Selector3. Electronic timer4. End of cooking 4 5 6 2 1 1 5/6 3 6/5 2 5. Green light6. Yellow light7. Minute minder 8. Analog programmer and Analog timer 7 5 6 2 1 1 6 8 5 2 1 0

LIGHT ONLY BOTTOM ELEMENT ONLY Select the desired temperature between 50 ° C and 250 ° C. Suitable for very slow cooking and warming up of food. TOP HEATING ELEMENT Select the thermostat temperature from 50 ° C to 250 ° C. For keeping cooked food warm or gently reheating. GRILL + TURNSPIT By turning...

Suggested Personal 175 2 55 - 65 175 3 60 - 70 175 3 60 - 70 200 3 8 - 10 200 3 25 - 35 200 3 25 - 35 180 3 30 - 45 200 3 25 - 35 200 3 10 - 15 200 2 35 - 45 200 3 15 - 20 225 2 40 - 50 200 2 120 - 150 200 2 60 - 90 200 2 30 - 40 200 2 120 - 180 200 2 150 - 210 200 2 60 - 90 175 2 about 240 200 2 60...

How to use the grill Lay the food in the wire shelf or in a tray in case of small pieces. The rack must be positioned in the highest runner possible and the grease drip pan in the runner below. Close the door and turn on the grill. CAUTION: WHILE THE GRILL IS OPERATING, THE ACCESSIBLE PARTS ARE VERY...

Pic. 3 Pic. 4 Programming your oven with mechanical 60 minutes timer - Pic. 3 The regulating knob (pic. 3) must be turned in a clockwise direction until it reaches the 60 minutes position and then turned to the desired time by turning the knob in a counter clockwise direction. The oven will not be t...

Analog timer - Pic. 6 Setting the clock: to set the clock, press and turn the knob “A” in a clockwise or anticlockwise direction. Analog programmer - Pic. 5 Regulate time by pressing and turning the knob "A" anti-clockwise. Select the beginning of cooking time by pulling and turning the knob...

Digital clock Clock numbers show hours (0-24) andminutes.Upon immediate hooking up of the oven orafter a blackout, three zeros will flash onthe programmer panel.To set the hour it is necessary to pushsimultaneously the + buttons andAT THE SAME TIME to push the [+] buttonor [-] until you have set the...

Timer = buzzer The timer program consists only of a buzzerwhich may be set for a maximum period of23 hours and 59 min.To set the timer, push the button and,at the same time, [ + ] or [ - ] until you readthe desired time on the display.After the setting, the clock hour and thesymbol will appear. The ...

USING THE ELECTRONIC PROGRAMMER (pic. 8) F UNC T I O N Timer Minus setting Temperature Setting the clock Switch the oven on ; 00.00 will appear in blinking mode on the display. the display. To set the clock, simultaneously press the durationand end of cooking keys together. Using the +/- keys on the...

Semiautomatic operation with cooking duration Select cooking duration function and set required duration withthe +/- keys on the right . “AUTO” (B) and cookpot (C) symbols appear. If t ime of day = cooking end time the r ela y output and the cookpot symbol (C) are switched off. The audible signal so...

At 13.15 h. (14.00 h. minus 45 minutes ) the oven turns onautomatically. During cooking time the cookpot button (C) and“AUTO” (B) switch on. At 14.00 h. the oven turns off automatically, “AUTO” (B)flashes. The cookpot button (C) switches off and a buzzer goeson until it is stopped. Minute counter Se...

Switch functions The following functions can be set by turning the switch knob. The following will be shown on the display: Light 190°C 50°C 190°C 250°C 165°C 165°C 165°C Defrost The temperature shown on the display can be changed via the keys+/- on the left . Increase or decrease is in 5°C steps, f...

TEMPERATURE DISPLAY TIMER DISPLAY COOKING FUNCTIONS DISPLAY ELECTRONIC PROGRAMMER 2 4

The turning plate (pics. 10-13) The turning plate works combined with the radial fan, as it can be found in the oven functions descriptions. On the bottom of the oven cavity is fixed the flange with the motor ofthe turning plate (pic. 10); The appliance is equipped with the following parts: - a supp...

Replacing the oven light - Pic. 14 The oven is equipped with a lamp having thefollowing features: 25W screw cap E-14 T 300 ° C WARNING : disconnect the appliance from the power supply.lf the oven light needs to be replaced, theprotective cover «A» must be removed byturning it anticlockwise. After th...

REMOVING THE OVEN DOOR INNER GLASS PANEL (pics. 16-17) Pic. 16 Pic. 17 34

The door can be hooked on both sides REMOVING AND REFITTING THE OVEN DOOR (pics. 18-23) Release position Block position Setting screw 18 19 20 35 35

21 22 23 Release position Block position Warning: once completed the operation, check the door is correctly hooked. NOTE: Do not place heavy objects on (max 20 Kg)or lean on the oven door when open as this can cause damage to the hinges. 3 6

Cleaning and maintenance Important: before carrying out maintenance on the oven, it must always be unplugged from the power supply or disconnected from the mains via the electrical system master switch. Wait the appliance to cool down before proceeding with any cleaning operation. Do not use abrasiv...