Enterasys Networks 7H4385-49 - Manuals

iv ѻ ѻક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ໮⒈㘨㣃 3%% ໮⒈Ѡ㣃䝮 3%'( 䞥ሲ䚼ӊ (Metal Parts) h ƻ ƻ h ƻ ƻ ⬉䏃῵ഫ ( Circuit Modules) h ƻ ƻ h ƻ ƻ ⬉㓚ঞ⬉㓚㒘ӊ ( Cables & Cable Assemblies) h ƻ ƻ h ƻ ƻ ล᭭੠㘮ড়⠽䚼ӊ (Plastic and Polymeric parts...

vi Declaration of Conformity Application   of   Council   Directive(s): 89/336/EEC73/23/EEC Manufacturer’s   Name: Enterasys Networks, Inc. Manufacturer ’s   Address: 50   Minuteman   Road Andover,   MA   01810 USA European   Representative   Address: Enterasys Networks,   Ltd. Nexus   House,   Newb...

vii ENTERASYS NETWORKS, INC. FIRMWARE LICENSE AGREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This   document   is   an   agreement   (“Agreement”)   between   the   end   user   (“You”)   and   Enterasys   Networks,   Inc.,   on   behalf   of   its...

ix 8. AUDIT   RIGHTS. You   hereby   acknowledge   that   the   intellectual   property   rights   associated   with   the   Program   are   of   critical   value   to   Enterasys,   and,   accordingly,   You   hereby   agree   to   maintain   complete   books,   records   and   accounts   showing  ...

xi Contents About This Guide Who Should Use This Guide ............................................................................................................... xvHow to Use This Guide ................................................................................................................

xii Connecting to a Modem ............................................................................................................ 3-22Adapter Wiring and Signal Assignments ................................................................................... 3-24 Completing the Installation .........

xiii Figures 1-1 7H4385-49 DFE-Platinum Module .........................................................................................1-4 3-1 Examples, Module Placement in Matrix E7 Chassis ..............................................................3-4 3-2 Installing Module into Matrix E7 or N7...

DFE-Platinum Series Hardware Installation Guide xv About This Guide This   guide   provides   an   overview,   installation   and   troubleshooting   instructions,   and   specifications   for   the   Enterasys   Matrix™   7H4385 ‐ 49   DFE ‐ Platinum   PoE   module. For   information   about   the ...

How to Use This Guide xvi About This Guide How to Use This Guide This   preface   provides   an   overview   of   this   guide   and   the   DFE ‐ Platinum   Series   manual   set,   a   brief   summary   of   each   chapter,   defines   the   conventions   used   in   this   document,   and   instr...

Conventions Used in This Guide DFE-Platinum Series Hardware Installation Guide xvii Conventions Used in This Guide The   following   conventions   are   used   in   this   guide. Lowercase   x:   Indicates   the   general   use   of   an   alphanumeric   character   (for   example,   6x1xx,   the   ...

Getting Help xviii About This Guide Getting Help For   additional   support   related   to   the   modules   or   this   document,   contact   Enterasys Networks   using   one   of   the   following   methods: Before   contacting   Enterasys Networks   for   technical   support,   have   the   follo...

DFE-Platinum Series Hardware Installation Guide 1-1 1 Introduction This   chapter   provides   an   overview   of   the   DFE ‐ Platinum   module   capabilities,   and   introduces   the   7H4385 ‐ 49   PoE   module. Important Notice Depending on the firmware version used in the DFE module, some fea...

Overview of DFE-Platinum Series Module Capabilities 1-2 Introduction Overview of DFE-Platinum Series Module Capabilities The   Platinum   Distributed   Forwarding   Engine   (DFE)   is   Enterasys Networks’   next   generation   of   enterprise   modules   for   the   Matrix   N ‐ Series   and   Mat...

DFE-Platinum 7H4385-49 PoE Module DFE-Platinum Series Hardware Installation Guide 1-3 DFE-Platinum 7H4385-49 PoE   Module This   section   provides   an   overview   of   the   7H4385 ‐ 49   ( Figure 1 ‐ 1 ).   For   information   about   the   DFE   module   features   and   how   to   configure   ...

Connectivity DFE-Platinum Series Hardware Installation Guide 1-5 Connectivity The   7H4385 ‐ 49   DFE   module   supports   up   to   48,   10BASE ‐ T/100BASE ‐ TX   switched   ports   connected   through   48   fixed   front   panel   connectors,   and   the   bridge   function   between   FTM1   a...

