Page 2 - ii; Notice
ii Aurorean Network Gateway-1100 User’s Guide Notice Enterasys Networks and its licensors reserve the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such...
Page 3 - iii
Aurorean Network Gateway-1100 User’s Guide iii Federal Communications Commission (FCC) Notices The Aurorean Network Gateway-1102/1105 complies with Title 47 Part 15, Class B of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.• This de...
Page 4 - iv; Only qualified personnel should perform installation
iv Aurorean Network Gateway-1100 User’s Guide ELECTRICAL HAZARD: Only qualified personnel should perform installation procedures. Important Safety Instructions 1) Read these instructions carefully. Save these instructions for future reference. 2) Follow all warnings and instructions marked on the pr...
Page 5 - About This Guide
Table of Contents Table of Contents Table of Contents Table of Contents Aurorean Network Gateway-1100 User’s Guide v About This Guide Contents of the Guide ........................................................................................................... ix Conventions Used in This Guide......
Page 6 - Table of Contents
Table of Contents vi Aurorean Network Gateway-1100 User’s Guide Chapter 3 – Configuring the ANG-1100 with Aurorean Web Config Before You Begin .............................................................................................................11 Logging into Web Config ........................
Page 7 - vii; Index
Table of Contents Aurorean Network Gateway-1100 User’s Guide vii United States Government Restricted Rights ....................................................................57 Exclusion of Warranty ......................................................................................................
Page 9 - ix; Contents of the Guide; Information in this guide is arranged as follows:
Aurorean Network Gateway-1100 User’s Guide ix About This Guide About This Guide About This Guide About This Guide This guide describes how to mount, connect, power-up, and maintain an Aurorean™ Network Gateway-1100 (ANG-1102/1105) from Enterasys Networks. This guide is written for administrators who...
Page 10 - Conventions Used in This Guide; NOTE; Italics; SMALL CAPS; Courier font
x Aurorean Network Gateway-1100 User’s Guide Conventions Used in This Guide About This Guide Conventions Used in This Guide The following conventions are used in this guide: NOTE Notes supply additional helpful information, provide a cross-reference to the source of more information, or emphasize is...
Page 11 - xi; Related Publications; manuals
Aurorean Network Gateway-1100 User’s Guide xi About This Guide Related Publications Related Publications The following publications are also available with the Aurorean Network Gateway-1100: ! The ANG-1102/1105 Quick Setup card which highlights the basic steps required to install the Aurorean Networ...
Page 13 - Overview; System Description; Figure 1
Aurorean Network Gateway-1100 User’s Guide 1 1 Overview Overview Overview Overview This chapter describes the key features of the Aurorean Network Gateway 1100 and how it is used. System Description The ANG-1100, displayed in Figure 1, provides home or small office connectivity to a corporate branch...
Page 14 - Chapter 1; Figure 2; An ANG-1100 comes equipped with the following:; Firewall; INTERNET; RiverMaster; Hub
2 Aurorean Network Gateway-1100 User’s Guide System Description Chapter 1 Overview Figure 2 ANG-1102/1105 Topology An ANG-1100 comes equipped with the following: ! 110-250V power supply. ! High-performance CPU: 90 MHz internal, 45 MHz external. ! Complete set of diagnostic LEDs which display the ser...
Page 15 - Installation; Figure 3
Aurorean Network Gateway-1100 User’s Guide 3 2 Installation Installation Installation Installation This chapter describes the steps required to unpack, install and connect an Aurorean Network Gateway-1102/1105 onto a desktop. Unpacking the ANG-1102/1105 Remove the ANG-1102/1105 from the shipping box...
Page 16 - Chapter 2; Figure 4; Accessories
4 Aurorean Network Gateway-1100 User’s Guide Unpacking the ANG-1102/1105 Chapter 2 Installation The box contains a CD ROM with this instruction manual in the Adobe PDF format, a Quick Setup card and accessories. See an illustration of the ANG-1105 below. Figure 4 ANG-1105 Accessories The ANG-1100 al...
