Eizo GS520-BLG - Manuals - manualsarea.com

Page 2 - FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice

For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: RadiForce GS520 is in conformity with Part 15 of the FC...

Page 3 - English

It shall be assured that the final system is in compliance to IEC60601-1-1 requirements. English

Page 4 - SAFETY SYMBOLS; Indicates a prohibited action.

SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a C...

Page 5 - TABLE OF CONTENTS

TABLE OF CONTENTS PRECAUTIONS .................................................................................................................... 4 1. Introduction .............................................................................................................................. 9 1-1. F...

Page 6 - PRECAUTIONS; Symbol

PRECAUTIONS PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and p...

Page 7 - WARNING; Do not open the cabinet or modify the unit.; OK; Set the unit in an appropriate location.

PRECAUTIONS WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not op...

Page 8 - To disconnect the power cord, grasp the plug firmly and pull.; Tugging on the cord may damage and result in fire or electric shock.; The equipment must be connected to a grounded main outlet.; Not doing so may result in fire or electric shock.; Use the correct voltage.; Touching them may result in electric shock.

PRECAUTIONS WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock.Power supply: 100-120/200-240 Vac 50/60Hz To disconnect the power cord, grasp the p...

Page 10 - Notice for this monitor

PRECAUTIONS Notice for this monitor The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer...

Page 11 - Tips

1. Introduction 1. Introduction Thank you for choosing an EIZO Monochrome Monitor. 1-1. Features • DVI (p.35) digital input (TMDS (p.35)) compliant • Horizontal scan frequency 31 - 135 kHz • Vertical scan frequency 19.0 - 61.0 Hz (VGA TEXT: 69 - 71 Hz, QSXGA: 19 - 51 Hz,) • Frame synchronous mode 49...

Page 12 - Front

10 1. Introduction 1-. Controls and Connectors Front (1) Mode Switch Displays the CAL Switch menu (p. 23). (2) Enter Switch Displays the Adjustment menu, determines an item on the menu screen, and saves values adjusted (3) Directing Switches * 1 (Left, Down, Up, Right) Chooses an adjustment item or ...

Page 16 - Connect the other end of the power cord to a power outlet.; Turn on the monitor's power by touching the power switch.; The monitor’s power indicator will light up green.

1 2. Installation 3 Connect the power cord to the power connector on the rear of the monitor. 4 Thread the power cord and signal cable through the cable holder on the rear of the monitor stand. NOTE •When threading the cables through the cable holder, lead them to the cable entrance side and pinch t...

Page 17 - Turn on the PC’s power.; to a USB compliant Windows computer (or other USB hub) with a

2. Installation 1 7 Turn on the PC’s power. The image will appear.If an image does not appear, refer to “7. Troubleshooting” (p. 29) for additional advice.When finished, turn off the PC and the monitor. Tips •Adjust the brightness of the screen depending on the brightness of your environment. •Be su...

Page 18 - Set the monitor orientation.; NOTE; Refer to the manual of the graphics board.; How to set

1 2. Installation -. Environmental Settings The monitor may need to be set in some environment. If you install it for the first time or change environment, set the monitor. • Set the signal corresponding to make a connection for non monochrome signal only specifications. • Set the monitor orientatio...

Page 19 - Restart the computer if the settings have been changed.

2. Installation 1 Monitor Orientation Display Example Landscape Select this option when using the Landscape orientation. A A Portrait (SW) Select this option when using the Portrait orientation.Graphics board utility software is used to rotate thedisplay image 90 degrees. Portrait (HW) Select this o...

Page 20 - Adjustment and Settings; . Adjustment and Settings; Adjustment

1 3. Adjustment and Settings . Adjustment and Settings -1. How to use the ScreenManager Screen adjustments and settings can be performed with the ScreenManager (OSD) and buttons of the monitor. Adjustment Startup Description ScreenManager menu Enter Switch 3-2. ScreenManager menu (p. 19) CAL Switch ...

Page 21 - Functions; Main menu

3. Adjustment and Settings 1 -. ScreenManager menu Using ScreenManager menu controls the screen adjustment and settings. Refer to the “Explanation” column in the following table for each detailed functions. Functions The following table shows all the ScreenManager’s adjustment and setting menus. Mai...

Page 22 - How to use the ScreenManager; Touch the enter switch.

0 3. Adjustment and Settings How to use the ScreenManager [Entering the ScreenManager] Touch the enter switch. [Making adjustments and settings] 1. Select the desired submenu icon with the directing switches and touch the enter switch. 2. Select the desired setting icon with the directing switches a...

