Eizo CG211 - Manuals - manualsarea.com

Page 3 - Indicates a prohibited action.

This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate ...

Page 5 - Do not open the cabinet or modify the unit.

IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper maintenance, pleas...

Page 6 - Not doing so may result in fire, electric shock, or equipment damage.

Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slot...

Page 7 - To disconnect the power cord, grasp the plug firmly and pull.; Tugging on the cord may damage and result in fire or electric shock.; The equipment must be connected to a grounded main outlet.; Not doing so may result in fire or electric shock.; Use the correct voltage.; * Do not place the cord underneath the unit or other heavy objects.; Never touch the plug and power cord if it begins to thunder.; Touching them may result in electric shock.

Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock.Power supply: 100-120/200-240 VAC±10 %, 50/60 Hz To disconnect the power cord, grasp the plug firmly an...

Page 8 - The backlight of the LCD panel contains mercury.; Handle with care when carrying the unit.; Dropping the unit may result in injury or equipment damage.

When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a da...

Page 9 - Do not block the ventilation slots on the cabinet.; * Do not place any objects on the ventilation slots.; Do not touch the plug with wet hands.; Doing so may result in electrical shock.; Use an easily accessible power outlet.

Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equip...

Page 12 - Front

* LCD Monitor * Calibration software "ColorNavigator"(in the CD-ROM) * Power Cord * Analog Signal Cable (FD-C16) * "ColorNavigator" Quick Referenc * Digital Signal Cable (FD-C39) * Adjustment Certificate * EIZO USB Cable (MD-C93) * LIMITED WARRANTY * Setup Guide * Cleaning kit "S...

Page 13 - Power Indicator; Rear

(1) ScreenManager ® (2) Main Power Switch(3) Input Signal Selection Button(4) Auto Adjustment Button(5) Enter Button(6) Control Buttons (Up, Down, Left, Right) *1 (7) Power Button(8) Power Indicator *2 Blue Operation Flashing blue(2 times for each) Notify that the monitor needs to be recalibrated in...

Page 14 - Stand

(9) Height Adjustable Stand (Detachable) *3 (10) Security Lock Slot *4 (11) DVI-I Input Connector x 2 (SIGNAL 1 / SIGNAL 2)(12) USB Port (1 Upstream)(13) USB Port (2 Downstreams)(14) Power Connector *3 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clo...

Page 15 - and the other end of the cable into the video connector on the PC.

Before connecting your monitor to the PC, change the display screen settings ( resolution and frequency) in accordance with the APPENDIX charts. * When your computer supports VESA DDC, the suitable resolution and the refresh rate are set by just plugging your monitor into the computer without any ma...

Page 17 - stand and the Portrait/Landscape display.; Plug the other end of the power cord into a power outlet.; The monitor’s power indicator will flash yellow slowly.; WARNING

* The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. 4.Plug the other end of the power cord into a power outlet. The monitor’s power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the stand...

Page 18 - Turn on the monitor's power button and then switch on the PC's; Whenever finished, turn off the PC and the monitor.

5.Turn on the monitor's power button and then switch on the PC's power. The monitor's power indicator will light up (blue).If an image does not appear, refer to the " 7. TROUBLESHOOTING " for advice. Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kind ...

Page 19 - Plug the power cord into the power connector on the rear of the

Signal Cable Connector on PC PC Signal Cable (FD-C39 enclosed) +ADC-DVI display adapter (commercially available) Video Output Connector / ADCInput Connector (monitor) / DVI Power Mac G4 / G5(ADC) * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is comme...

Page 21 - Change the input selection setting of the connector in the Input; Press Enter button to complete the setting and the menu closes.

6.Change the input selection setting of the connector in the Input Selection menu to "ADC". Press Enter button to complete the setting and the menu closes. 7.Switch on the PC's power. The monitor's power indicator will light up (blue).If an image does not appear, refer to the " 7. TROUBL...

Page 23 - Priority; When the power of the monitor is turned ON.

