Eizo S2410W - Manuals - manualsarea.com

Page 3 - SAFETY SYMBOLS; WARNING; Indicates a prohibited action.

SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may resu...

Page 5 - PRECAUTIONS; Do not open the cabinet or modify the unit.

PRECAUTIONS IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper mainte...

Page 6 - Not doing so may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately....

Page 7 - To disconnect the power cord, grasp the plug firmly and pull.; Tugging on the cord may damage and result in fire or electric shock.; The equipment must be connected to a grounded main outlet.; Not doing so may cause in fire or electric shock.; Use the correct voltage.; Do not place the cord underneath the unit or other heavy objects.

Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and resul...

Page 8 - Never touch the plug and power cord if it begins to thunder.; Touching them may result in electric shock.; Do not touch a damaged LCD panel directly with bare hands.; The backlight of the LCD panel contains mercury.; Handle with care when carrying the unit.; Dropping the unit may result in injury or equipment damage.

Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to come unattached, which m...

Page 9 - Do not block the ventilation slots on the cabinet.; Do not place any objects on the ventilation slots.; Do not touch the plug with wet hands.; Doing so may result in electrical shock.; Use an easily accessible power outlet.; LCD Panel

Do not block the ventilation slots on the cabinet. ● Do not place any objects on the ventilation slots. ● Do not install the unit in a closed space. ● Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equip...

Page 12 - Front; Monitor Adjustment menu; Rear

1-3. Controls & Connectors Front (1) ScreenManager® Monitor Adjustment menu (2) FineContrast Menu Directly touching the left or right button allows you to select a FineContrast mode. (3) Input Signal Selection Switch (SIGNAL) Switch the input signals when connecting 2 PCs. (4) Auto Adjustment Sw...

Page 14 - Resolution; Analog Input; Digital Input; Resolution Frequency Dot Clock

2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings ( Resolution and frequency) in accordance with the charts below. ● When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plu...

Page 15 - Signal Cable

162 MHz (Max) 720×400 70Hz VGA TEXT 800×600 60Hz VESA 1024×768 60Hz VESA 1280×960 60Hz VESA 1280×1024 60Hz VESA 1600×1200 60Hz VESA 1680×1050 60Hz VESA CVT, VESA CVT RB (Reduced Blanking) 1920×1200 60Hz VESA CVT RB (Reduced Blanking) 2-2. Connecting the Signal Cable ● Be sure that the power switches...

Page 16 - Digital Graphics card; Plug the other end of the power cord into a power outlet.; Not doing so may result in fire or electric shock.

Signal Cable (FD-C16 enclosed) Video OutputConnector / D-Sub mini 15 pinInput Connector(monitor) / D-Sub mini15 pin ● Standard graphics card ● Power Macintosh G3 (Blue & White) / Power Mac G4 (VGA) Signal Cable (FD-C16 enclosed) + Macintosh Adapter (Optional) Video OutputConnector / D-Sub 15pinI...

Page 18 - Whenever finished, turn off the PC and the monitor.

(3) If necessary, fine adjust the height of the monitor. 6. Turn on the monitor's Power switch and then turn on the PC's power. The monitor's power indicator will light up (blue).If an image does not appear, refer to the "7. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and...

Page 19 - Connecting Examples; SIGNAL 1; DVI; Selecting the Active Input; The Priority Input Signal

2-3. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connecting Examples SIGNAL 1 SIGNAL 2 (Ex.1) Analog D-Submini 15pin Signal Cable(FD-C16 enclosed) Signal Cable(FD-C39 enclosed) DVI Digital...

Page 20 - When the power of the monitor is turned ON.

This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the "Input Priority" setting (see table below). Once a priority is set, whenever a change o...

Page 22 - -2. ScreenManager Adjustments and Settings; Main menu; Priority Input Signal

FineContrast Menu Directly touching the left or right switch allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, Movie, Picture, Text and sRGB. To exit the menu, touch the Enter switch. 3-2. ScreenManager Adjustments and Settings The following table shows ...

Page 23 - Power Indicator; To select the Mode; Exit

Menu Settings Menu Off Timer Set the menu displaying time. Translucent Set the transparency of the background. Power Indicator Make non-light for blue lighting when the screen is displayed. ( Power Indicator Setting.) Reset Return to the factory Default settings. Information Information Review the S...

