Elo 1566L - Manuals

2-3 C H A P T E R 2 C HAPTER 2 I NSTALLATION AND S ETUP This chapter discusses how to install your LCD panel mount touchmonitor and how to install Elo TouchSystems driver software.

2-5 Product Overview Main Unit Rear View LCD Display

2-6 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Bottom View Remote OSD with Cable Attachment Customer Panel AUTO/SEL DOWN UP MENU

2-7 Mounting Your Touchmonitor N OTE : You will need a 6mm allen socket and torque wrench (Hex) to attach the mounting brackets. Your panel mount touchmonitor comes with 6 mounting brackets (and 6 screws). You will need 6 brackets to mount your touchmonitor. Two brackets attach to the top and bottom...

2-8 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connecting Your Touchmonitor The following illustrations guide you step by step in connecting your touchmonitor. Before connecting the cables to your touchmonitor and PC, be sure that the computer and the touchmonitor are turned o...

2-9 STEP 1-Connecting the Video Cable • Connect the 15-pin video cable (the ferrite bead end) to the video port on your PC. • Connect the other end of the video cable to the video connector on your touchmonitor. • Secure the cable to your touchmonitor and PC by turning the screws on the connector cl...

2-10 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e STEP 2-Connecting the Serial Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC. • Connect the male end of the cable to the serial touchscreen connector on your touch...

2-11 STEP 3-Connecting the Power Cable Depending on where you live, you will use either the European or US/Canadian power cable. • Connect the female end of the power cable to the Brick power supply. • Connect the Brick power supply into the power port on the touchmonitor. To protect your equipment ...

2-12 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. The enclosed CD-ROM contains drivers for the following operating systems: • Windows 2000 • Windows...

2-13 Installing the Serial Touch Driver To install your driver software, follow the instructions in the appropriate following section. Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0 N OTE : For Windows 2000 and NT 4.0 you must have administrator access rights to install th...

3-15 C H A P T E R 3 C HAPTER 3 O PERATION About Touchmonitor Adjustments Variations in video output and application will likely require you to adjust your touchmonitor to optimize the quality of the display. For best performance, your monitor should be operating in native resolution; that is, 1024 ...

3-16 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Connecting the OSD Module All adjustments are made by using the remote on-screen display (OSD) module. First, connect the OSD module by inserting the corded end into the OSD module connector in the back of the monitor. Connection...

3-17 OSD Module Controls Control Function Auto/Select Auto- To activate the “Auto Adjustment” function to obtain an optimum image. Select- To select the adjustment items from the OSD menus. Down 1. Decreases the brightness of the display image. 2. Decreases value of the adjustment items. Up 1. Incre...

3-18 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Using the OSD Menus All menu items can be selected by using the buttons on the remote OSD. N OTE : OSD menu default is enabled. Press the UP and DOWN buttons at the same time andhold them down for several seconds to enable/disabl...

3-19 First OSD Menu To access the first OSD menu: 1 Press the Menu button to display the menu and to select between the two Main Menus. 2 Choose the adjustment items by pressing the Auto/Sel button. 3 Adjust the value of the adjustment items by pressing the Up or Down button. The OSD menus have a pr...

3-20 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Horizontal Position The horizontal position function allows you to adjust the horizontal image position. To adjust the horizontal position: 1 Highlight the Horizontal Position option by pressing the Auto/Sel button. The Horizonta...

3-21 Tracking The tracking function synchronizes the signal timing of the display to that of the graphic card. If you experience an unstable flickering image, use this function to make an adjustment. To adjust the tracking: 1 Highlight the Tracking option by pressing the Auto/Sel button. 2 By using ...

3-22 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Display Mode The display mode shows the display resolution, horizontal scan frequency, vertical scan frequency and vertical refresh of the current mode. To adjust the Display Mode: 1 Highlight the Display Mode option then press t...

4-23 C H A P T E R 4 C HAPTER 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your reseller or our technical support at 1-800-557-1458. Solutions to Common Problems Problem Suggestion(s) No image appears...

A-25 A P P E N D I X A C HAPTER 4 N ATIVE R ESOLUTION The native resolution of a monitor is the resolution at which the LCD panel is designed to perform best. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but no...

B-27 A P P E N D I X B C HAPTER 4 T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your industrial touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and...

B-28 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cab...

C-29 A P P E N D I X C C HAPTER 4 T ECHNICAL S PECIFICATIONS Compatibility Modes Your Elo Entuitive touchmonitor is compatible with the following standard video modes. All specifications are typical and subject to change. Mode Resolution H. Frequency (kHz) V. Frequency (Hz) IBM & VESA VGA 640 x ...

C-30 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Touchmonitor Specifications 15" LCD Touchmonitor (ET1566L) Specifications Display Type Active matrix, thin film transistor (TFT), liquid crystal display Size 15-inch diagonal 304.1 x 228.1 mm useful screen area Pixel Format 1...

C-31 AccuTouch Touchscreen Specifications Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,000 touchpoints/in 2 (15,500 touchpoints/cm 2 ). Touch Activation Force Typically less than 4 ounces (113 ...

C-32 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e CarrollTouch Specifications (1) Typical accuracy demonstrated by product using a stylus greater than minimum specified diameter. See note (4). (2) Minimum accuracy demonstrated by product using a stylus greater than minimum speci...

C-36 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Panel Cutout Maximum panel thickness 13mm (0.5") 398.2 ± 1 mm(15.68) ± .04 inches 307 ± 1 mm(12.08) ± .04 inches

37 C HAPTER 4 R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and currentrequirements indicated on the manufacturer’s label. Connection to a differentpower source than those specified herein will likely result in improper o...

41 C HAPTER 4 W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product are: 3 years monitor, 5 years ...

I n d e x - 4 3 Numerics 15” LCD Panel Mount Touchmonitor (ET1566L-7SWA-1) Dimensions, 34 15” LCD Touchmonitor (ET1566) Specifications, 30 A About the Product, 1About Touchmonitor Adjustments, 15AccuTouch Touchmonitor Specifications, 31Auto Adjustment, 18 B Bottom View, 6 C Care and Handling of Your...