Elo ET5501L - Manuals

User Manual: Interactive Digital Signage SW601990 Rev E, Page 6 of 36 Chapter 3: IDS Touchmonitor Installation Connector Panel & Interfaces Note: For your health and safety, it is strongly recommended that at least two people (four for the ET7001L) handle, lift, or move these Touchmonitors. Elo ...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 7 of 36 IDS Touchmonitor Connections to an External Computer 1. Connect the HDMI cable between the monitor and the video source. 2. Connect the USB touch cable between the monitor and the PC. 3. Select the correct power cable for your reg...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 8 of 36 Installing the IDS Touchscreen Technology Software Drivers IntelliTouch Plus units are HID compatible, but will require the Elo driver if touch calibration is required. Optical units are HID compatible and do not require an Elo to...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 11 of 36 Rear VESA Mount For the 32” and 42” models: A four-hole, 400x400mm mounting pattern is provided on the rear of the monitor. The VESA FDMI-compliant mounting is coded: VESA MOUNT PER MIS-F, 400,400,6MM For the 55” models: A four-h...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 13 of 36 Chapter 5: Operation Power To turn the touchmonitor on or off, press the touchmonitor power button once. If a computer module is installed, then the computer module will also turn on with the monitor. To abruptly power off the co...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 14 of 36 IntelliTouch Touchscreen Technology The IntelliTouch and IntelliTouch Plus touchscreens can be re-calibrated to your displayed video image, if needed, through the calibration function in the Elo driver control panel. IntelliTouch...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 20 of 36 OSD and Power Lockouts Press and hold the “Menu” and “>” buttons for two seconds to enable/disable the OSD Locking feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or Select keys will have no effec...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 21 of 36 The location of the RFID antenna is indicated by the arrow in the following location. RFID tags can be read at a distance of up to 40 mm away from the bezel. For best results, touch the tag directly to the bezel area containing t...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 22 of 36 For Mac OS X and Ubuntu version 11 or higher, these drivers are automatically installed when the system is connected to monitor. To find information on the drivers, do the following: NOTE: The Elo Touch Solutions Touchmonitor ID ...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 25 of 36 Example of Thermal Protection Mode for an ET4201L Monitor with 100% Brightness: At Step 1: OSD = 60, Brightness = 80% Normal operation returns if OSD can maintain 55°C or lower temperature for five minutes. At Step 2: OSD = 65, B...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 27 of 36 ET5501/7001L Brightne ss vs. Ambie nt Light 0 20 40 60 80 100 120 0 50 70 90 150 200 250 275 300 350 400 410 420 430 460 480 500 Am bie nt Light B ri g h tn ess Note: If the Thermal Protection Mode is activated, the Intelligent B...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 28 of 36 Chapter 6: Technical Support If you are experiencing trouble with your touchmonitor, refer to the following suggestions. If the problem persists, please contact your local dealer or contact Elo Touch Solutions Customer Service. S...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 29 of 36 Chapter 7: Safety & Maintenance Safety To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor or Computer Module. They are not user-serviceable. Do not block or insert anything insi...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 30 of 36 Care and Handling The following tips will help maintain optimal performance of your touchmonitor:  Disconnect the AC power cable before cleaning.  To clean the display, use a cloth lightly dampened with a mild detergent.  It i...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 31 of 36 Chapter 8: Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power so...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 33 of 36 may also present a lethal shock hazard to the user.) If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician. III. Agency Certifications The following certifications and ma...

User Manual: Interactive Digital Signage SW601990 Rev E, Page 35 of 36 Chapter 9: Warranty Information Visit http://www.elotouch.com/Support/warranty.asp

User Manual: Interactive Digital Signage SW601990 Rev E, Page 36 of 36 Check out our website www.elotouch.com Get the latest...  Product Information  Specifications  Upcoming events  Press releases  Software drivers Getting in Touch with Us To find out more about the extensive range of Elo touc...