Eclipse CD5444 - Manuals

13 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or abadly warped disc may cause deteriorated sound quality or intermittentplayback. Observe the following precautions to ensure high qualit...

15 Operating precautions About borrowed CDs • D o n o t u s e a C D w i t h g l u e o r r e m n a n t s o f a d h e s i v e t a p e o rlabels. They may cause the CDto get stuck inside or damagethe deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.P r e s s...

16 Operating precautions • Do not store Memory Sticks in places that are s u b j e c t t o s t a t i c e l e c t r i c i t y a n d e l e c t r i c a linterference, otherwise the data they contain maybecome corrupted. • I n o r d e r t o p r o t e c t t h e p l a y e r , t h e p l a y e r ' s f u n c...

18 Operating precautions About cleaning the Memory Sticks • In order to maintain good audio performance from Memory Sticks, periodically wipe the cartridgeclean of any dust and other contamination with adry cloth.

19 Names of controls and parts Never place an object or rest your hands or the like on the frontpanel. Caution Names of controls and parts Switches disc modes and switches to AUX mode. Activates and deactivates mute. Opens/closes front panel. Selects radio preset channels and performs disc mode func...

20 ESN security operating procedure About ESN ESN security operating procedure This deck is equipped with ESN (ECLIPSE Security Network). A pre-registered music CD (Key CD), four-digit security code, or a MemoryStick on which a all unit functions will not operate, even by turningthe ignition switch ...

21 ESN security operating procedure [FUNC] button Button [3] How to switch the security type (Key CDsecurity/Memory Stick security) You can switch the type of security being used (Key CD security orMemory Stick security). The initial setting is for Key CD security to beused. Check that the Power is ...

22 ESN security operating procedure How to operate the ESN (Key CD) security [FUNC] button Button [6] [OPEN] button Check that the Power is OFF. Press and hold button [6], then the [FUNC] button, andhold both for more than one second. A [SEC] message appears, in two seconds it will change to[DISC]. ...

23 ESN security operating procedure Press the [OPEN] button. The front panel closes. 5 Check that the Power is OFF. Press and hold button [6], then the [FUNC] button, andhold both for more than one second. A [SEC] message appears, then in two seconds it willchange to [DISC]. Press the [OPEN] button....

24 ESN security operating procedure First, cancel the existing Key CD. Refer to "How to cancel the key CD". Next, program a new Key CD. Refer to "How to program the Key CD". 2 1 How to change the Key CD If power is disconnected while ESN security is active (a KeyCD was programmed), o...

25 ESN security operating procedure Note If after 5 tries the correct Key CD is not inserted, the displayreads [CALL800]; the unit must be returned to Eclipse to bereset. In this case, please contact your Eclipse dealer forassistance. For country-specific customer service information,refer to "H...

26 ESN security operating procedure [FUNC] button Buttons [1] to [4] How to operate the ESN (Memory Stick) security Check that the Power is OFF. Press and hold button [1], then the [FUNC] button, andhold both for more than one second. A [SEC] message appears, in two seconds it will change to[MS]. 2 ...

28 ESN security operating procedure [FUNC] button Buttons [1] to [4] The security function can be canceled when the security codethat has been recorded with the deck is entered and verified.Canceling the security function can be done by entering thesecurity code into the deck, or by using the Memory...

30 ESN security operating procedure Insert the Memory Stick and close the front panel. The recorded data will be read from the Memory Stick. If the contents recorded in the Memory Stick match theinformation recorded by the deck, [CANCEL] will appearon the display. The security function will be cance...

31 ESN security operating procedure [FUNC] button Buttons [1] to [4] I f p o w e r i s d i s c o n n e c t e d w h i l e E S N s e c u r i t y i s a c t i v e ( asecurity code was recorded), operation is disabled until poweris restored and the unit unlocked. Follow this procedure toresume normal ope...

34 ESN security operating procedure After the 5th incorrect attempt, the display reads [HELP]for five seconds. After the [HELP] message will appear for five seconds,serial number will appear.You will only get 5 unsuccessful unlock code entries. Afterthe 5th attempt, you will be asked to insert the D...

35 ESN security operating procedure [FUNC] button Button [5] How to operate the ACC security ACC security involves using Memory Stick security to record asecurity code, and then when the ignition switch is turned to OFFand back to ACC, the operation of all buttons is disabled. Check that the Power i...

36 ESN security operating procedure [FUNC] button Button [2] How to turn the security indicator on/off Once ESN security is activated, the indicator flashes whenever thevehicle's ignition switch is turned off, warning potential thieves thatthe unit is protected. However, if do not want this visible ...

37 ESN security operating procedure [FUNC] button Button [4] How to read the Electronic Serial Number Check that the Power is OFF. 1 Press and hold button [4], then the [FUNC] button, andhold both for more than one second. 2 [ E S N ] a p p e a r s o n t h e d i s p l a y , f o l l o w e d b y a n e...

38 Basic operation Turning the power on and off.When the power is turned on, the state used when the power wasturned off such as CD and tuner playing is restored.When the vehicle has no ACC position on the ignition switch, care isneeded when turning off the deck. Follow Step 2 or Step 3 whenturning ...

Listening to a CD Press the [OPEN] button. 1 The front panel opens. Insert a CD into the disc slot, label side up. 2 ATTENTION •A CD cannot be ejected when the front panel is closed, even after pressing button [1]. •When a CD is already loaded, press the [DISC] button to switch to the CD mode. 39 Ba...

