Eizo RX220 - Manuals - manualsarea.com

Page 3 - Notice for this monitor; mammography images for diagnosis.

Notice for this monitor This product is suited to display medical images of such modalities as MRI and CT. It does not support the display of mammography images for diagnosis. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used...

Page 4 - Cleaning; LCD Panel; To use the monitor comfortably; according to the environmental conditions.

Cleaning Attention Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. • NOTE Optional ScreenCleaner is recommended for cleaning the panel surface. • ● LCD Panel Clean the LCD panel with a soft cl...

Page 5 - CONTENTS; Cover; - 6. Setting the Display Position of the; Specifications

CONTENTS CONTENTS Cover ............................................................. 1 Notice for this monitor ............................................. CONTENTS ............................................................. Chapter 1 Introduction ....................................... 6 1-1. F...

Page 6 - Chapter 1 Introduction; Thank you very much for choosing an EIZO Color Monitor.

6 Chapter 1 Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features Resolution: 2M pixels (Portrait : 1200 × 1600 dots (H × V))Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)3 signal input terminals (DVI-I x...

Page 7 - Indicator status; Disk contents and software overview; Item; To RadiCS LE or ScreenManager Pro for Medical

7 Chapter 1 Introduction 1-. Switches and Indicators 1 2 3 4 5 6 7 Switch Adjustment menu switch 5. switch switch 6. switch switch 7. Power Indicator switch Indicator status Operation status Green The screen is displayed Orange Power saving Off Main Power Switch / Power Switch off 1-. Utility Disk A...

Page 8 - Basic operation of Adjustment menu; Displaying Adjustment Menu; Choose a menu to adjust/set with; Exiting; Press

8 Chapter 1 Introduction 1- . Basic Operation and Functions Basic operation of Adjustment menu 1 Displaying Adjustment Menu Press . The adjustment menu appears. Current mode Menu title Settings Menu Item 2 Adjusting/Setting Choose a menu to adjust/set with , and press . Choose an item to adjust/set ...

Page 9 - Functions; Main Menu

9 Chapter 1 Introduction Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting Color Brightness “2-3. Color Adjustment” ( page 1 5 ) Contrast Temperature Gamma Advanced Settings Hue Saturation Outline Enhancer Gain 6 Colors Color...

Page 10 - Chapter Adjusting Screen; Compatible Resolutions/Frequencies; Windows Vista; Windows XP; Right-click the mouse anywhere on the desktop except for icons.; Mac OS X

10 Chapter 2 Adjusting Screen Chapter Adjusting Screen -1. Setting Screen Resolution Compatible Resolutions/Frequencies For details on compatible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup Manual. Setting Resolution When you connect the monitor to the PC and find that th...

Page 11 - Digital Input; When performing advanced adjustment, see “2-3 Color Adjustment” (; Analog Input; screen size correctly according to the PC to be used.; Perform the auto adjustment.; Procedure; step

11 Chapter 2 Adjusting Screen -. Displaying Screen Correctly Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-3 Color Adjustment” ( page 15 ) and subsequent pages. Analog Input Attention ...

Page 12 - Prepare the display pattern for the analog display adjustment.; Download the “Screen adjustment pattern files” from our site:

1 Chapter 2 Adjusting Screen 2 Prepare the display pattern for the analog display adjustment. Download the “Screen adjustment pattern files” from our site: http://www.radiforce.co m NOTE For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file. • ...

Page 13 - Adjust the clock with; Adjust the phase with; Adjust the position with

1 Chapter 2 Adjusting Screen 4 Perform advanced adjustments for the following using the <Screen> menu of the <Analog Adjustment>. Adjust the clock, phase and position, in this order. ● To eliminate vertical bars [Clock] Procedure Choose <Clock> from the <Analog Adjustment> me...

Page 14 - Adjust the color gradation.; To adjust color gradation automatically [Range Adjustment]

1 Chapter 2 Adjusting Screen 5 Adjust the color gradation. ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure Display Pattern 2 in full screen on the monitor using the screen adjustment patter...