Secure Networks Policy Support 1-6 Introduction Secure Networks Policy Support Policy   Enabled   Networking   manages   the   allocation   of   networking   infrastructure   resources   in   a   secure   and   effective   manner.   Using   Secure   Networks   Policy ,   an   IT   Administrator   ca...

DFE-Platinum Series Hardware Installation Guide 2-1 2 Network Requirements Before   installing   the   module,   review   the   requirements   and   specifications   referred   to   in   this   chapter   concerning   the   following: The   network   installation   must   meet   the   requirements   ...

Module Placement in a Matrix E7 Chassis 2-2 Network Requirements In   normal   usage   (and   typical   implementations)   there   is   no   need   to   enable/disable   ports   for   Link   Aggregation.   The   default   values   will   result   in   the   maximum   number   of   aggregations   pos...

100BASE-TX Network DFE-Platinum Series Hardware Installation Guide 2-3 100BASE-TX Network The   fixed   front   panel   ports   of   the   7H4385 ‐ 49 provide   a   connection   that   supports   Category   5   UTP   cabling.   The   device   at   the   other   end   of   the   twisted   pair   segm...

DFE-Platinum Series Hardware Installation Guide 3-1 3 Installation This   chapter   provides   the   instructions   to   install   the   7H4382 ‐ 49   DFE module.   Follow   the   order   of   the   sections   listed   below   to   correctly   install   the   DFE module. Electrical Hazard: Only qual...

Installation Site Requirement 3-2 Installation Installation Site Requirement The   7H4385 ‐ 49   must   be   installed   in   a   Matrix E7,   N1,   N3,   N5,   or   N7   chassis   located   in   a   Restricted   Access   Location   (RAL).   This   location   should   only   be   accessible   by   p...

Installing Optional Network Expansion Module (NEM) DFE-Platinum Series Hardware Installation Guide 3-3 Installing Optional Network Expansion Module (NEM) Refer   to   your   release   notes   or   the   Enterasys Networks   web   site   for   the   latest   available   network   expansion   module. ...

Backplane Connections and Installation Rules 3-4 Installation These   DFE modules   have   connections   to   both   FTM1   and   FTM2   backplanes,   enabling   them   to   route   frames   between   the   two   backplanes   and   all   modules   in   the   6C107   chassis.   However,   the   older...

Preparing to Install into a Matrix E7, N1, N3, N5, or N7 Chassis DFE-Platinum Series Hardware Installation Guide 3-7 Preparing to Install into a Matrix E7, N1, N3, N5, or N7 Chassis To   install   any   module   into   the   Matrix E7 chassis,   refer   to   “ Backplane   Connections   and   Install...

Preparing to Install into a Matrix E7, N1, N3, N5, or N7 Chassis 3-8 Installation 5. Examine   the   module   for   damage.   If   any   damage   exists,   DO   NOT   install   the   module.   Immediately   contact   Enterasys   Networks.   Refer   to   “ Getting   Help ”    on   page xviii. 6. To  ...

Preparing to Install into a Matrix E7, N1, N3, N5, or N7 Chassis DFE-Platinum Series Hardware Installation Guide 3-9 3. Align   the   module   card   between   the   upper   and   lower   card   guides   of   the   desired   slot   and   slide   it   into   the   chassis,   taking   care   that   th...

Connecting 48 Vdc Power for PoE Operation 3-14 Installation Connecting 48 Vdc Power for PoE Operation The   Matrix N5   (7C105 ‐ P)   chassis   provides   48   Vdc   to   connected   PDs   (powered   devices)   by   way   of   its   backplane   connection   to   a   PoE ‐ compliant   DFE   module   ...

Connecting to the Network DFE-Platinum Series Hardware Installation Guide 3-15 Connecting to the Network This   section   provides   the   procedures   for   connecting   unshielded   twisted   pair   (UTP)   segments   from   the   network   or   other   devices   to   the   7H4385 ‐ 49   (“ Connec...

Connecting to the Network 3-16 Installation Making the UTP Connections To   connect   and   verify   UTP   cable   connections   to   RJ45   ports   (1   through   48),   refer   to   Figure 3 ‐ 4   and   proceed   as   follows: 1. Ensure   that   the   device   connected   to   the   other   end   ...

Connecting to the Network DFE-Platinum Series Hardware Installation Guide 3-17 b. Each   time   the   GROUP   SELECT   button   is   pressed   for   less   that   one   second,   the   GROUP   LED   lights   up   in   sequence,   indicating   which   Group   is   selected.   The   receive   and   tr...