Selecting the Active Input The Input Signal Selection button on the control panel can be used to select either SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Signal 1 or 2/ Analog or ...

Page 24 - Setup Procedure; monitor until the hood is firmly positioned against the monitor.

Manual The monitor will not detect signals automatically in this mode. Select the active input by pressing the input signal selection button on the monitor's control panel. * When "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in power sav...

Page 27 - Attach an arm stand to the LCD monitor securely.

4.Attach an arm stand to the LCD monitor securely. 4 Mounting Screws (enclosed) : M4 x 15(mm)

Page 28 - button to save the settings.

ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. * Main Menu and FineContrast menu cannot be activated at the same time. 1.Entering the ScreenManager Press the Enter button once to display the main menu of the ScreenManager. 2.Making A...

Page 29 - Exiting the ScreenManager; FineContrast menu

3.Exiting the ScreenManager (1) To return to the main menu, select the <Return> icon or press the Down button twice, followed by the Enter button. (2) To exit the ScreenManager, select <Exit> icon or press the Down button twice, followed by the Enter button. * Double clicking the Enter b...

Page 31 - To select the Mode; Exit

This function allows you to select the best suited mode for screen display. To select the Mode Directly pressing the Left or Right button allows you to select the best suited mode for screen display from 3 FineContrast modes; sRGB, Custom and CAL. Color settings each mode can be adjusted by using th...

Page 32 - Color Adjustment of the Mode Settings; Detailed Adjustments; Adjustment Lock

Color Adjustment of the Mode Settings <Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select the desired function icon with the Up/Down Control buttons and adjust with the Left/Right Control buttons. (Setting(s) of <Temperature> and/...

Page 33 - Off Timer

[To unlock] Switch off the monitor's power by the power button on the front control panel, then hold Down the Auto Adjustment button once again and turn the power back on. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of tim...

Page 34 - advance notice before the monitor's power is switched off.; Power Indicator setting

* The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is switched off. Power Indicator setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] (1) Select <Power Indicator&g...

Page 36 - Clock

2.Run the "Screen Adjustment Program". Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu ...

Page 37 - Phase

(2) Horizontal bars appear on the screen. => Use the < Phase > adjustment. Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using the Right and Left buttons. * Horizontal bars may not completely disappear from the screen depending on the PC. (3) The scre...

Page 38 - (4) Screen image is smaller or larger than the actual screen images.; Range Adjustment

(4) Screen image is smaller or larger than the actual screen images. => Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is...

Page 39 - Enlarge the screen size when displaying a low resolution.; Menu; Full; Smooth the blurred texts of the enlarged screen.

The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1.Enlarge the screen size when displaying a low resolution. => Select the <Screen Size>. Select the <Screen Size> in th...

Page 40 - Set the brightness of the black area surrounding the displayed; Adjustment Items

* <Smoothing> is disabled when the screen is displayed in the following resolutions. ● 1600 x 1200 ● The image size is doubled both in horizontally and vertially to (i.e. 1600 x 1200 enlarged from 800 x 600) provide clear focus which does not require this function. 3.Set the brightness of the ...

Page 41 - Adjustment Contents; Temperature

"*": Settable/Adjustable Icons Functions FineContrast Modes sRGB Custom CAL Brightness** * * - Temperature** - * - Gamma** - * - Saturation - * - Hue - * - Gain - * - 6 colors - * - Reset - * - **These settings can be also adjusted on the FineContrast menu. * Allow the LCD monitor to stabili...

Page 43 - Analog Input; VESA DPMS

The <PowerManager> menu in the ScreenManager enables to set the power-save setup. * Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. * Even if the monitor is in a powe...

Page 44 - Digital Input; DVI DMPM

Digital Input This monitor complies with the " DVI DMPM ". [Procedure] (1) Set the PC's power saving settings. (2) Select "DVI DMPM" from the <PowerManager> menu. [Power saving system] PC Monitor Power Indicator Operation Operation Blue Power saving/Off mode Power saving Yellow...