Page 17 - Connecting Cables; then be re-entered. Do not use the Reset button unless you want the; settings before using the Reset button.; Ethernet Connections; Figure 5; POWER
Aurorean Network Gateway-1100 User’s Guide 5 Chapter 2 Connecting Cables Installation Connecting Cables Ethernet cables are used to connect the ANG-1100 to your computer or LAN and the Internet. A serial cable can be used to connect the ANG-1105 to your computer for diagnostic purposes. All intercon...
Page 18 - Figure 6; Do one of the following as shown in Figure 7:; Aurorean Network
6 Aurorean Network Gateway-1100 User’s Guide Connecting Cables Chapter 2 Installation Connecting an ANG-1102/1105 The ANG-1100 is typically set up in the configuration shown below. Figure 6 Connecting the ANG-1100 To connect the ANG-1100 Ethernet port, perform the following steps: 1 Do one of the fo...
Page 19 - Figure 7; Plug an Ethernet cable into the External port as shown in Figure 7.; Serial Connection; OR
Aurorean Network Gateway-1100 User’s Guide 7 Chapter 2 Connecting Cables Installation Figure 7 Connecting Cables to the ANG-1100 (ANG-1105 shown) 3 Plug an Ethernet cable into the External port as shown in Figure 7. 4 Plug the opposite end of this cable into a DSL or cable modem. NOTE If you have a ...
Page 20 - WARNING; Figure 8
8 Aurorean Network Gateway-1100 User’s Guide Connecting Power to the ANG-1102/1105 Chapter 2 Installation Connecting Power to the ANG-1102/1105 WARNING To avoid electrical shock, connect the Aurorean system to a grounded (earthed) outlet only. A switching power supply including a 6’ power cord and a...
Page 21 - Figure 9; Connecting the Power Cable to the Power Supply; Power supply
Aurorean Network Gateway-1100 User’s Guide 9 Chapter 2 Connecting Power to the ANG-1102/1105 Installation 2 Plug the AC power cord into the power supply and the other end into a grounded AC outlet or UPS as shown in Figure 9. The Power LED on the ANG-1100 will light the moment you power up the unit....
Page 22 - LED behavior
10 Aurorean Network Gateway-1100 User’s Guide Checking ANG-1102/1105 Connections Chapter 2 Installation Checking ANG-1102/1105 Connections The ANG-1100 is now connected and ready for configuration. Check the LEDS in the manner described below to confirm that the connections are working properly. LED...
Page 23 - Configuring the ANG-1100 via Aurorean Web Config; Before You Begin; The IP address of the ANG-3000/7000 you will connect to for
Aurorean Network Gateway-1100 User’s Guide 11 3 Configuring the ANG-1100 with Configuring the ANG-1100 with Configuring the ANG-1100 with Configuring the ANG-1100 with Aurorean Web Config Aurorean Web Config Aurorean Web Config Aurorean Web Config To configure the ANG-1100, use the Internet browser ...
Page 24 - Chapter 3; the IP address for all adaptors
12 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config – To configure your PC to include the domain of the corporate network you will connect to. To do so on your Windows 95/98/ME/2000 desktop: click Start, select Settings and double-click Control P...
Page 25 - Logging into Web Config; To log into Web Config, perform the steps below.; netadmin; in the User Name and Password fields as shown in
Aurorean Network Gateway-1100 User’s Guide 13 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Logging into Web Config To log into Web Config, perform the steps below. 1 Point your Web browser at the default trusted IP address of the ANG-1100. In the browser’s Location field at the top of...
Page 26 - Setting Your Password; Aurorean Network Gateway
14 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Setting Your Password Because the default password is readily available through all ANG-1100 documentation, we strongly recommend that you ensure security by configuring a new password to replac...
Page 27 - Viewing VPN Status; VPN Status Window
Aurorean Network Gateway-1100 User’s Guide 15 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Viewing VPN Status The VPN Status window is the first screen to appear after logging in. At this point, you have just begun configuration so the VPN Status window appears empty. Later, after you...