Page 15 - To select the display mode (CAL Switch); CAL Switch mode; Mode; The mode among the list is highlighted in turn each time; or; To perform advanced adjustments

1 Chapter 2 Adjusting Screen -. Color Adjustment ● To select the display mode (CAL Switch) CAL Switch allows you to select easily the adequate mode suitable for the monitor’s application. CAL Switch mode Mode Purpose 1-DICOM Available to display in DICOM mode. 2-Custom Available for the color settin...

Page 16 - Adjustment items in each mode; According to the mode selected, the adjustable function differs.; Icon

16 Chapter 2 Adjusting Screen ● Adjustment items in each mode According to the mode selected, the adjustable function differs. (You can not select any function unavailable for adjustment or setting.) The adjustments or settings made for each mode are applied to all input signals. For the adjustment ...

Page 17 - Adjust the brightness with; Adjust the contrast with; To adjust the color temperature [Temperature]; Adjust the color temperature with

17 Chapter 2 Adjusting Screen ● To adjust the brightness [Brightness] The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure Choose <Color> from the Adjustment menu, and press . Choose <Brig...

Page 18 - Adjust the gamma value with; Adjust the hue with; To adjust the color saturation [Saturation]; Adjust the saturation of the color with

18 Chapter 2 Adjusting Screen ● To adjust the gamma value [Gamma] The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of...

Page 19 - To enhance the outline of the image [Outline Enhancer]; Select the display status in the range from -3 to 3 (soft to sharp) with; Adjust the gain with; Adjust the 6 colors with

19 Chapter 2 Adjusting Screen ● To enhance the outline of the image [Outline Enhancer] OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels composing the images. This may improve the texture of the material and its feel of the images. On the...

Page 20 - Menu; Select “Full Screen,” “Enlarged,” or “Normal” with

0 Chapter 2 Adjusting Screen - . Displaying Lower Resolutions ● To change screen size [Screen Size] You can change the screen size by using <Screen Size> from <Screen> menu. Menu Function Full Displays an image in full screen. Images are distorted in some cases because the vertical rate ...

Page 21 - Chapter Setting Monitor; Select the mode to change its settings with; down for at least 2 seconds to turn on the monitor.; Settings; Select “Finish” with

1 Chapter 3 Setting Monitor Chapter Setting Monitor -1. Enabling/Disabling Mode Selection [Mode Preset] Allows you to select the specified modes only.Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure Choose <Tools> from the Adj...

Page 22 - Using Image Rotation Function [Image Rotation]

Chapter 3 Setting Monitor -. Setting the EIZO Logo Display [Logo] This function allows you to display, or not, the EIZO logo. Procedure Press to turn off the monitor. Press holding down at least 2 seconds to turn on the monitor. The Optional Settings menu appears. Choose <Logo> from the <Op...

Page 23 - Selectable languages; Choose a language with; -6. Setting the Display Position of the Adjustment Menu; Adjust the menu position using the following procedure.; Select a menu position with

Chapter 3 Setting Monitor -. Setting Language [Language] This function allows you to select a language for the adjustment menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese Procedure Choose <Menu Settings...

Page 24 - To reset color adjustment values [Color Reset]; Select “Execute” with

Chapter 3 Setting Monitor -7. Restoring the Default Setting There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. Attention After resetting, you cannot undo the operation. • NOTE For main d...

Page 25 - Chapter Power Saving Function; signal inputs; Select “On” or “Off ” with; Power Saving System; PC; Select the indicator brightness “Off ” or in the range from 1 to 7 with

Chapter 4 Power Saving Function Chapter Power Saving Function -1. Setting the Power Saving [Power Save] This function allows you to set the monitor into the power saving mode according to the PC status.When the monitor enters the power saving mode, no image is displayed on the screen. Attention Turn...

Page 26 - Chapter Troubleshooting; Problems

6 Chapter 5 Troubleshooting Chapter Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No-picture problems → See No.1 - No.2.Imaging problems (digital input) → See No.3 - No.8.Imaging problems (analog input) → See No.3 - No.12.Other problems ...

Page 27 - Whole screen is flickering or blurring.

