Page 2 - Location of Caution Statement
2 Location of Caution Statement <For USA-California Only> CR Coin Lithium Battery contains Perchlorate Material - special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorate . This product has been adjusted specifically for use in the region to which it was originally shipped. ...
Page 3 - Notice for this monitor
3 Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified...
Page 4 - Cleaning; To use the monitor comfortably; to the environmental conditions.
4 Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note ...
Page 5 - CONTENTS
5 CONTENTS CONTENTS Cover ...................................................................... 1 Notice for this monitor ............................................ 3 CONTENTS ............................................................. 5Chapter 1 Introduction ......................................
Page 7 - Chapter 1 Introduction; Thank you very much for choosing an EIZO color LCD monitor.; • Power Resolution function
7 Chapter1Introduction Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 23″ wide format LCD• Applicable to the resolution of 1920 × 1080.• Panel with a wide field of view adopted VA panel with 178º horizontal and vertical viewing angles. • HDMI con...
Page 8 - Monitor
8 Chapter1Introduction 1-2. Controls and Functions Monitor PowerManager Menu Color Sound Screen Monitor Settings Information 14 12 13 1 2 3 4 5 6 10 7 8 9 11 1. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction( page34 ). 2. Remote control detector Receivesthesignalfromth...
Page 9 - Remote Control; Before Using Remote Control; Insert a battery with the positive side up. (Battery model; Receivable Range of Remote Control; Use the remote control inside of the range as below.
9 Chapter1Introduction Remote Control 4 6 7 3 2 12 13 8 5 1 10 9 11 1. OFF TIMER Setsthetimeuntilthemonitorpower-off. 2. DISPLAY Displaysthecurrentinputport. 3. SCREEN SIZE Changesthescreensize. 4. POWER Turnsthepoweronoroff. 5. INPUT SELECT Switchesinputsignalsfordisplay. PC...
Page 10 - Disk contents and software overview; Item
10 Chapter1Introduction 1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and...
Page 11 - Basic operation of the Setting menu; Displaying the Setting menu; on the remote control. The Setting menu appears.; Exiting
11 Chapter1Introduction 1-4. Basic Operations and Functions ● Basic operation of the Setting menu 1. Displaying the Setting menu 1. Press on the remote control. The Setting menu appears. PowerManager Menu Color Sound Screen Monitor Settings Information 2. Adjusting/Setting 1. Choose a menu to adju...
Page 12 - Functions; Main menu
12 Chapter1Introduction ● Functions The following table shows all the Setting menu’s adjustment and setting menus. Main menu Setting Reference Color *1 ColorMode “2-3.AdjustingColor”(page15) BrightnessBlackLevelContrastSaturationHueTemperatureAdvancedSettings ContrastEnhancerPowerResolutio...
Page 13 - Chapter 2 Adjusting Screens; Recommended resolution
13 Chapter2AdjustingScreens Chapter 2 Adjusting Screens 2-1. Compatible Resolutions/Formats The monitor supports the following resolutions and signal format. Analog Input (D-Sub) Resolution Applicable Signals Vertical Scan Frequency Dot Clock 640×480 VGA,VESA,CEA-861 upto75Hz 148.5MHz (Ma...
Page 14 - Windows 7; resolution for “Screen resolution” under “Display”.; Mac OS X
14 Chapter2AdjustingScreens 2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 1. Right-click the mouse anywhere on the desktop except for icons.2. From the d...
Page 15 - Procedure; on the remote control.; The mode among the list is highlighted in turn each time
15 Chapter2AdjustingScreens 2-3. Adjusting Color ● To select the display mode (Color Mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Selectoneoftheseusermodestodefineadesiredsetofparametersettings. User2sR...
Page 16 - To perform advanced adjustments; Adjustable settings in each mode; Function
16 Chapter2AdjustingScreens ● To perform advanced adjustments The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each mode. Attention • The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or mo...
Page 17 - To adjust brightness “Brightness”; To adjust black level “Black Level”; Adjustable range
17 Chapter2AdjustingScreens ● To adjust brightness “Brightness” The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Brightness” in th...
Page 18 - To adjust contrast “Contrast”; To adjust the color saturation “Saturation”
18 Chapter2AdjustingScreens ● To adjust contrast “Contrast” The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Contrast” in the “Color” menu, and press . The “Contrast” menu ...
