Page 2 - EN
EN 2 2 Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ......................................................................................................................3 CHARACTERISTICS ......................................................................................................
Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extrac- tor hood is 650 mm. • Check that the mains voltage corresponds to tha...
Page 4 - CHARACTERISTICS
EN 4 4 CHARACTERISTICS 0÷152 280 598 - 898 175 ø 120 Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 8 1 Directional Air Outlet grille 20 1 Closing element Ref. Q.ty Installation Components 12a 4 Screws 4,2 x 44,4 12e 2 Screws 2,9 x 9,5 Q.ty Doc...
Page 5 - Drilling the Support surface and Fitting the Hood; SCREW FITTING; CLOSING ELEMENT
EN 5 5 INSTALLATION Drilling the Support surface and Fitting the Hood SCREW FITTING • The hood support surface must be 135 mm above the bottom surface of the wall units. • Drill the support with a ø 4,5 mm drill bit, using the drilling template provided. • Cut a hole ø 125 mm in size on the support ...
Page 6 - Connections; DUCTED VERSION AIR EXHAUST SYSTEM
EN 6 6 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø120 mm, the choice of which is left to the installer. • Fix the pipe in position using sufficient pipe clamps (not supplied). • Remove any a...
Page 7 - USE; Control panel; Light; Speed; Speed
EN 7 7 USE Control panel L Light Switches the lighting system on and off. M Motor Switches the extractor motor on and off. V Speed Sets the operating speed of the extractor: 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour. 2. Medium speed, suitable f...
Page 8 - MAINTENANCE; Grease filters; CLEANING METAL CASSETTE GREASE FILTERS; Lighting; LIGHT REPLACEMENT
EN 8 8 MAINTENANCE Grease filters CLEANING METAL CASSETTE GREASE FILTERS • The filters must be cleaned every 2 months, or more frequently in case of particularly heavy use of the hood. Filters can be washed in a dishwasher. • Pull out the sliding suction panel. • Remove the filters one by one, after...