Page 3 - Controls and Jacks; SYMBOLS
MN15A-en-US_1.4 4/15 3 Controls and Jacks 1. LCD display 2. Rotary function switch 3. 10 ampere test lead jack 4. Test lead jack for voltage, milliamp, resistance/continuity, diode and temperature functions 5. COM test lead jack 6. Battery compartment (rear) SYMBOLS •))) Continuity Diode AC DC M meg...
Page 4 - Operating Instructions
MN15A-en-US_1.4 4/15 4 Operating Instructions WARNING : Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. NOTE : On some low AC and DC voltage ranges, with the test leads not connected to a device, the display may show a random, ...
Page 5 - COM
MN15A-en-US_1.4 4/15 5 DC CURRENT MEASUREMENTS CAUTION : Do not make current measurements at 10 Amps for longer than 30 seconds. Exceeding 30 seconds may cause damage to the meter and/or the test leads. 1. Insert the black test lead banana plug into the negative COM jack. 2. For current measurements...
Page 8 - Maintenance
MN15A-en-US_1.4 4/15 8 Maintenance WARNING : To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery or fuse covers. WARNING: To avoid electric shock, do not operate your meter until the battery and fuse covers are in place and fast...
Page 9 - Range Specifications; Notes
MN15A-en-US_1.4 4/15 9 Range Specifications Function Range Resolution Accuracy DC Voltage (V DC) 200mV 0.1mV (0.5% reading + 2 digits) 2000mV 1mV 20V 0.01V 200V 0.1V (0.8% reading + 2 digits) 600V 1V AC Voltage (V AC) 200V 0.1V (1.2% reading + 10 digits (50/60Hz) 600V 1V DC Current (A DC) 200m...
Page 10 - General Specifications
MN15A-en-US_1.4 4/15 10 General Specifications Diode Test Bias voltage: 2.8VDC typical Continuity Check Audible signal will sound if the resistance is less than 100 Input Impedance 1M Ω (VDC & VAC) AC Bandwidth 50 / 60Hz Display 2000 count (0 to 1999) LCD Overrange indication “1___” is display...
Page 11 - Copyright; ISO
MN15A-en-US_1.4 4/15 11 Warranty FLIR Systems, Inc. warrants this Extech Instruments brand device to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies to sensors and...
Page 12 - Certifié
MN15A-en-US_1.4 4/15 12 Garantie FLIR Systems, Inc. garantit que cet appareil Extech Instruments est exempt de défauts matériaux et de fabrication pendant un an à partir de la date d’envoi (une garantie limitée de six mois s’applique ...
Page 13 - Garantía; Servicios; Certificado
MN15A-en-US_1.4 4/15 13 Garantía FLIR Systems, Inc. , garantiza este dispositivo marca Extech Instruments para estar libre de defectos en partes o mano de obra durante un año a partir de la fecha de embarque (se aplica una garantía ...