Connecting to the Network DFE-Platinum Series Hardware Installation Guide 3-19 Figure 3-8 Eight-Wire Straight-Through Cable RJ45 Pinouts, Connections Between Switches and End User Devices f. Ensure   that   the   twisted   pair   connection   meets   the   dB   loss   and   cable   specifications   ...

Connecting to COM Port for Local Management 3-20 Installation 3. Press   on   the   GROUP   SELECT   switch   again   for   more   than   one   second.   This   returns   the   7H4385 ‐ 49   to   port   RX   (receive)   and   TX   (transmit)   status   mode. Connecting to COM Port for Local Manageme...

Connecting to COM Port for Local Management DFE-Platinum Series Hardware Installation Guide 3-21 4. Turn   on   the   PC   and   set   the   following   parameters   on   your   VT   emulation   package: 5. When   these   parameters   are   set,   the   Local   Management   password   screen   will ...

Connecting to COM Port for Local Management 3-22 Installation 2. Plug   the   RJ45   connector   at   the   other   end   of   the   UTP   straight ‐ through   cable   into   the   RJ45 ‐ to ‐ DB25   female   adapter. 3. Connect   the   RJ45 ‐ to ‐ DB25   adapter   to   the   port   labeled   COMM  ...

Connecting to COM Port for Local Management DFE-Platinum Series Hardware Installation Guide 3-23 1. Connect   the   RJ45   connector   at   one   end   of   the   UTP   straight ‐ through   cable to   the   COM   port   of   the   module. 2. Plug   the   RJ45   connector   at   the   other   end   o...

Connecting to COM Port for Local Management 3-24 Installation Adapter Wiring and Signal Assignments COM Port Adapter Wiring and Signal Diagram RJ45 DB9 Pin Conductor Pin Signal 1 Blue 2 Receive (RX) 4 Red 3 Transmit (TX) 5 Green 5 Ground (GRD) 2 Orange 7 Request to Send (RTS) 6 Yellow 8 Clear to Sen...

Connecting to COM Port for Local Management DFE-Platinum Series Hardware Installation Guide 3-25 VT Series Port Adapter Wiring and Signal Diagram RJ45 DB25 Pin Conductor Pin Signal 4 Red 2 Transmit (TX) 1 Blue 3 Receive (RX) 6 Yellow 5 Clear to Send (CTS) 5 Green 7 Ground (GRD) 2 Orange 20 Data Term...

Completing the Installation 3-26 Installation Completing the Installation Completing   the   DFE   module   installation   depends   on   if   the   module   is   being   installed   in: • a   new   DFE   module   system   (refer   to   “ Completing   the   Installation   of   a   New   System ”   o...

Completing the Installation DFE-Platinum Series Hardware Installation Guide 3-27 The   DFE module   is   now   ready   to   be   configured.   For   information   about   setting   the   IP   address   and   configuring   Telnet   settings   for   remote   access   to   DFE   management,   refer   t...

Completing the Installation 3-28 Installation Completing the Installation of a DFE Module in an Existing System In   an   established   DFE   module   system, • a   DFE   module   is   already   established   as   the   management   module, • the   passwords   have   already   been   set   for   var...

DFE-Platinum Series Hardware Installation Guide 4-1 4 Troubleshooting This   chapter   provides   information   concerning   the   following: Using LANVIEW The   DFE   module   uses   a   built ‐ in   visual   diagnostic   and   status   monitoring   system   called   LANVIEW.   The   LANVIEW   LEDs...

Using LANVIEW 4-2 Troubleshooting Viewing the Receive and Transmit Activity You   can   view   the   7H4385 ‐ 49   receive   and   transmit   port   activity   on   the   RX   and   TX   LEDs.   However,   only   one   group   of   12   ports   may   be   viewed   at   a   time. To   view   the   re...

Using LANVIEW DFE-Platinum Series Hardware Installation Guide 4-3 3. Press   the   GROUP   SELECT   button   again   for   more   than   one   second.   This   returns   the   7H4385 ‐ 49   to   the   default   status   mode   to   monitor   RX   (receive)   and   TX   (transmit)   activity.   Table...

Using LANVIEW 4-4 Troubleshooting CPU (cont’d) Amber and off Alternating (67% on, 33% off) . Indicates that a shutdown process has completed. This indication will remain for 60 seconds before automatically restarting. While in this state, you have 60 seconds to safely remove the DFE module from the ...