Page 24 - Color Adjustment of the Mode Settings; Detailed Adjustments; Adjustment Lock; Brightness adjustment by the Directing Switch; Off Timer

Custom To adjust the color settings according to your preference Movie Animated images Picture Photo or picture image Text Text on word processor or spreadsheet software sRGB To display the screen images based on those original colors (ex. over the Internet) Color Adjustment of the Mode Settings <...

Page 25 - Power Indicator Setting

[Procedure] 1. Select <Off Timer> in the ScreenManager <Others> menu. 2. Select "Enable" and touch the Right and Left switches to adjust the "On Period" (1 to 23 hours). [Off Timer System] PC Monitor Power Indicator On Period (1H - 23H) Operation Blue Last 15 min. in "...

Page 26 - Adjustment Procedure; Touch the Auto Adjustment Switch on the control panel.; Adjustment

4. ADJUSTMENT 4-1. Screen Adjustment ● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing s...

Page 27 - pattern to that as shown in the diagram on the following.; Clock

pattern to that as shown in the diagram on the following. 3. Adjust by using <Screen> menu in the ScreenManager. (1) Vertical bars appear on the screen → Use the < Clock > adjustment. Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Directing sw...

Page 28 - (4) Screen image is smaller or larger than the actual screen images.; Range Adjustment

pixels are fixed. The <Position> adjustment moves the image to the correct position. Select <Position> and adjust the position by using the Up, Down, Right and Left switches. If vertical bars of distortion appear after finishing the <Position> adjustment, return to <Clock> ad...

Page 29 - Enlarge the screen size when displaying a low resolution.; Menu; Full; Smooth the blurred texts of the enlarged screen.

4-2. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1. Enlarge the screen size when displaying a low resolution. → Select the <Screen Size>. Selec...

Page 31 - Temperature

● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments.) ● Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default sett...

Page 32 - This monitor complies with the; PC

● Using <Hue> adjustment may not obtain proper tone reproduction. Gain To change each color(red, green and blue) 0 ~ 100%By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. ● The val...

Page 34 - Required system environment; Using the USB Rev. 2.0 compatible PC or peripherals is recommended.; Connecting to the USB HUB

5. MAKING USE OF USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment ● PC equipped with...

Page 36 - Setup Procedure; Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)

6. ATTACHING AN ARM The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. ● If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. ❍ Hole spacing on the arm mounting: 100 mm x...

Page 38 - Input Signal Selection switch

7. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. ● No picture problems → See No.1 ~ No.2 ● Imaging problems → See No.3 ~ No.14 ● Other problems → See No.15 ~ No.19 ● USB problems → See No.20 ~ No.21 Problems Points to check with Possible So...

Page 39 - value from; Distortion appears like the figure below.

3. Display position is incorrect. ● Adjust the image position using the < Position > . ● If the problem persists, use the graphics board's utility software to change the display position if available. 4. Screen image is smaller or larger than the actual screen images. ● Adjust the resolution u...

Page 40 - The FineContrast mode does not operate.; The adjustment lock is probably on.

12. The screen has defective pixels (e.g. slightly light or dark). ● This is due to the characteristics of the panel itself, and not the LCD product. 13. Fingerprints remain on the screen. ● Leaving the screen white may solve the problem. 14. The noise appears on the screen. ● Change the mode in <...

Page 45 - Dimensions

4 short beeps Monitor not connected correctly.PC turned off.Monitor received unsupported signal frequency. 2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer.The power will be off within fifteen minutes. Dimensions Pin Assignment DVI-I Connector

Page 46 - USB Port; Signal

Pin No. Signal Signal Pin No. Signal 1 TMDS Data2- 11 TMDS Data1/3 Shield 21 NC 2 TMDS Data2+ 12 NC 22 TMDS Clock shield 3 TMDS Data2/4 Shield 13 NC 23 TMDS Clock+ 4 NC* 14 +5V Power 24 TMDS Clock- 5 NC 15 Ground (return for +5V, Hsync and Vsync) C1 Analog Red 6 DDC Clock (SCL) 16 Hot Plug Detect C2...

Page 52 - TCO Development

[Applicable to black cabinet version only.] Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the furthe...

Page 53 - Environmental Requirements

Fax: +46 8 782 92 07 Email (Internet): [email protected] Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tcodevelopment.com/ Environmental Requirements Flame retardants Flame retardants are present in printed c...

Page 56 - Hinweis zur Ergonomie :; Der Standfuß muß den nachfolgenden Anforderungen entsprechen:

Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ISO13406-2 mit dem Videosignal, 1920 Punkte ≥ 1200 Zeilen, RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau...