Flymo Mini Trim - Manuals

4 To feed the nylon line 1. Press and hold the two latches (H) . 2. Gently pull the line until it reaches the line cutter.3. Release the two latches. Check that the spool is locked in position. 4. If too much line has been fed out, press the two latches and turn the spool anti-clockwise until thelin...

5 Automatic Line Feed System How the automatic line feed works (M) 1. When initially switching on the trimmer, a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter. DO NOT BE ALARMED this is quite normal. After approximately 5 seconds the ...

6 Maintenance Environmental Information After you have finished using your Flymo Mini-Trimfollow the procedure below:1. Disconnect from the mains electricity supply. 2. Never clean your trimmer with water, cleaning flu- ids, or solvents, just remove debris with a suitabletool, a soft brush or dry cl...

Newton Aycliffe, 06/05/2003M. Bowden,Research & Development Director A D 93 dB(A) E 91 dB(A) F 77.4 dB(A) G 4.59 m/s 2 H 2.1 kg ET21 A D 93 dB (A) E 91 dB (A) F 82.9 dB(A) G 4.85 m/s 2 H 2.5 kg ET23DX A D 93 dB (A) E 91 dB (A) F 82.9 dB(A) G 4.85 m/s 2 H 3.1 kg ET23+DX 5119436-02 Electrolux Outd...