Ei Electronics Ei100B - Manuals

Ei Electronics Ei100B – Manual in PDF format online.

Manuals:

Manual Ei Electronics Ei100B

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Installing your Smoke Alarm; Looking after your Smoke Alarm; Connection and Replacement of Batteries.; EI; EI; Figure 6

Installing your Smoke Alarm (a) Attaching to Ceiling or Wall. (NB: for wiring the EI 100C Interconnect model see page 9 ) The Smoke Alarm is battery operated and needs no wiring, ( EI 100C excepted). Use figure 6 below, as a help in mounting. 1. Pull Cover open at Tab (2). Remove Cover from Base bys...

Page 3 - Important Safeguards; Planning your Escape for when the Alarm goes off; NEVER

A maximum of 250 metres (820ft) of 18 AWG (0.82mm) wire canbe used, (maximum resistance between detectors 50 ohm). Theunits are interconnected by wiring all the terminals marked 1 to-gether, and all the terminals marked 2 together, as shown in Fig-ure 10. An opening should be made in the label cover...

Page 4 - MUST; be given to the householder.; VOLT IONISATION; IMPORTANT NOTICE; THIS IS NORMAL

Getting your Smoke Alarm Serviced If your Smoke Alarm fails to work after you have read the sec-tions on “Connecting the battery” and “Looking after your SmokeAlarm” contact Customer Assistance at the nearest addressgiven at the end of this leaflet. If it needs to be returned for repairor replacemen...

Ei Electronics Manuals