Page 19 - To adjust hue “Hue”; To adjust color temperature “Temperature”
19 Chapter2AdjustingScreens ● To adjust hue “Hue” This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Hue” in the “Color” menu, and press . The “Hue” menu appears. 3. Use or for adjustment. 4. Press to exit the...
Page 20 - To set ContrastEnhancer “ContrastEnhancer”; To reduce image blur “Power Resolution”
20 Chapter2AdjustingScreens ● To set ContrastEnhancer “ContrastEnhancer” This function allows you to set whether to automatically adjust the contrast according to the darkness or brightness of a scene, for example. Procedure 1. Choose “Color” in the Setting menu, and press . 2. Choose “Advanced S...
Page 21 - To adjust gamma “Gamma”; To adjust gain “Gain”
21 Chapter2AdjustingScreens ● To adjust gamma “Gamma” Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is c...
Page 22 - To set overdrive intensity “Overdrive”; Digital Signal Input
22 Chapter2AdjustingScreens ● To set overdrive intensity “Overdrive” This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image lags by setting it to “Enhanced” when displaying animated images. Adjustable range Enhanced, Standard, Off Procedure 1. Ch...
Page 23 - Setting Procedures; Prepare to use analog screen adjustment patterns.
23 Chapter2AdjustingScreens Setting Procedures 1. Perform the auto adjustment. ● To adjust flickering, screen position, and screen size automatically “Auto Screen Adjust” Procedure 1. Choose “Screen” in the Setting menu, and press . 2. Choose “Auto Screen Adjust” in the “Screen” menu, and press ....
Page 24 - To eliminate vertical bars “Clock”; To remove flickering or blurring “Phase”
24 Chapter2AdjustingScreens 4. Choose “Screen” from the Setting menu to perform advanced adjustments. Adjust the clock, phase and position, in this order. ● To eliminate vertical bars “Clock” Procedure 1. Choose “Clock” in the “Screen” menu, and press . The “Clock” menu appears. 2. Adjust the clo...
Page 25 - To correct the screen position “Position”; Adjusting color gradation.; To adjust color gradation automatically “Auto Range Adjust”
25 Chapter2AdjustingScreens ● To correct the screen position “Position” Note • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position. Pro...
Page 26 - Modify blurred characters or lines.; To modify blurred characters/lines “Smoothing”; Choose “Screen” in the Setting menu, and press; or; Setting
26 Chapter2AdjustingScreens 6. Modify blurred characters or lines. ● To modify blurred characters/lines “Smoothing” When an image is displayed with a resolution other than recommended, the characters or lines of the displayed image may blur. Attention • Smoothing setting may not be required depen...
Page 27 - To set the screen ratio “Overscan”
27 Chapter2AdjustingScreens ● Digital Input (HDMI: video signal) The screen size can be changed with the “Screen Size” function. Setting Function Screen Display Auto Themonitorautomaticallychangesthescreensizeaccordingtotheaspectratioandresolutioninformationfromtheexternaldevice...
Page 28 - Chapter 3 Setting Monitor; To turn the volume up/down; To mute the sound temporarily; -2. Switching sound source for HDMI signal input
28 Chapter3SettingMonitor Chapter 3 Setting Monitor 3-1. Adjusting Volume ● To turn the volume up/down This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure 1. Press or on the remote control. Note • Alternatively, you can use or on the monitor for adjustment. (see “1-2...
Page 29 - -3. To adjust the sound level “Sound Level”
29 Chapter3SettingMonitor 3-3. To adjust the sound level “Sound Level” The input sound level can be adjusted.The volume difference may occur depending on the kinds of input signals, since the average sound level of the external device differs. Adjustable range -1 to 1 Procedure 1. Choose “Sound” ...
Page 30 - -6. Setting the EIZO Logo Display “Logo”; -8. Changing the HDCP authentication setting for
30 Chapter3SettingMonitor 3-6. Setting the EIZO Logo Display “Logo” When the monitor is turned on, the EIZO logo appears on the screen. You can choose to display or not to display the EIZO logo. Procedure 1. Choose “Monitor Settings” in the Setting menu, and press . 2. Choose “Logo” in the “Monit...
Page 31 - -9. Resetting the Monitor to the Default Settings; To reset the color adjustments “Color Reset”; To reset all adjustments to the default settings “Reset”
31 Chapter3SettingMonitor 3-9. Resetting the Monitor to the Default Settings There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full Reset for resetting all settings to the defaults. Attention • After resetting, you cannot undo the ope...