Page 28 - Setting Up the VPN; Begin VPN Setup by performing the following steps:
16 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Setting Up the VPN The VPN configuration created on the ANG-1100 completes a link with the ANG-3000/7000 on the remote end of this connection. If your network administrator has already set up th...
Page 29 - VPN Setup Window
Aurorean Network Gateway-1100 User’s Guide 17 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 14 VPN Setup Window 2 Enter the Name of the remote ANG-3000/7000 you are connecting to. 3 Enter the Gateway IP address of the remote ANG-3000/7000. 4 Enter the Username on the remote ANG-...
Page 31 - Optional
Aurorean Network Gateway-1100 User’s Guide 19 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config 9 Optional . Check the Start network gateway now checkbox and click Apply to create instant access or wait until the other end of the connection is created. 10 Optional . Click Force default rou...
Page 32 - Setting Up the Internet Connection; Begin Internet Setup by performing the following steps:
20 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Setting Up the Internet Connection Internet configuration of the External side of the ANG-1100 involves choosing the type of IP address assignment the ANG-1100 will accept. The ANG can accept on...
Page 33 - Internet Setup Window
Aurorean Network Gateway-1100 User’s Guide 21 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 15 Internet Setup Window 2 Do one of the following: ! Click the DHCP radio button and perform the following steps: – Enter a Hostname for the system. – Optionally, check the Use hostname ...
Page 34 - Set the Secondary DNS IP address.
22 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config – Set the Secondary DNS IP address. – Click Apply. ! Click the PPPoE assigned IP address radio button and perform the following steps: – Specify a Username supplied by your cable/DSL provider. –...
Page 35 - Downloading the Latest Firmware; Click the Firmware Upgrade menu option.; Enter; in the Password and Confirm fields and click Apply.
Aurorean Network Gateway-1100 User’s Guide 23 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Downloading the Latest Firmware After logging in, download the latest firmware image to the ANG-1100’s flash memory (provided the MAC address is set for cable service users - refer to page 36) b...
Page 36 - Second Firmware Update Window
24 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 17 Second Firmware Update Window Help VPN Status VPN Setup VPN Connectivity Setup Internet Setup LAN SetupFirewall Setup ANG-1100 System Set Password Device Status Firmware Update Advance...
Page 37 - Successful Firmware Update Window
Aurorean Network Gateway-1100 User’s Guide 25 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config 7 After downloading and “flashing” are complete, a status page displays as shown in Figure 18 indicating the process was successful and displays the FTP server IP address and new build filepath....
Page 38 - Setting Up the LAN; Click the LAN Setup menu option.; LAN Address Assignment:
26 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Setting Up the LAN LAN configuration of the Trusted side of the ANG-1100 involves choosing either to manually set an IP address and subnet for the ANG-1100 or dynamically assign its IP address v...
Page 40 - Setting Up the Firewall
28 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Release and click OK. Then click Renew All and click OK. - For Windows NT/2000 systems, type i pconfig /release and press E NTER . Then type ipconfig /renew and press E NTER . - For Macintosh sy...
Page 41 - Begin Firewall Setup by performing the following steps:
Aurorean Network Gateway-1100 User’s Guide 29 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Begin Firewall Setup by performing the following steps: 1 Click the Firewall Setup menu option. The Firewall Setup window appears as shown in Figure 21. Figure 21 Firewall Setup Window 2 Enable ...
Page 43 - Set Password Window
Aurorean Network Gateway-1100 User’s Guide 31 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 22 Set Password Window 2 Type the old Password in the field provided. 3 Type a new Password in the field provided. 4 Confirm the new password in the field provided. 5 Click Apply. Aurorea...
Page 44 - Checking Device Status; CPU itemizes Motorola Coldfire chip specifications.
32 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Checking Device Status The Device Status window provides a host of important data to ensure the ANG-1100 is connected properly and to permit troubleshooting as problems occur. When consulting En...