Page 45 - Operating Procedures

ActiveRotationII function allows you to change the display orientation of the monitor with the panel rotation. Reder to Web site of EIZO NANAO CORPORATION for the latest information about supported graphics card (http://www.eizo.com/). * After changing the display orientation, it may take some time ...

Page 46 - When the screen image is expanded or contracted, restart the

2.When the screen image is expanded or contracted, restart the PC. The ActiveRotationII function may not work correctly using with some graphics card or OS. When the screen image remains to be expanded or contracted after restarting the PC, please try to change the screen resolution setting of your ...

Page 47 - Required System Environment; * PC equipped with USB ports or another USB hub connected to the USB; Connecting to the HUB USB

This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub which the USB compliant peripherals can be easily connected. Required System Environment * PC equipped with USB ports or another USB hub connected to the ...

Page 49 - Try pressing a key on the keyboard, or; Following messages

If a problem persists even after applying the suggested remedies, contact an EIZO dealer. ● No picture problems : See No.1 ~ No.2 ● Imaging problems : See No.3 ~ No.14 ● Other problems : See No.15 ~ No.18 ● USB problems : See No.19 ~ No.20 Problems Points to check with possible solutions 1. No pictu...

Page 50 - Display position is; Position; Screen image is smaller; Resolution; Vertical bars of distortion; The characters and; [ ] Adjust the characters and images using the

Whenever an error signal message appears, the signal frequency will be displayed in red. (Example) [ ] Use the graphics board's utility software to change the frequency setting. (Refer to the manual of the graphics board.) 3. Display position is incorrect. [ ] Adjust the image position using the <...

Page 52 - The FineContrast mode; To; USB function cannot be

15.The <Smoothing> cannot be selected. [ ] <Smoothing> is disabled when the screen is displayed in the 1600 x 1200. [ ] <Smoothing> is disabled when "Normal" is selected in the <Screen Size> menu. [ ] The image size is doubled both in horizontally and vertically to (i...

Page 56 - Default settings

Weight 10.2 kg (22.5 lbs.) Weight (without stand) 7.0 kg (15.4 lbs.) Weight (with hood) 10.8 kg (24 lbs.) Temperature Operating: 0 °C - 35 °C (32 °F - 95 ° F)Storage: -20 °C - 60 °C (-4 °F - 140 ° F)Humidity 30% to 80% R.H. Non-condensing USB standard USB Specification Revision 2.0 USB ports Upstrea...

Page 57 - Beeper settings; Short beep; Dimensions

Beeper settings Short beep ScreenManager item selected. ScreenManager parameter adjusted to minimum or maximum limit. Input Signal Selection button pressed. Long beep Auto Adjustment button pressed. ScreenManager data-save executed. 4 short beeps Monitor not connected correctly. PC turned off. Monit...

Page 58 - Pin Assignment; USB Ports

Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data 2- 11 TMDS Data 1/3 Shield 21 NC 2 TMDS Data 2+ 12 NC 22 TMDS Clock Shield 3 TMDS Data 2/4 Shield 13 NC 23 TMDS Clock+ 4 NC* 14 +5V Power 24 TMDS Clock- 5 NC 15 Ground (return for +5V, Hsync and Vsync) C1 Analog ...

Page 61 - A signal transition method for the digital interface.

Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole co...

Page 67 - For more information, please visit

The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly directio...

Page 69 - All recycling information is placed in the following websites.; Recycling-Information für Kunden in Europa:

Hinweis zur Ergonomie Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem Videosignal, 1600 Punkte X 1200 Zeilen, RGB digital, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Bla...

Page 70 - Återvinningsinformation för kunder i EU:; All information om återvinning finns på följande webbsidor:; Recycling Information for customers in USA:; Der Standfuß muß den nachfolgenden Anforderungen entsprechen:

Återvinningsinformation för kunder i EU: All information om återvinning finns på följande webbsidor: http://www.swico.ch http://www.eizo.de http://www.eizo.se Recycling Information for customers in USA: All recycling information is placed in the Eizo Nanao Technologies, Inc.'s website. http://www.ei...