Page 32 - Chapter 4 Power Saving Functions; Analog Signal Input; When the external device connected is a PC
32 Chapter4PowerSavingFunctions Chapter 4 Power Saving Functions 4-1. Setting Power Saving “Power Save” ● Monitor This function allows you to specify whether to set the monitor into the power saving mode, depending on the state of an external device connected to it. When the monitor has shifted ...
Page 33 - Exiting the power saving mode; Audio Output; -2. Setting Power Indicator “Power Indicator”
33 Chapter4PowerSavingFunctions Attention • When all the conditions below are met, the monitor does not change to the power saving mode even if “Power Save” is set to “Enable”:- “Power Save” for Sound is set to “Sound On” ( “Audio Output” (page 33) ) - In the mute state ( “To mute the sound temp...
Page 34 - Adjustment “Auto EcoView”
34 Chapter4PowerSavingFunctions 4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView” The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be...
Page 35 - Canceling Off Timer; until “Disable” appears.; Checking the remaining time; when the Off Timer is set.; Extending the time of the Off Timer; while the remaining time is displayed.
35 Chapter4PowerSavingFunctions Canceling Off Timer 1. Press until “Disable” appears. Checking the remaining time 1. Press when the Off Timer is set. The time to turn off the power appears. Extending the time of the Off Timer 1. Press while the remaining time is displayed. Each time you press , ...
Page 36 - Chapter 5 Connecting Cables; -1. Connecting Multiple External Devices; Connection examples; To switch among input signals; Press
36 Chapter5ConnectingCables Chapter 5 Connecting Cables 5-1. Connecting Multiple External Devices The product has multiple connections to external devices and allows you to switch to one of the connections for display. Attention • Do not use dual link cables. Connection examples DVI-HDMIconverte...
Page 37 - Chapter 6 Troubleshooting; No picture; Problem
37 Chapter6Troubleshooting Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No picture Problem Possible cause and remedy 1. No picture • Powerindicatordoesnotlight. • Checkwhetherthepowercordisconnectedproperly.• T...
Page 38 - Imaging problems (for both digital and analog)
38 Chapter6Troubleshooting Imaging problems (for both digital and analog) Problem Possible cause and remedy 3. The screen is too bright or too dark. • Use“Brightness”or“Contrast”intheSettingmenuto adjustit.(TheLCDmonitorbacklighthasalimitedlifespan.Whenthescreenbecomesdark...
Page 40 - Other problems
40 Chapter6Troubleshooting Other problems Problem Possible cause and remedy 15. The “Smoothing” on the Setting menu “Screen” cannot be selected. • Youcannotchoose“smoothing”whenthescreenis displayedinthefollowingresolutionsorsettings. - Theresolutionis1920×1080 - ScreenSiz...
Page 41 - Chapter 7 Reference; Turn the fixing screws for the Stand base to detach it.; Attach the arm or stand to the monitor.
41 Chapter7Reference Chapter 7 Reference 7-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an ...
Page 42 - -3. Displaying Monitor Information “Information”; Choose “Information” in the Setting menu, and press
42 Chapter7Reference 7-2. Attaching the Stand base The once removed the Stand base can be attached to the monitor again with the following procedures. Procedure 1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2. Attach the Stand base. Hold...
Page 44 - Main Default Settings
44 Chapter7Reference Dimensions(Width)×(Height)×(Depth) Mainunit 549mm(21.6inch)×403mm(15.9inch)×212mm(8.3inch) Mainunit(withoutstand) 549mm(21.6inch)×393mm(15.5inch)×58mm(2.28inch) Mass Mainunit Approx.6.9kg(15.2lbs) Mainunit(withoutstand) Approx.6.1kg...
Page 45 - Outside Dimensions; Accessories
45 Chapter7Reference Outside Dimensions Unit:mm(inch) 18.6 (0.73) 511.8(20.1) 549(21.6) 38 (1.5) 365(14.4) 486(19.1) 32(1.26) 58 (2.28) 180(7.1) 171(6.7) 212(8.3) 62 (2.44) 14(0.55) 14(0.55) 20° 5° 216(8.5) 224.5(8.8) 100(3.9) 224.5(8.8) 113(4.4) 100(3.9) 152(6) 403(15.9) 18.6 (0.73) 288.8(11.4)...