Page 45 - Device Status Window
Aurorean Network Gateway-1100 User’s Guide 33 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 23 Device Status Window Help VPN Status VPN Setup VPN Connectivity Setup Internet Setup LAN SetupFirewall Setup ANG-1100 System Set Password Device Status Firmware UpdateAdvanced Utilitie...
Page 46 - Network Devices
34 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 24 Device Status Window (continued) Link encap: Local Loopbackinet addr: 127.0.01 Bcast: 127.255.255.255. Mask: 255.0.0.0UP BROADCAST LOOPBACK RUNNING MTU: 3584 Metric:1RX packets: 77 err...
Page 47 - Using Advanced Utilities; Advanced Utilities provided by the ANG-1100 include:; Advanced Utilities Window
Aurorean Network Gateway-1100 User’s Guide 35 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Using Advanced Utilities Advanced Utilities provided by the ANG-1100 include: ! Setting the MAC Address of a newly attached ANG-1100 when you want to quickly connect to a cable service provider....
Page 48 - Do one of the following:; Using the Configuration Editor
36 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config 2 Do one of the following: – To change the ANG-1100’s MAC address to reflect your computer ’s MAC address, first find the computer ’s address by issuing the proper command at a DOS prompt. For W...
Page 49 - Click the Configuration Edit menu option.
Aurorean Network Gateway-1100 User’s Guide 37 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config 1 Click the Configuration Edit menu option. The Configuration Edit window appears as shown in Figure 26. Figure 26 Configuration Edit Window 2 Click on the configuration file of your choice. 3 T...
Page 50 - Configuration File Edit Window
38 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Figure 27 Configuration File Edit Window 4 Edit the UNIX configuration file and click Update or Delete. NOTE You can remove the Configuration Editor (along with the Advanced Utilities option) fr...
Page 52 - Configuring the ANG-1100 with Aurorean Web Config; Follow the steps below to configure IP port forwarding.; Usage
40 Aurorean Network Gateway-1100 User’s Guide Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Refer to the tables below for command usage, switches, arguments, and definitions. Follow the steps below to configure IP port forwarding. 1 Login to Web Config. 2 Click on the Config File Edito...
Page 53 - The above sample configuration performs the following tasks:; Example
Aurorean Network Gateway-1100 User’s Guide 41 Chapter 3 Configuring the ANG-1100 with Aurorean Web Config Refer to the table below for a sample IP port forwarding configuration: The above sample configuration performs the following tasks: ! Clears the IP port forwarding table ! Maps telnet (TCP port...
Page 55 - Glossary; RiverMaster computer
Aurorean Network Gateway-1100 User’s Guide 41 A Glossary Glossary Glossary Glossary Aurorean Network Gateway An Enterasys Networks device that creates a secure virtual private circuit over the Internet between itself and a remote user ’s computer. The Aurorean Network Gateway encapsulates data packe...
Page 56 - Appendix A; DHCP
42 Aurorean Network Gateway-1100 User’s Guide Appendix A Glossary authentication server (such as a RADIUS or SecurID server). When the network administrator changes tunnel connection parameters, the Aurorean Policy Server provide updated configuration files to Aurorean Network Gateways on request. D...
Page 57 - is used to encapsulate
Aurorean Network Gateway-1100 User’s Guide 43 Appendix A Glossary Generic Routing Encapsulation (GRE) Tunneling protocol developed by Cisco that can encapsulate a wide variety of protocol packet types inside IP tunnels, creating a virtual point-to-point link over the Internet. For PPTP , GRE is used...
Page 58 - also conserves the number of global IP addresses that
44 Aurorean Network Gateway-1100 User’s Guide Appendix A Glossary LAN Locan Area Network (LAN) connects computers and peripherals together in an office or a campus to allow the computers to access each other and other common peripherals. LEDs Abbreviation of light emitting diode, an electronic devic...
Page 59 - In Internet terms, the physical site that contains an
Aurorean Network Gateway-1100 User’s Guide 45 Appendix A Glossary Point of Presence (POP) In Internet terms, the physical site that contains an ISP’s network equipment. Remote users dial into the POP, authenticate against the ISP’s customer database, and then gain access to the Internet. ISPs typica...
