Page 2 - Copyright© 2011 EIZO NANAO CORPORATION All rights reserved.
2 Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region of purchase. Copyright© 2011 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form ...
Page 3 - Notice for this monitor
3 Notice for this monitor This product is suited to display medical images of such modalities as MRI, CT, PET, and operating room (RX430-FC only). It does not support the display of mammography images for diagnosis. This product has been adjusted specifically for use in the region to which it was ...
Page 4 - Cleaning; Panel; To use the monitor comfortably; to the environmental conditions.
4 Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or panel. Note • Optional ScreenCleaner is recommended for cleaning the panel surface. (“ScreenCleaner” is supplied with RX430- FC.) ● Panel • Clea...
Page 5 - CONTENTS
5 CONTENTS CONTENTS Cover ...................................................................... 1 Notice for this monitor ............................................ 3 CONTENTS ............................................................. 5Chapter 1 Introduction ......................................
Page 7 - Chapter 1 Introduction
7 Chapter1Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 29.8 inches• Applicable to the resolution of 4M pixels (2560 × 1600 dots)• Uses high-contrast panel (1100:1). Enables the display of sharp images. • Applicable to DisplayPort (...
Page 8 - Disk contents and software overview; Item; To use RadiCS LE/ScreenManager Pro for Medical
8 Chapter1Introduction 1-2. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and ...
Page 9 - Basic Adjustment menu operations; Displaying Adjustment Menu; Exiting; a few times. The Adjustment menu finishes.
9 Chapter1Introduction 1-3. Basic Operations and Functions ● Basic Adjustment menu operations 1. Displaying Adjustment Menu 1. Press . The Adjustment menu appears. Currentmode Menutitle Settings Menu Setting 2. Adjusting/Setting 1. Choose a menu to adjust/set with , , and then press . 2. Choose ...
Page 10 - Functions; Main menu
10 Chapter1Introduction ● Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main menu Setting Reference Color Brightness “2-2.AdjustingColor”(page12) ContrastTemperatureGammaAdvanced Settings HueSaturationGain HybridAreaDetectionTypeHighlightAreaCo...
Page 11 - Chapter 2 Adjusting Screens; resolution for “Screen resolution” under “Display”.
11 Chapter2AdjustingScreens Chapter 2 Adjusting Screens 2-1. Setting the Resolution ● Display resolution For details on compatible resolutions, refer to “Compatible Resolutions” in the Setup Manual. ● Setting resolution When you connect the monitor to the PC and find that the resolution is improp...
Page 12 - To select the display mode (CAL Switch mode); Display Modes; Procedure; The mode among the list is highlighted in turn each time; To perform advanced adjustments
12 Chapter2AdjustingScreens 2-2. Adjusting Color ● To select the display mode (CAL Switch mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose 1-DICOM AvailabletodisplayinDICOMmode. 2-Custom Selectoneoftheseusermodesto...
Page 13 - Adjustable settings in each mode; Icon
13 Chapter2AdjustingScreens ● Adjustable settings in each mode The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)√: Adjustable -: Not adjustable Icon Function CAL Switch mode 1-DICOM * 2-Custom * 3-CAL1 * 4-CAL2 * 5-CAL3 * 6-Hybrid-γ 7-sRG...
Page 14 - To adjust color temperature ; Adjustable range
14 Chapter2AdjustingScreens ● To adjust contrast <Contrast> The luminance of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100% Procedure 1. Choose <Color> from the Adjustment menu, and press . 2. Choose <Contrast> from <Color>, and press ...
Page 15 - This function allows you to adjust the hue.; To adjust the color saturation ; This function allows you to adjust color saturation.
15 Chapter2AdjustingScreens ● To adjust gamma <Gamma> Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monito...
Page 16 - To set the mode in the monochrome display area ; “To select the display mode (CAL
16 Chapter2AdjustingScreens ● To adjust gain <Gain> The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain. Adjustable range 0 to 100% Procedure 1. Choose <Color> from the Adjustment menu, and press . 2. Choose...
Page 18 - Setting
18 Chapter2AdjustingScreens 2-3. Screen Size Selection ● To change screen size <Screen Size> The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the <Screen Size> function from <Scree...
Page 19 - Chapter 3 Setting Monitor; Use or to select the mode to change, and press; Selectable languages; Changing Adjustment Menu Display Position
19 Chapter3SettingMonitor Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection <Mode Preset> Allows you to select the specified modes only.Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure 1. Choose <Tools>...
Page 20 - down, press for at least two seconds to turn on the monitor.; Settings; down, press for at least two seconds to turn on the monitor.
20 Chapter3SettingMonitor 3-4. Setting the EIZO Logo Display <Logo> This function allows you to display, or not, the EIZO logo. Procedure 1. Press to turn off the monitor.2. Holding down, press for at least two seconds to turn on the monitor. The Optional Settings menu appears. 3. Choose &l...
