Enterasys Networks 4H4202-72 - Manuals

iv ѻ ѻક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ໮⒈㘨㣃 3%% ໮⒈Ѡ㣃䝮 3%'( 䞥ሲ䚼ӊ (Metal Parts) h ƻ ƻ h ƻ ƻ ⬉䏃῵ഫ ( Circuit Modules) h ƻ ƻ h ƻ ƻ ⬉㓚ঞ⬉㓚㒘ӊ ( Cables & Cable Assemblies) h ƻ ƻ h ƻ ƻ ล᭭੠㘮ড়⠽䚼ӊ (Plastic and Polymeric parts...

vi Declaration of Conformity Application   of   Council   Directive(s): 89/336/EEC73/23/EEC Manufacturer ’s   Name: Enterasys Networks, Inc. Manufacturer ’s   Address: 50   Minuteman   Road Andover,   MA   01810 USA European   Representative   Address: Enterasys Networks,   Ltd. Nexus   House,   New...

vii Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This   document   is   an   agreement   (“Agreement”)   between   the   end   user   (“You”)   and   Enterasys Networks, Inc.   on   behalf   of   itself  ...

ix 8. AUDIT   RIGHTS. You   hereby   acknowledge   that   the   intellectual   property   rights   associated   with   the   Program   are   of   critical   value   to   Enterasys   and,   accordingly,   You   hereby   agree   to maintain   complete   books,   records   and   accounts   showing   (i...

xi Contents About This Guide Who Should Use This Guide ............................................................................................................... xvHow to Use This Guide ................................................................................................................

xii Connecting to COM Port for Local Management ............................................................................. 3-20 What Is Needed ......................................................................................................................... 3-20Connecting to an IBM PC or C...

xiii Figures 1-1 4H4282-49, 4H4283-49, and 4H4203-72 DFE-Gold Modules......................................................1-4 1-2 4H4202-72 and 4H4284-49 DFE-Gold Modules ..........................................................................1-5 3-1 Examples, Slot Numbers/Module Placement in Mat...

xiv Tables 3-1 Contents of DFE-Gold Module Carton..........................................................................................3-2 4-1 LANVIEW LEDs............................................................................................................................4-5 4-1 Troublesh...

Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide xv About This Guide This   guide   provides   an   overview,   installation   and   troubleshooting   instructions,   and   specifications   for   the   Enterasys   Matrix™   DFE ‐ Gold   4H4282 ‐ 49,   4H4283 ‐ 49,   4H4203 ‐ 72, ...

How to Use This Guide xvi About This Guide How to Use This Guide This   preface   provides   an   overview   of   this   guide   and   the   DFE ‐ Gold   Series   manual   set,   and   a   brief   summary   of   each   chapter;   defines   the   conventions   used   in   this   document;   and   ins...

Conventions Used in This Guide Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide xvii Conventions Used in This Guide The   following   conventions   are   used   in   this   guide: Lowercase   x :   Indicates   the   general   use   of   an   alphanumeric   character   (for   exam...

Getting Help xviii About This Guide Getting Help For   additional   support   related   to   the   modules   or   this   document,   contact   Enterasys Networks   using   one   of   the   following   methods: Before   contacting   Enterasys Networks   for   technical   support,   have   the   follo...

Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-1 1 Introduction This   chapter   provides   an   overview   of   the   DFE ‐ Gold   module   capabilities,   and   introduces   the   4H4282 ‐ 49,   4H4283 ‐ 49,   4H4203 ‐ 72,   4H4202 ‐ 72,   and   4H4284 ‐ 49   DFE ‐ Gold   m...

Connectivity 1-6 Introduction Connectivity 4H4282-49 Depending   on   how   the   4H4282 ‐ 49   ( Figure 1 ‐ 1 )   is   configured,   it   can   support   up   to: • 48,   10BASE ‐ T/100BASE ‐ TX   switched   ports   connected   through   48   fixed,   RJ45   front ‐ panel   connectors,   or • 48,  ...

Management Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 1-7 Management Management   of   the   module   can   be   either   in ‐ band   or   out ‐ of ‐ band.   In ‐ band   remote   management   is   possible   using   Telnet,   Enterasys Networks’   NetSight ®   management   ...

LANVIEW Diagnostic LEDs 1-8 Introduction • Network   Services   are   logical   groups   of   Classification   Rules   that   identify   specific   networked   applications   or   services.   Users   may   be   permitted   or   denied   access   to   these   services   based   on   their   role   wi...

Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide 2-1 2 Network Requirements Before   installing   the   module,   review   the   requirements   and   specifications   referred   to   in   this   chapter   concerning   the   following: • 10BASE ‐ T   Network   (page 2 ‐ 1) • 100BA...

Matrix DFE-Gold Series Modules Hardware Installation Guide 3-1 3 Installation This   chapter   provides   the   instructions   to   install   the   4H4282 ‐ 49,   4H4283 ‐ 49,   4H4203 ‐ 72,   4H4202 ‐ 72,   and   4H4284 ‐ 49 DFE ‐ Gold modules. Follow   the   order   of   the   sections   listed   ...

Installation Site Requirement 3-2 Installation Installation Site Requirement The   DFE ‐ Gold module   must   be   installed   in   a   Matrix   E7,   N1,   N3,   N5,   or   N7   chassis   located   in   a   Restricted   Access   Location   (RAL).   This   location   should   only   be   accessible ...

Installing Optional Network Expansion Module Matrix DFE-Gold Series Modules Hardware Installation Guide 3-3 Installing Optional Network Expansion Module A   Phillips   screwdriver   is   required   to   install   an   optional   network   expansion   module   into   the   4H4282 ‐ 49,   4H4283 ‐ 49,...

DFE Module Placement and Installation Rules 3-4 Installation To   ensure   proper   operation   of   the   system,   consider   the   following   examples   and   rules   for   module   placement   in   either   chassis. Example 1 ( Figure 3-1 , A) Shows   one   module   installed   in   the   chass...

Installing Module into a Chassis Matrix DFE-Gold Series Modules Hardware Installation Guide 3-5 Example 3 ( Figure 3-1 , C) Shows   the   primary   management   module   missing   from   slot   1.   As   long   as   the   module   installed   in   slot   2   is   designated   as   a   redundant   ma...

Installing Module into a Chassis 3-6 Installation Preparation 1. Remove   the   blank   panel   covering   the   slot   in   which   the   module   will   be   installed.   All   other   slots   must   remain   covered   to   ensure   proper   airflow   for   cooling.   (Save   the   blank   plate  ...

Installing Module into a Chassis Matrix DFE-Gold Series Modules Hardware Installation Guide 3-9 Installing Module into Matrix N1, N3, or N5 Chassis A   DFE ‐ Gold module   can   be   installed   in   any   available   chassis   slot   (1   through   3)   in   the   Matrix N3   chassis   or   slots  ...

Connecting to the Network 3-10 Installation Connecting to the Network For   connecting   unshielded   twisted   pair   (UTP)   segments   from   the   network   or   other   devices,   refer   to • Connecting   UTP   Cables   to   4H4282 ‐ 49   or   4H4202 ‐ 72   (page 3 ‐ 11) • Connecting   UTP   C...

Connecting to the Network 3-12 Installation 3. Verify   that   a   link   exists   by   checking   that   the   port   RX   (Receive)   LED   is   ON   (flashing   amber,   blinking   green,   or   solid   green).   If   the   RX   LED   is   OFF   and   the   TX   (Transmit)   LED   is   not   blin...

Connecting to the Network Matrix DFE-Gold Series Modules Hardware Installation Guide 3-17 Figure 3-10 Connection Using Optional RJ21 Angle Adapter 1 RJ21 angle adapter 5 Retaining clips 2 RJ21 port connector 6 GROUP SELECT button 3 Retaining screws 7 Example showing how multiple cables would be arra...

Connecting to COM Port for Local Management 3-20 Installation 1. Verify   that   a   link   exists   by   checking   that   the   port   RX   LED   is   ON   (flashing   amber,   blinking   green,   or   solid   green).   If   the   RX   LED   is   OFF   and   the   TX   LED   is   not   blinking   ...

Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-21 With   a   UTP   straight ‐ through   cable   and   RJ45 ‐ to ‐ DB25   female   adapter,   you   can   connect   products   equipped   with   an   RJ45   COM   port   to   a   VT   series   te...

Connecting to COM Port for Local Management 3-22 Installation Connecting to a VT Series Terminal To   connect   a   VT   Series   terminal   to   an   Enterasys Networks   DFE ‐ Gold module   COM   port   ( Figure 3 ‐ 13 ),   use   a   UTP   straight ‐ through   cable   with   RJ45   connectors   an...

Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-23 When   these   parameters   are   set,   the   Local   Management   password   screen   will   display.   Refer   to   the   Enterasys   Matrix   DFE ‐ Gold   Series   Configuration   Guide   ...

Connecting to COM Port for Local Management Matrix DFE-Gold Series Modules Hardware Installation Guide 3-25 Adapter Wiring and Signal Assignments COM Port Adapter Wiring and Signal Diagram RJ45 DB9 Pin Conductor Pin Signal 1 Blue 2 Receive (RX) 4 Red 3 Transmit (TX) 5 Green 5 Ground (GRD) 2 Orange 7...

Completing the Installation 3-26 Installation Completing the Installation Completing   the   DFE   module   installation   depends   on   if   the   module   is   being   installed   in: • a   new   DFE   module   system   (refer   to   “Completing   the   Installation”   on   page 3 ‐ 26),   or • a...

Completing the Installation Matrix DFE-Gold Series Modules Hardware Installation Guide 3-27 First-Time Log-In Using a Console Port Connection Start   the   Command   Line   Interface   (CLI)   from   the   module’s   local   console   port   as   follows: 1. Connect   a   terminal   to   the   local...

Completing the Installation 3-28 Installation Completing the Installation of a DFE-Gold Module in an Existing System In   an   established   DFE ‐ Gold module   system, • a   DFE ‐ Gold module   is   already   established   as   the   management   module, • the   passwords   have   already   been   ...

Completing the Installation Matrix DFE-Gold Series Modules Hardware Installation Guide 3-29 Logging in with an Administratively-Configured User Account If   the   device’s   default   user   account   settings   have   been   changed,   proceed   as   follows: 1. At   the   login   prompt,   enter  ...

Matrix DFE-Gold Series Modules Hardware Installation Guide 4-1 4 Troubleshooting This   chapter   provides   information   concerning   the   following: • Using   LANVIEW   (page 4 ‐ 1) • Troubleshooting   Checklist   (page 4 ‐ 7) • Overview   of   DFE ‐ Gold   Module   Shutdown   Procedure   (page ...

Using LANVIEW 4-2 Troubleshooting Viewing Receive/Transmit Activity on 4H4282-49, 4H4283-49, and 4H4203-72 On   the   4H4282 ‐ 49,   4H4283 ‐ 49,   and   4H4203 ‐ 72   you   can   view   the   receive   and   transmit   activity   on   the   RX   and   TX   LEDs.   However,   only   one   group   of...

Using LANVIEW 4-4 Troubleshooting Viewing the Receive and Transmit Activity on 4H4284-49 On   the   4H4284 ‐ 49   DFE ‐ Gold module,   you   can   view   the   receive   and   transmit   activity   on   the   RX   and   TX   LEDs.   However,   only   one   group   of   12   ports   may   be   viewed...

Using LANVIEW Matrix DFE-Gold Series Modules Hardware Installation Guide 4-5 Table 4-1 LANVIEW LEDs LED Color State Recommended Action MGMT None Off . This module is NOT the Management Module. None. Green Solid . This module is the designated Management Module. None. Amber Flashing . This is a tempo...

Using LANVIEW 4-6 Troubleshooting RX(Receive) None No link . No activity. Port enabled or disabled. None. Green Solid . Link present, port enabled, no traffic is being received by the interface. None. Amber Flashing . Link present, port enabled, traffic is being received by the interface. Rate of fl...

Troubleshooting Checklist Matrix DFE-Gold Series Modules Hardware Installation Guide 4-7 Troubleshooting Checklist If   the   module   is   not   working   properly,   refer   to   Table 4 ‐ 1   for   a   checklist   of   problems,   possible   causes,   and   recommended   actions   to   resolve   ...

Troubleshooting Checklist 4-8 Troubleshooting Port(s) goes into standby for no apparent reason. Loop condition detected. Verify that Spanning Tree is enabled. Refer to the Enterasys Matrix DFE-Gold Series Configuration Guide for the instructions to set the type of STA. Review the network design and ...

Overview of DFE-Gold Module Shutdown Procedure Matrix DFE-Gold Series Modules Hardware Installation Guide 4-9 Overview of DFE-Gold Module Shutdown Procedure The   DFE ‐ Gold module s   installed   in   a   Matrix   N3   or   Matrix   N7   chassis   are   interdependent   and   operate   under   a   ...

Overview of DFE-Gold Module Shutdown Procedure 4-10 Troubleshooting Recommended Shutdown Procedure Using OFFLINE/RESET Switch Before   pulling   a   DFE ‐ Gold module   out   of   a   chassis,   press   or   tap   on   its   OFFLINE/RESET   switch   for   less   than   1 second.   Its   CPU   LED   ...

Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide A-1 A Specifications This   appendix   provides   information   about   the   following: • DFE ‐ Gold   Module   Specifications   (page A ‐ 1) • COM   Port   Pinout   Assignments   (page A ‐ 3) • Regulatory   Compliance   (page A ‐...

DFE-Gold Module Specifications A-2 Specifications 4H4203-72 Ports 1 through 72 Seventy-two, 10BASE-T/100BASE-TX compliant ports through six RJ21 connectors. 4H4202-72 Ports 1 through 72 Seventy-two, 10BASE-T/100BASE-TX compliant ports through 72 RJ45 connectors. 4H4284-49 Ports 1 through 48 Forty-ei...

COM Port Pinout Assignments Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide A-3 COM Port Pinout Assignments The   COM   port   is   a   serial   communications   port   for   local   access   to   Local   Management.   Refer   to   Table A ‐ 2   for   the   COM   port   pin   as...

Regulatory Compliance A-4 Specifications Regulatory Compliance The   4H4282 ‐ 49,   4H4283 ‐ 49,   4H4203 ‐ 72,   4H4202 ‐ 72,   4H4284 ‐ 49,   and   7G ‐ 6MGBIC   meet   the   safety   and   electromagnetic   compatibility   (EMC)   requirements   listed   in   Table A ‐ 3 : Table A-3 Compliance St...

Matrix DFE-Gold Series Modules Hardware Installation Guide B-1 B Mode Switch Bank Settings and Optional Installations This   appendix   covers   the   following   items: • Required   Tools   (page B ‐ 1) • Setting   the   Mode   Switches   (page B ‐ 2) • Memory   Locations   and   Replacement   Proc...

Setting the Mode Switches B-2 Mode Switch Bank Settings and Optional Installations Setting the Mode Switches Figure B ‐ 1   and   Figure B ‐ 2   show   the   location   of   the   mode   switches   and   the   switch   settings   for   normal   operation.   These   switches   are   set   at   the   ...

Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-5 Memory Locations and Replacement Procedures In   the   event   that   the   Dual   In ‐ line   Memory   Module   (DIMM)   or   DRAM   Single   In ‐ line   Memory   Module   (SIMM)   (FLASH   me...

Memory Locations and Replacement Procedures B-6 Mode Switch Bank Settings and Optional Installations Figure B-6 DIMM and DRAM SIMM Locations (4H4203-72) 1 DRAM SIMM 2 DIMM 3 Main PC board Figure B-7 DIMM and DRAM SIMM Locations (4H4202-72) 1 DRAM SIMM 2 DIMM 3 Main PC board  À Á G R O U P 1 G R O U...

Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-7 DIMM Replacement Procedure (4H4282-49 and 4H4283-49) To   remove   and   replace   the   DRAM   SIMM   on   the   4H4282 ‐ 49   or   4H4283 ‐ 49,   refer   to   Figure B ‐ 8   and   Figure B ‐ ...

Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-9 Removing the DRAM SIMM from 4H4203-72 To   remove   the   existing   DRAM   SIMM,   proceed   as   follows: 1. Locate   the   DRAM   SIMM   connector   on   the   main   PC   board.   Refer   b...

Memory Locations and Replacement Procedures B-12 Mode Switch Bank Settings and Optional Installations DIMM Replacement Procedure (All DFE Modules) In   the   event   that   the   DIMM   needs   to   be   replaced,   the   following   sections   explain   how   to   remove   and   install   the   DIM...

Memory Locations and Replacement Procedures Matrix DFE-Gold Series Modules Hardware Installation Guide B-13 Installing the DIMM To   install   a   DIMM,   refer   to   Figure B ‐ 14   and   proceed   as   follows: 1. Insert   the   DIMM   down   between   the   connector   fingers. 2. Pivot   the   ...

Index-1 Index Numerics 100BASE-FX connections 3-18 requirements 2-2 100BASE-TX connections 3-11 requirements 2-2 10BASE-T connections 3-11 , 3-15 requirements 2-1 4H4202-72 introduction to 1-3 4H4203-72 introduction to 1-3 4H4282-49 introduction to 1-2 4H4283-49 introduction to 1-2 4H4284-49 introdu...