Page 60 - Routers
46 Aurorean Network Gateway-1100 User’s Guide Appendix A Glossary Routers Devices which direct network traffic among LANs or WANs until the data reaches its destination. To do this, routers communicate with one another using dedicated protocols such as IGRP (Interior Gateway Routing Protocol) and BG...
Page 61 - Specifications; This appendix details the specifications of the ANG-1100.; Table 1; Category
Aurorean Network Gateway-1100 User’s Guide 47 B Specifications Specifications Specifications Specifications This appendix details the specifications of the ANG-1100. Table 1 ANG-1100 Specifications Category Parameters Chassis Depth 6” (16 cm) Width 10” (25 cm) Height 1.5” (4 cm) Weight 1 lb. (.5 kg)...
Page 65 - Pin Assignments; Length cannot exceed 328 feet (100 meters)
Aurorean Network Gateway-1100 User’s Guide 51 C Pin Assignments Pin Assignments Pin Assignments Pin Assignments This appendix describes pin assignments for the Ethernet connectors on the ANG-1100. Additionally, the ANG-1105 provides a serial connector. ANG-1100 servers are equipped with either two o...
Page 66 - Appendix C; Ethernet Port Pin Assignments; Pin
52 Aurorean Network Gateway-1100 User’s Guide Appendix C Pin Assignments Figure 1 Ethernet Port Pin Assignments The ANG-1105 is equipped with a single serial port for debugging purposes. An industry-standard serial cable can be used to connect to the male DB-9 connector. See Figure 2 for serial port...
Page 67 - Serial Port Pin Assignments
Aurorean Network Gateway-1100 User’s Guide 53 Appendix C Pin Assignments Figure 2 Serial Port Pin Assignments Pin Signal 1 Carrier Detect (CD) 2 Receive Data (RX) 3 Transmit Data (TX) 4 Data Term Ready (DTR) 5 Ground (GND) 6 No Carrier (NC) 7 Request to Send (RTS) 8 Clear to Send (CTS) 9 No Carrier ...
Page 69 - Enterasys Networks, Inc. Program License
Aurorean Network Gateway-1100 User’s Guide 55 D Program License Agreement & Program License Agreement & Program License Agreement & Program License Agreement & Support Support Support Support This appendix describes the terms and conditions that govern the use of Aurorean Virtual Net...
Page 70 - Appendix D; License
56 Aurorean Network Gateway-1100 User’s Guide License Appendix D Program License Agreement & Support License You have the right to use only the one (1) copy of the Program provided in this package subject to the terms and conditions of this License Agreement. You may not copy, reproduce or trans...
Page 71 - Program License Agreement & Support; United States Government Restricted Rights
Aurorean Network Gateway-1100 User’s Guide 57 Appendix D United States Government Restricted Rights Program License Agreement & Support Estonia, Georgia, Iraq, Kazakhstan, Kyrgyzstan, Laos, Latvia, Libya, Lithuania, Moldova, North Korea, the People’s Republic of China, Romania, Russia, Rwanda, T...
Page 72 - No Liability for Consequential Damages; Support from Enterasys Networks
58 Aurorean Network Gateway-1100 User’s Guide No Liability for Consequential Damages Appendix D Program License Agreement & Support No Liability for Consequential Damages IN NO EVENT SHALL ENTERASYS OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR...
Page 73 - Technical Support; Phone Support; Returning Products for Repair
Aurorean Network Gateway-1100 User’s Guide 59 Appendix D Technical Support Program License Agreement & Support Phone Support Enterasys Networks customer support personnel are available by calling 1-800-872-8440 . When you call, please call from a position where you can operate the RiverMaster ma...
Page 78 - Web Config
64 Aurorean Network Gateway-1100 User’s Guide Index VPN. See Virtual Private Network (VPN) 46 W Web Config 13 winipcfg 25 WINS proxy 25