Using LANVIEW DFE-Platinum Series Hardware Installation Guide 4-5 RX/TX LED Indications in PoE Port Status Mode RX/TX Green/Off There is a connection to a PD. There is 48 Vdc at the RJ45 connector. None. Off/Red Port is off due to overload. The attached device exceeded maximum load according to 802....

Troubleshooting Checklist 4-6 Troubleshooting Troubleshooting Checklist If   the   module   is   not   working   properly,   refer   to   Table 4 ‐ 2   on   page 4 ‐ 6   for   a   checklist   of   problems,   possible   causes,   and   recommended   actions   to   resolve   the   problem. Table 4-2 ...

Troubleshooting Checklist DFE-Platinum Series Hardware Installation Guide 4-7 Cannot contact the module through in-band management. IP address not assigned. Refer to the Enterasys Matrix DFE-Platinum Series Configuration Guide for the IP address assignment procedure. Port is disabled. Enable port. R...

Overview of DFE Module Shutdown Procedure 4-8 Troubleshooting Overview of DFE Module Shutdown Procedure The   DFE   modules   installed   in   a   Matrix E7,   Matrix   N3,   Matrix   N5,   or   Matrix   N7   chassis   are   interdependent   and   operate   under   a   single   IP   address   as   a...

Overview of DFE Module Shutdown Procedure DFE-Platinum Series Hardware Installation Guide 4-9 Figure 4-2 OFFLINE/RESET Switch Recommended Shutdown Procedure Using OFFLINE/RESET Switch Before   pulling   a   DFE   module   out   of   a   chassis,   press   or   tap   on   its   OFFLINE/RESET   switch...

Overview of DFE Module Shutdown Procedure 4-10 Troubleshooting Last Resort Shutdown Procedure Using OFFLINE/RESET Switch To   reset   a   DFE   module   without   it   performing   an   orderly   shutdown   routine,   press   and   hold   the OFFLINE/RESET   switch   for   approximately   6   second...

‡FE-Platinum Series Hardware Installation Guide A-1 A Specifications This   appendix   provides   information   about   the   following: Enterasys   Networks   reserves   the   right   to   change   the   specifications   at   any   time   without   notice. DFE Module Specifications Table A ‐ 1   pr...

COM Port Pinout Assignments A-2 Specifications COM Port Pinout Assignments The   COM   port   is   a   serial   communications   port   for   local   access   to   Local   Management.   Refer   to   Table A ‐ 2   for   the   COM   port   pin   assignments. Physical Dimensions 46.43 H x 6.05 W x 29.5...

Regulatory Compliance ‡FE-Platinum Series Hardware Installation Guide A-3 Regulatory Compliance The   7H4385 ‐ 49   meets   the   safety   and   electromagnetic   compatibility   (EMC)   requirements   listed   in   Table A ‐ 3 : Table A-3 Compliance Standards Regulatory Compliance Standards Safety ...

DFE-Platinum Series Hardware Installation Guide B-1 B Mode Switch Settings and Option Installations This   appendix   covers   the   following   items: Required Tools Use   the   following   tools   to   perform   the   procedures   provided   in   this   appendix: • Antistatic   wrist   strap • Phi...

Setting the Mode Switches B-2 Mode Switch Settings and Option Installations Setting the Mode Switches Figure B ‐ 1   shows   the   location   of   the   mode   switches   and   the   switch   settings   for   normal   operation.   These   switches   are   set   at   the   factory   and   rarely   ne...

Memory Locations and Replacement Procedures DFE-Platinum Series Hardware Installation Guide B-3 Figure B-1 Mode Switch Location (7H4385-49 shown without safety cover) Memory Locations and Replacement Procedures If   the   Dual   In ‐ line   Memory   Module   (DIMM)   or   DRAM   Single   In ‐ line  ...

Gaining Access to Memory Modules B-4 Mode Switch Settings and Option Installations Figure B-2 DIMM and DRAM SIMM Locations (7H4385-49 shown without safety cover) Gaining Access to Memory Modules Before   you   can   replace   the   DRAM   SIMM,   you   must   gain   access   to   it   by   removing ...

Gaining Access to Memory Modules DFE-Platinum Series Hardware Installation Guide B-5 Removing the Safety Cover Refer   to   Figure B ‐ 3   and   proceed   as   follows: 1. Attach   the   antistatic   wrist   strap   (refer   to   the   instructions   on   the   antistatic   wrist   strap   package)....