Page 46 - Clock
46 Chapter7Reference 7-5. Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse i...
Page 48 - VESA DPM (Video Electronics Standards Association - Display Power; The following table shows factory preset analog signal timing:
48 Chapter7Reference VESA DPM (Video Electronics Standards Association - Display Power Management) VESA specifications achieve increased energy efficiency for computer monitors. This involves standardization of signals sent from the computer (graphics board).DPM defines the status of signals trans...
Page 49 - Appendix; Trademark
49 Appendix Appendix Trademark VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other countries.Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States...
Page 50 - TCO; FCC Declaration of Conformity; We, the Responsible Party; Canadian Notice
50 Appendix TCO This product has acquired the TCO standard that relates to the safety, ergonomics, environment and so forth of office equipment. For an overview of the TCO, refer to our web site. http://www.eizo.com FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC...
Page 51 - Hinweis zur Ergonomie :
51 Appendix Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des S...
Page 52 - LIMITED WARRANTY
52 Appendix LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “ EIZO ”) and distributors authorized by EIZO (hereinafter referredtoasthe“ Distributors ”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter r...
Page 53 - BEGRENZTE GARANTIE
53 Appendix BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„ EIZO “bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „ Vertrieb(e) “ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „ Erstkäufer “ bezeichnet), der das in diesem Dokument...
Page 54 - GARANTIE LIMITÉE
54 Appendix GARANTIE LIMITÉE EIZONANAOCORPORATION(ci-aprèsdénommé« EIZO »)etlesdistributeursautorisésparEIZO(ci-aprèsdénommés « Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée« Garantie »),garantissentàl’acheteurinitial(ci...
Page 55 - GARANTÍA LIMITADA
55 Appendix GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “ EIZO ”) y sus distribuidores autorizados (en lo sucesivo los “ Distribuidores ”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“ Garantía ”), garantizanalcompradoro...
Page 56 - GARANZIA LIMITATA
56 Appendix GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“ EIZO ”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“ Distributori ”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentoda...
Page 57 - BEGRÄNSAD GARANTI
57 Appendix BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “ EIZO ”) och EIZOs auktoriserade distributörer (nedan kallade “ Distributörer ”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “ Garantin ”) den ursprungligeköparen(nedanka...
Page 58 - ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ
58 Appendix ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO NANAO CORPORATION (στο εξής « EIZO ») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής « Διανομείς ») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής « Εγγύηση »),στοναρχικό...
Page 59 - ОГРАНИЧЕННАЯ ГАРАНТИЯ
59 Appendix ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “ EIZO ”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “ Дистрибуторы ”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейше...
Page 60 - 有限责任保证书
60 Appendix 有限责任保证书 EIZO NANAO 有限公司 （ 以下简称 “ EIZO ”） 和 EIZO 授权的经销商 （ 以下简称 “ 经销商 ”）， 接受并依照本有限责任保证书 （ 以下简称 “ 保证书 ”） 之条款 ， 向从 EIZO 和经销商购买本文中所规定产品 （ 以下简称 “ 产品 ”） 的原买方 （ 以下称 “ 原买方 ”） 提供保证 ： 在保证期内 （ 规定如下 ）， 如果原买方发现按本产品所附使用说明书 （ 以下简称 “ 用户手册 ”） 所述方式正常使 用本产品过程中 ， 本产品出现故障或损坏 ， EIZO 和经销商根据其独自的判断免费修理或更换该产品 。 本保...
Page 61 - China Measures for RoHS Compliance in ChinaRoHS; 关于电子信息产品污染控制标识; 本标识根据「电子信息产品污染控制管理办法」
61 Appendix China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 （Pb） 汞 （Hg） 镉 （Cd） 六价铬 （Cr（VI） ） 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 印刷电路板...
Eizo EV2303W
Manual
Eizo EV2216W
Manual
Eizo S2242W
Manual
Eizo L557-AS
Manual
Eizo G22-BL/G22-CL
Manual
Eizo 4000e-LR
Manual
Eizo L352T-C
Manual
Eizo 1701
Manual
Eizo 4000e
Manual
Eizo T565
Manual
Eizo FlexScan F35
Manual
Eizo s19021
Manual
Eizo L550
Manual
Eizo S2433W
Manual
Eizo R22
Manual
Eizo 630L
Manual
Eizo LA-012-W
Manual
Eizo L375
Manual