Edelbrock 33503 - Manuals

Step 4 Removal of rear shock Step 7 Assembly of IAS shocks 4(a) Loosen upper and lower nuts. 4(b) In order to remove bolts, they may need a little gentle persuasion with a pry bar. Bolt should come out by hand. (See Fig. 3). 4(c) Shock will now come out through the top. Step 5 Disassembly of coil sp...

8(e) Align end of coil spring to lowest point on spring seat before releasing the spring compressor. (See Fig. 11). Fig 11 Step 9 Assembly of Rear IAS shocks 9(a) Rear rod end uses the long threads. The procedure of assembly is the same as the front. (See Fig. 9). Step 10 Installing IAS shocks Reins...

10(b) Front sway bar end links may now be reinstalled. Install both left and right at the same time. After both sides are in position, the end link to control arm nuts can now be torqued to 16 ft. lbs. 10(c) Important: After all four shocks are installed, place jack or jack stand under control arm t...