Page 21 - This function allows you to enable/disable the DC5V output.; Select ”On” or “Off ” with or , and press; Select “Dual Link” or “Single Link” with or, and press
21 Chapter3SettingMonitor 3-7. Enabling/Disabling DC5V output This function allows you to enable/disable the DC5V output. Procedure 1. Press to turn off the monitor.2. Holding down, press for at least two seconds to turn on the monitor. The Optional Settings menu appears. 3. Choose <DC5V Outpu...
Page 22 - To reset the color adjustment value ; To reset all adjustments to the default settings
22 Chapter3SettingMonitor 3-9. Return To Default Setting There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and All Reset for resetting all settings to the defaults. Attention • After resetting, you cannot undo the operation. Note • Regard...
Page 23 - Chapter 4 Controlling Monitor Quality; Executing SelfCalibration; Viewing SelfCalibration result
23 Chapter4ControllingMonitorQuality Chapter 4 Controlling Monitor Quality This product has the built-in Integrated Front Sensor, which allows the user to perform periodic calibration and Grayscale Check for the monitor independently. Note • To perform advanced quality control that conforms to m...
Page 24 - Executing Grayscale Check; Viewing Grayscale Check result
24 Chapter4ControllingMonitorQuality 4-2. Checking Grayscale <Grayscale Check> This function allows you to execute Grayscale Check and view the latest result. In addition, when the schedule is set using RadiCS, the next grayscale check schedule appears. ● Executing Grayscale Check Procedur...
Page 25 - Chapter 5 Power Saving Functions; Select “Off ” and either “High” or “Low” with or .; At DVI signal input; This monitor complies with the “DVI DMPM” standard.; At DisplayPort signal input
25 Chapter5PowerSavingFunctions Chapter 5 Power Saving Functions 5-1. Setting Power Saving <Power Save> This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not...
Page 26 - -3. Setting the power saving mode when a person
26 Chapter5PowerSavingFunctions 5-3. Setting the power saving mode when a person leaves the monitor <Presence Sensor> The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1” to “Level-4” of the Presence Sensor function. When a person m...
Page 27 - Chapter 6 Troubleshooting; No picture; Problem
27 Chapter6Troubleshooting Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No picture Problem Possible cause and remedy 1. No picture • Powerindicatordoesnotlight. • Checkwhetherthepowercordisconnectedproperly.• T...
Page 28 - Imaging problems
28 Chapter6Troubleshooting Problem Possible cause and remedy • Themessageshowsthattheinputsignalisout ofthespecifiedfrequencyrange.(Suchsignalfrequencyisdisplayedinmagenta.)Example: fD: DotclockfH: HorizontalscanfrequencyfV: Verticalscanfrequency • Checkwhetherthe...
Page 29 - Other problems; Error Code table; Error Code
29 Chapter6Troubleshooting Other problems Problem Possible cause and remedy 8. The adjustment menu does not appear. • Checkwhethertheoperationlockfunctionworks(see “3-5.LockingButtons<KeyLock>”(page20) ). 9. No mode menu is displayed. • Checkwhethertheoperationlockfuncti...
Page 31 - Chapter 7 Reference
31 Chapter7Reference Chapter 7 Reference 7-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. (The stand is not supplied with RX430-FC.) Attention • When attaching an arm or stand, follow the instructions of their User’s Manual.•...
Page 32 - Connection examples
32 Chapter7Reference 7-2. Connecting Multiple PCs The product has multiple connections to PCs and allows you to switch to one of the connections for display. Connection examples DVIconnector Signalcable (suppliedDD200-DL) Signalcable (suppliedPP200) DVI-Dconnector Digital (DVI) Digital (Disp...
Page 34 - Required System Environment; Connection Procedure (Setup of USB Function); USB hub) and the monitor’s USB upstream port.
34 Chapter7Reference 7-3. Making Use of USB (Universal Serial Bus) This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices. ● Required System Environment 1. A PC equipped...
Page 35 - Displaying signal information ; Displaying Monitor Information ; This function displays the information about the monitor.
35 Chapter7Reference 7-4. Displaying monitor information ● Displaying signal information <Signal Info> This function displays the information about the current input signals displayed. Procedure 1. Choose <Tools> from the Adjustment menu, and press . 2. Choose <Signal Info> from ...
Page 37 - Main Default Settings
37 Chapter7Reference Environmentalconditions Temperature Operating: 0°Cto35°C(32°Fto95°F) Storage: -20°Cto60°C(-4°Fto140°F) Humidity Operating: 20%to80%R.H.(nocondensation) Storage: 10%to80%R.H.(nocondensation) Airpressure Operating: 700to1,060hPa Storage: 200to1,060hPa...
Page 38 - Outside Dimensions; Accessories
38 Chapter7Reference Outside Dimensions unit:mm(inch) RX430/RX430-AR SWIVEL RANGE 119 (4.7) 76.7 (3.02) 172° 172° 648 (25.5) 627 (24.7) 256.5 (10.1) 44.5 (1.75) 50.7 (2.00) 38.35 (1.51) 720 (28.3) 643.3 (25.3) 38.35 (1.51) 498 (19.6) 402.8 (15.9) 255 (10.0) 25° 281.5 (11.1) 18.5 (0.73) 15.5 (0....
