Fagor SFA-8CELX - Manuals - manualsarea.com

Page 2 - •IMPORTANT SAFETY INSTRUCTIONS; follow basic precautions, including the following :; Grounding instructions; learn how to use it as quickly as possible.

3 1 / FOR THE USER’S ATTENTION EN 2 CONTENTS EN 1 / FOR THE USER’S ATTENTION • Important safety instructions ______________________________ 3 • Energy savings ________________________________________ 5 2 / DESCRIPTION OF YOUR APPLIANCE • General presentation of the tumble dryer ____________________ ...

Page 3 - •ENERGY SAVINGS; / FOR THE USER’S ATTENTION; Keep these operating instructions with; SAFETY INSTRUCTIONS; Installation; Your tumble dryer is designed for

5 EN 4 EN 1 / FOR THE USER’S ATTENTION — Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers,turpentine or wax must be removed before drying in your machine (by using an adapted warm waterwashing programme with additional detergent for example).— Precautio...

Page 4 - / INSTALLING YOUR TUMBLE DRYER; • THE APPLIANCE’S SURROUNDINGS; We strongly advise against :; Use a level to check that the appliance; • LEVELLING; / DESCRIPTION OF YOUR APPLIANCE; • GENERAL PRESENTATION OF THE TUMBLE DRYER

7 EN 6 EN 3 / INSTALLING YOUR TUMBLE DRYER Fig. 03 Fig. 02 • THE APPLIANCE’S SURROUNDINGS Important : We strongly advise against : — Installing your appliance on a carpeted floor.If you cannot avoid this, take all possible mea-sures not to obstruct the circulation of air atits base.— Installing your...

Page 5 - • BUILT-IN INSTALLATION; sons, fitting must be performed by a qualified professional.; • COMBINED WASHER/DRYER INSTALLATION

9 EN 8 3 / INSTALLING YOUR TUMBLE DRYER EN 3 / INSTALLING YOUR TUMBLE DRYER • BUILT-IN INSTALLATION An adaptation kit is available from your dealer. This is used to mount your tumble dryer above yourwashing machine. • MODIFYING THE DOOR OPENING DIRECTION Important : Check with your dealer that the k...

Page 6 - / PREPARING YOUR ITEMS; • CHECKING THE CONDITION OF YOUR TEXTILES; Recommended volumes :; • INSERTING YOUR ITEMS IN THE DRUM; If, before you insert your clothes in the; Preparing your items :; Check the labels on your textiles; • ELECTRICAL CONNECTION; To make the electrical connection to your appliance :; • REPLACING THE ELECTRIC POWER CABLE; team or a qualified professional.

11 EN 10 EN 4 / PREPARING YOUR ITEMS • CHECKING THE CONDITION OF YOUR TEXTILES — Open the door by pushing (press where thelabel is) (Fig. 06). — Check that the filter is in its housing .— Insert washed and spun clothes loosely inthe drum w wiitth ho ou utt ffo olld diin ng g iitt o orr p piilliin ng...

Page 7 - • PRESENTATION OF THE CONTROL PANEL; The

13 EN 12 EN 5 / OPERATING INSTRUCTIONS AND PROGRAMMING Program stop Time remaining Time remaining until drying cycle begins Delayed start • Delaying a program’s start : Select your program using the program dial . The indicator light shows you the program you have selected.Press the ”Delay timer +” ...

Page 8 - • Stopping the appliance :

15 EN 14 EN Program stop The ”Tank Full” light illuminates. 5 / OPERATING INSTRUCTIONS AND PROGRAMMING • Cooling cycle : All programs finish with a cooling cycle thatlasts for a few minutes to allow the washing tocool gradually. Important : Do not stop your dryer before this cycle has finished. • Du...

Page 9 - — Open the filter; • CLEANING THE FILTER; — Empty the container; • YOUR DRIER’S PROGRAMS

17 EN 16 EN 6 / USER-MAINTENANCE INSTRUCTIONS Important : Please remember that the filter must be cleaned after every drying. The filter is located in the lower part of yourdryer.Clean it as follows:— Remove it from its housing by pulling itupwards (Fig. 07) — Open the filter (Fig. 08) — Clean it by...

Page 10 - • CLEANING THE CONDENSER; — Remove it carefully; • CLEANING THE APPLIANCE; — Clip the deflector with the top of the pump

19 EN 18 EN Important : When refitting the condenser, ensure that it is pushed in firmly right to the back of its hou- sing when locking it in 6 / USER-MAINTENANCE INSTRUCTIONS Fig. 21 • CLEANING THE CONDENSER Fig. 18 Fig. 19 Fig. 20 Important : The condenser must be cleaned twice a month. Important...

Page 11 - ORIGINAL PARTS; • INTERVENTIONS; • CHANGING THE BULB; Unplug the power cord before chan-; The dryer does not start :; The “Tank Full” indicator light is lit :

EN 20 EN 8 / AFTER-SALES SERVICE Fig. 22 21 Fig. 23 Any work on your appliance must be perfor- med by a brand approved qualified professio-nal. When you call, mention your appliance’sfull reference (model, type, serial number).These details are shown on the manufacturer’sinformation plate (Fig. 22)....