Page 23 - You cannot disable all modes. Set one or more modes to “On”.; Operate the mouse or keyboard to return to a normal screen.

3. Adjustment and Settings 1 Mode Preset Function <Setup>-<Mode Preset> When CAL Switch mode is selected, the computer can be forced to display only specified modes. Use this function when the display modes are restricted or when the display should not be changed needlessly. [How to set]...

Page 24 - PC; Touch the power switch to return to a normal screen.; notice before the monitor's power is turned off.

3. Adjustment and Settings Off Timer <Others>-<Off Timer> The off timer function causes the monitor to turn off automatically after a predetermined amount of time has lapsed. This function was created to reduce the afterimages particular to LCD monitors, which appear when the screen is l...

Page 25 - CAL Switch Modes; Mode; How to use the CAL Switch Function; Touch the mode switch.; [Making brightness adjustments in CAL Switch mode]

3. Adjustment and Settings -. CAL Switch Function The most suitable display mode is available by switching the mode switch on the control panel. The <Brightness> settings can be adjusted on the CAL Switch menu. CAL Switch Modes Mode Description 1 - DICOM Used to display images in the DICOM mod...

Page 26 - Turn off the monitor power by touching the power switch.

3. Adjustment and Settings -. Adjustment Lock Function Use the “Adjustment Lock” function to prevent any accidental changes. Locked functions • Display, adjustment, and setting of the ScreenManager• Brightness adjustments to the CAL Switch mode Unlocked function • Selection of the CAL Switch mode wi...

Page 27 - Brightness Adjustment and Image Adjustment; The brightness of the entire screen can be set to a desired level.; Switch mode to the factory default setting.

4. Brightness Adjustment and Image Adjustment . Brightness Adjustment and Image Adjustment -1. Brightness Adjustment The brightness of the entire screen can be set to a desired level. [How to adjust] 1. Select <Brightness> in the ScreenManager <Mode> menu. 2. Make adjustments with the Le...

Page 28 - Required system environment; consult the manufacturer of each device about the USB support.; Connecting to the USB HUB

5. Making use of USB (Universal Serial Bus) . Making use of USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Req...

Page 29 - Connecting Examples

5. Making use of USB (Universal Serial Bus) 3 After setting up, the monitor’s USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor. Connecting Examples To use “RadiCS LE” (for Windows) or “ScreenManager Pro for Medical” (for Windows) Refer to the corre...

Page 30 - manufacturers before selecting.; Setup Procedure

6. Attaching an Arm . Attaching an Arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. NOTE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. - Hole spacing on th...

Page 31 - Problems

7. Troubleshooting . Troubleshooting If a problem persists even after applying the suggested remedies, contact an EIZO dealer. • No picture problems See No.1 ~ No.2 • Imaging problems See No.3 ~ No.6 • Other problems See No.7 ~ No.9 • USB problems See No.10 Problems Points to check with possible sol...

Page 33 - may cause damage to the cabinet or LCD panel.; Cabinet; clean the LCD panel again with a dry cloth for better finishing.

8. Cleaning 1 . Cleaning Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol, abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, w...

Page 35 - Dimensions; Default Settings; Optional

9. Specifications Dimensions PIV OT90° 512.5(20.2) 340(13.4) 388(15.3) 35° 35° SWIVEL 424(16.7) 480(18.9) 208.5(8.2) TILT40° 168(6.6) 325(12.8) 240(9.4) 88(3.46) 61.5(2.42) 78.5(3.09) 272.5(10.7) 24(0.94) 24(0.94) 28(1.1) 28(1.1) 466.5(18.4) 166(6.5) 95(3.74) 173(6.3) 32.5(1.28) 8(0.31) 15(0.59) 82(...

Page 36 - Pin Assignment; •USB Port; Signal

9. Specifications Network QC Management Software EIZO “RadiNET Pro” Ver.3.0.2 or laterEIZO “RadiNET Pro Lite” Ver.3.0.2 or later Cleaning Kit EIZO “ScreenCleaner” Signal Cable DD200DL-BK Pin Assignment •DVI-D Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 Pin No. Signal Pin...

Page 37 - A signal transition method for the digital interface.

10. Glossary 10. Glossary DICOM(Digital Imaging and Communication in Medicine) The DICOM standard was developed by the American College of Radiology and the National Electrical Manufacturer’s Association of the USA. The DICOM compatible device connection enables to transfer the medical image and inf...

Page 38 - EMC Information; CAUTION

EMC Information CAUTION The RadiForce series require special precautions regarding EMC and need to be installed, put into service and used according to the following information.Do not use any cables other than the cables that provided or specified by us. Using other cables may cause the increase of...