Gaining Access to Memory Modules B-6 Mode Switch Settings and Option Installations Figure B-3 Removing the Safety Cover 1 Safety cover 3 Standoffs (7) 2 Cover screws (7) 4 Standoff/spacer screwed to standoff under the NEM 1 2 3 4 5 6 1 2 3 4 5 6 7G-6MGBIC-A 1X G R O U P 1 G R O U P 2 11X 13X 23X OFF...

Gaining Access to Memory Modules DFE-Platinum Series Hardware Installation Guide B-7 DRAM SIMM Replacement Procedure After   you   have   removed   the   safety   cover   as   described   in   “ Removing   the   Safety   Cover ”   on   page B ‐ 5,   proceed   to   “ Removing   the   Optional   Netwo...

Gaining Access to Memory Modules B-8 Mode Switch Settings and Option Installations 2. Remove   the   two   screws   fastening   the   NEM   to   the   DFE module   front   panel   and   remove   the   standoff   fastening   the   NEM   to   the   main   board.   Save   the   two   screws   and   sta...

Gaining Access to Memory Modules DFE-Platinum Series Hardware Installation Guide B-9 Installing the DRAM SIMM To   install   the   DRAM   SIMM,   refer   to   Figure B ‐ 6   and   proceed   as   follows: 1. With   the   connector   arms   set   in   the   open   position,   insert   the   DRAM   SIM...

Gaining Access to Memory Modules B-10 Mode Switch Settings and Option Installations DIMM Replacement Procedure In   the   event   that   the   Dual   In ‐ line   Memory   Module   (DIMM)   needs   to   be   replaced,   the   following   sections   explain   how   to   remove   and   install   the   ...

Gaining Access to Memory Modules DFE-Platinum Series Hardware Installation Guide B-11 Installing the DIMM To   install   a   DIMM,   refer   to   Figure B ‐ 8   and   proceed   as   follows: 1. Insert   the   DIMM   down   between   the   connector   fingers. 2. Pivot   the   DIMM   downward   so   ...

Gaining Access to Memory Modules B-12 Mode Switch Settings and Option Installations Figure B-9 Installing the Network Expansion Module 3. Use   two   of   the   saved   coverplate   screws   to   fasten   the   NEM   to   the   DFE module   front   panel,   but   do   not   tighten   screws   at   t...

Gaining Access to Memory Modules DFE-Platinum Series Hardware Installation Guide B-13 Reinstalling the Safety Cover To   install   the   safety   cover,   refer   to   Figure B ‐ 10   and   proceed   as   follows: 1. Locate   the   seven   screws   saved   in   the   procedure   “ Removing   the   S...

Gaining Access to Memory Modules B-14 Mode Switch Settings and Option Installations Figure B-10 Installing the Safety Cover 1 Safety cover 2 Screws (7) 3 Standoff (7) 1 2 3 4 5 6 1 2 3 4 5 6 7G-6MGBIC-A 1X G R O U P 1 G R O U P 2 11X 13X 23X OFFLINE/ RESET COM CPU M G M T GR OUP SELECT GR OUP 1 2 3 ...

DFE-Platinum Series Hardware Installation Guide C-1 C About PoE (Power over Ethernet) This   appendix   provides   an   overview   of   Power   over   Ethernet   Technology   and   how   it   is   implemented   in   relation   to   the   7H4385 ‐ 49. Overview Power   over   Ethernet   (PoE)   refers...

Overview C-2 About PoE (Power over Ethernet) Proprietary PD Detection The   7H4385 ‐ 49   supports   a   subset   of   the   currently   deployed   proprietary   PoE   methods.   This   includes   support   for   Cisco   PDs,   including   a   proprietary   capacitor   based   detection   scheme.   ...

Overview DFE-Platinum Series Hardware Installation Guide C-3 PoE Port Status LEDs The   PoE   port   status   of   each   10/100   Mbps   front ‐ panel   port   is   indicated   by   the   two ‐ color   RX   and   TX   LED   display   for   each   port.   To   observe   the   PoE   port   status   i...

Index-1 Index Numerics 100BASE-TX connection 3-15 requirements 2-3 10BASE-T connection 3-15 requirements 2-2 7H4385-49 introduction to 1-3 , 1-4 specifications for A-1 C Cable connections 7H4382-49 3-15 UTP 3-15 Cable specifications 100BASE-TX network 2-3 10BASE-T network 2-2 CLI command introductio...