7 Chapter 5 Troubleshooting Problems Possible cause and remedy . Afterimages appear Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time.Use the screen saver or power save function to avoid displaying the same image for extended periods of time. • • 6. Green/re...

Page 29 - Chapter 6 Reference; an arm or stand of EIZO option.; panel surface facing down.

9 Chapter 6 Reference Chapter 6 Reference 6-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Attention When attaching an arm or stand, follow the instructions of their user’s manual.When using ...

Page 30 - -. Connecting More than Two PCs to the Monitor; the back of the monitor.; Connection examples; To switch the input signal; The input signal switches each time

0 Chapter 6 Reference 6-. Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on the back of the monitor. Connection examples D-Sub mini 15- pin connector DVIconnector Signal cable (supplied FD-C39) Signal cabl...

Page 31 - To set input signal selection [Input Selection]; Priority setting; Selection

1 Chapter 6 Reference ● To set input signal selection [Input Selection] The monitor recognizes the connector through which PC signals are input. Priority setting Function Auto When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Manual The monito...

Page 32 - Required System Environment; Connection Procedure (Setup of USB Function)

Chapter 6 Reference 6-. Making Use of USB (Universal Serial Bus) This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices. ● Required System Environment A PC equipped with a...

Page 33 - Displaying signal information [Signal Info]; Displaying monitor information [Monitor Info]; This function displays the information about the monitor.

Chapter 6 Reference 6- . Displaying Monitor Information ● Displaying signal information [Signal Info] This function displays the information about the current input signals displayed. Choose <Tools> from the Adjustment menu, and press . Choose <Signal Info> from the <Tools> menu, a...

Page 36 - Outside Dimensions; Connector Pin Assignment

6 Chapter 6 Reference Outside Dimensions 326 (12.08) 376 (14.08) 25 (0.98) 25 (0.98) 33 (1.30) 434 (17.01) 500 (19.07) 22.5 (0.89) 240 (9.04) 325 (12.08) 325 (12.08) 35° 35° 62.5 (2.46) 95 (3.74) PIV OT 90° 272.5 (10.07) 82 (3.23) 208.5 (8.02) 15 (0.59) 323 (12.07) 140 (5.05) 222.5 (8.08) 100 (3.09)...

Page 37 - DisplayPort connector; USB port; Signal; Accessories List

7 Chapter 6 Reference DisplayPort connector 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 Pin No. Signal Pin No. Signal Pin No. Signal 1 ML Lane3- 8 Ground 15 AUX CH+ 2 Ground 9 ML Lane1+ 16 Ground 3 ML Lane3+ 10 ML Lane0- 17 AUX CH- 4 ML Lane2- 11 Ground 18 Hot Plug Detect 5 Ground 12 ML Lane0...

Page 38 - analog signal inputs.

8 Chapter 6 Reference 6-6. Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is ...

Page 39 - Phase; that range adjustment be made before color adjustment.; Resolution; A signal transmission system for digital interface.

9 Chapter 6 Reference HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side a...

Page 40 - MHz

0 Chapter 6 Reference 6-7. Preset Timing The following table shows factory preset video timing (for analog signal only). Attention Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. If a signal other than those listed in the tab...

Page 41 - We, the Responsible Party; interference by one or more of the following measures.; Note; within the limits of a Class B digital device.; Canadian Notice; FCC Declaration of Conformity

1 For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland Drive, Cypress, CA 90630Phone: (562) 431-5011 declare that the product Trade name: EIZOModel: RadiForce RX220 is in conformity with Part 15 of the FCC...

Page 42 - EMC Information; CAUTION; Emission test

42 EMC Information Essential performance of RadiForce series is to display images and operate functions normally. CAUTION The RadiForce series requires special precautions regarding EMC and need to be installed, put into service and used according to the following information.Do not use any cables o...

Page 45 - 关于电子信息产品污染控制标识; 本标识根据「电子信息产品污染控制管理办法」

关于电子信息产品污染控制标识本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量部件名称有毒有害物质或元素铅（Pb）汞（Hg）镉（Cd）六价铬（Cr（VI））多溴联苯（PBB）多溴二苯醚（PBDE）印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○...