EverFocus EHD360 - Manuals

EverFocus EHD360 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - and in an IP66; Mounting; OVERVIEW; Color dome camera with SONY 1/3” Super HAD CCD sensor.; PACKAGE CONTENTS

1 Use the camera at temperatures within -10°C to +50°C (14°F to 122°F) and in an IP66 compliant environment; this device is not rated as submersible. The input power source is 12VDC. Be sure to connect the proper + / - polarity and voltage, as incorrect polarity or too high a voltage will likely cau...

Page 5 - save the plug as it will be used to close the rear conduit hole.; Conduit plug

4 3. Tighten the 4 mounting screws to secure the camera body to the mounting surface. 3. If you need to wire cable through side conduit hole, use a coin to remove the conduit plug ; save the plug as it will be used to close the rear conduit hole. 4. Disconnect the power and video wire from the camer...

Page 6 - General Connection and Setup; reverse polarity will damage the camera and void the warranty).; If you move the camera module; , it is necessary to loosen the dome and liner and; Lens adjustment

5 6. (Optional) Pass the power/video wire under the base plate and up through the center hole. 7. Position the power/video wire so that it does not interfere with the camera module and carefully attach the connector to the camera board, being sure to position the connector so it fit properly onto th...

EverFocus Manuals