Page 39 - DICOM (Digital Imaging and Communication in Medicine)
39 Chapter7Reference 7-6. Glossary DDC (Display Data Channel) VESA provides the standardization for the interactive communication of the setting information, etc. between a PC and the monitor. DICOM (Digital Imaging and Communication in Medicine) The DICOM standard was developed by the American Co...
Page 40 - Resolution; A signal transmission system for digital interface.
40 Chapter7Reference HDCP (High-bandwidth Digital Content Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.This helps to transmit the digital contents safely by coding the digital contents sent via the DVI or HDMI connector on the o...
Page 41 - Appendix; Trademark
41 Appendix Appendix Trademark The DisplayPort icon and VESA are trademarks and registered trademarks of the Video Electronics Standards Association in the United States and other countries. Windows, Windows Vista, Windows Media, and Xbox 360 are registered trademarks of Microsoft Corporation in the...
Page 42 - Medical Standard; mammography images for diagnosis.
42 Appendix Medical Standard • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement.• Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, whe...
Page 43 - FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice
43 Appendix FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC.5710WarlandDrive,Cypress,CA90630Phone:(562)431-5011 declare that the product Tradename:EIZOModel:RadiForceRX4...
Page 44 - EMC Information; CAUTION
44 Appendix EMC Information Essential performance of RadiForce series is to display images and operate functions normally. CAUTION The RadiForce series requires special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use an...
Page 46 - and the RadiForce Series
46 Appendix Recommended separation distances between portable and mobile RF communications equipment and the RadiForce Series TheRadiForceseriesisintendedforuseinanelectromagneticenvironmentinwhichradiatedRFdisturbances arecontrolled.ThecustomerortheuseroftheRadiForceseries...
Page 47 - LIMITED WARRANTY
47 Appendix LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “ EIZO ”) and distributors authorized by EIZO (hereinafter referredtoasthe“ Distributors ”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter r...
Page 48 - BEGRENZTE GARANTIE
48 Appendix BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„ EIZO “bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „ Vertrieb(e) “ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „ Erstkäufer “ bezeichnet), der das in diesem Dokument...
Page 49 - GARANTIE LIMITÉE
49 Appendix GARANTIE LIMITÉE EIZO NANAO CORPORATION (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés« Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée « Garantie »), garantissent à l...
Page 50 - GARANTÍA LIMITADA
50 Appendix GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “ EIZO ”) y sus distribuidores autorizados por EIZO (en lo sucesivo los “ Distribuidores ”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“ Garantía ”), garantizanal...
Page 51 - GARANZIA LIMITATA
51 Appendix GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“ EIZO ”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“ Distributori ”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentoda...
Page 52 - BEGRÄNSAD GARANTI
52 Appendix BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “ EIZO ”) och EIZOs auktoriserade distributörer (nedan kallade “ Distributörer ”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “ Garantin ”) den ursprungligeköparen(nedanka...
Page 53 - 有限责任保证书
53 Appendix 有限责任保证书 EIZONANAO 有限公司 （ 以下简称 “ EIZO ”） 和 EIZO 授权的经销商 （ 以下简称 “ 经销商 ”）， 接受并依照本有限责任保证书 （ 以下简称 “ 保证书 ”） 之条款 ， 向从 EIZO 和经销商购买本文中所规定产品 （ 以下简称 “ 产品 ”） 的原买方 （ 以下称 “ 原买方 ”） 提供保证 ： 在保证期内 （ 规定如下 ）， 如果原买方发现 (i) 按本产品所附使用说明书 （ 以下简称 “ 用户手册 ”） 所述方式正常 使用本产品过程中 ， 本产品出现故障或损坏 ； 或 (ii) 按用户手册所述方式正常使用本产品过程中 ...
Page 54 - China Measures for RoHS Compliance in ChinaRoHS; 关于电子信息产品污染控制标识; 本标识根据「电子信息产品污染控制管理办法」
54 Appendix China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 （Pb） 汞 （Hg） 镉 （Cd） 六价铬 （Cr（VI） ） 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 印刷电路板...
Eizo EV2303W
Manual
Eizo EV2216W
Manual
Eizo S2242W
Manual
Eizo L557-AS
Manual
Eizo G22-BL/G22-CL
Manual
Eizo 4000e-LR
Manual
Eizo L352T-C
Manual
Eizo 1701
Manual
Eizo 4000e
Manual
Eizo T565
Manual
Eizo FlexScan F35
Manual
Eizo s19021
Manual
Eizo L550
Manual
Eizo S2433W
Manual
Eizo R22
Manual
Eizo 630L
Manual
Eizo LA-012-W
Manual
Eizo L375
Manual