40 Basic operation [OPEN] button [DISC] button Listening to MG Memory Stick Press the [OPEN] button. 1 The front panel opens. Insert a MG Memory Stick into the Memory Stick slot. 2 Warning Do not press the [OPEN] button while the MG Memory Stick isbeing inserted. This could cause an injury and damag...

Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM orAM bands. 2 Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. Turn the [SEL] button to the left or right to tune to astatio...

42 Basic operation Warning Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right. 1 Turn to the right: Increases the volume.Turn to the left: Decreases the volume. ATTENTION Press the [E-COM] button for more than one second if E-COM isconnected and less than one second if E-COM...

43 Basic operation V a r i o u s a u d i o c o n t r o l m o d e s m a y b e f i n e - t u n e d u s i n g t h i sprocedure. Modes will switch in the order shown below each time thebutton is pressed. Switching audio control modes Press the [AUDIO CONTROL] button for less than onesecond to select the...

46 Basic operation ATTENTION To disable the loudness feature, repeat the above procedure todisplay the [LOUD OFF] indication. The loudness control may be turned on to emphasize low and highfrequencies at low volume levels.Loudness compensates for the apparent weakness of low and highfrequencies at l...

47 Basic operation This function allows adjustment of display contrast and changingillumination colors. The display adjustment mode is activated. Making changes with Display Adjustment Mode Press the [DISP] button for less than one second. 1 [SEL] button [DISP] button When the button is turned, the ...

48 Basic operation Adjust the display contrast to the best level in accordance withthe angle of viewing. Turn the [SEL] button to select CONTRAST. Press the [SEL] button. Enters contrast adjustment mode. Turn the [SEL] button to adjust contrast. When the button is turned, the contrast level changes ...

49 Basic operation A variety of settings can be changed. The function mode is activated. When the button is turned, the setting item changes in thefollowing order. Making changes with Function Mode Press the [FUNC] button for less than one second. 1 Turn the [SEL] button in either direction to displ...

50 Basic operation T h e r e c e i v e r i s s e t a t t h e f a c t o r y t o e m i t a b e e p t o n e i nresponse to button operation. The guide tone feature may bedisabled in the following procedure: Turn the [SEL] button to select GUIDE TONE. Press the [SEL] button. The Guide Tone Mode will be ...

51 Basic operation This receiver uses the 12-hour display notation. Turn the [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Turn the [SEL] button to display the item to be selectedfor adjustment. Hours, minutes or exact hour will be switched each ti...

52 Basic operation Others Enabling E-COM feature Press the [E-COM] button for more than one second. Pressing the button will switch the E-COM feature on or off. 1 Buttons to be used will flash and operation order will be shownwhen in display adjustment mode, function mode or soundadjustment mode. Op...

53 How to operate the CD player Listening to CDs Press the [DISC] button to switch to the CD player mode. 1 First press the [DISC] button to switch to the disc mode. It isassumed here that a CD has already been loaded into the unit. How to operate the CD player [DISC] button This starts CD play.Disc...

54 How to operate the CD player Advancing to the next track or returning tothe beginning of the track being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track.Turn to the left: Returns to the beginning of the track beingplayed. (Repeat turning for prev...

56 How to operate the CD player [OPEN] button Ejecting the disc Press the [OPEN] button for less than one second. 1 The front panel opens. Press the button [1]. 2 Disc is ejected. •Do not drive with the front panel open. The panel may cause unexpected personal injury during a panic stop, or the like...

57 How to operate the CD player Creating a title for a CD Press the [FUNC] button for less than one second whilein the Disc mode. 1 Press the [SEEK ] button to select the character type. 4 Pressing the button will switch types from [ABC] (alphabetc h a r a c t e r s ) t o [ 1 2 3 ] ( n u m e r i c c...

59 How to operate the CD player Changing a previously set title Press the [FUNC] button for less than one second whilein the Disc mode. 1 Press either [SEL] or [FAST ] button to move the cursor t o t h e p o s i t i o n i n t h e t i t l e f o r i n s e r t i n g o r c h a n g i n gcharacters. 4 [SE...

60 How to operate the CD player Deleting a previously created title Press the [FUNC] button for less than one second whilein the Disc mode. 1 Hold button [6] down for more than two seconds. 4 The title has now been deleted. If external CD changers are connected, a previously created title fora CD wi...

61 How to operate the CD player Displaying CD TEXT Press the [DISP] button for more than one second. 1 Pressing the [DISP] button while text is displayed scrolls thedisplay in the order DISC title ➔ TRACK title, and then the display stops with the TRACK title. O n l y t h e b u i l t - i n C D p l a...

62 How to operate the MP3 player How to operate the MP3 player About MP3 MP3 (MPEG Audio Layer III) is a standard format for audio compressiontechnology. By using MP3, a file can be compressed to one-tenth the sizeof the original.This deck has limitations on MP3 file standards and recorded media and...

63 How to operate the MP3 player M e d i a c a p a b l e o f p l a y i n g M P 3 i n c l u d e s C D - R a n d C D - R W d i s c s .Compared to CD-ROM media commonly used for music discs, CD-R discsare fragile in high temperature/high humidity environments and one sectionof the CD-R may become incap...

64 How to operate the MP3 player Only files with the MP3 file extension ".mp3" can be recognized as MP3 andplayed. Be sure to save MP3 files with the ".mp3" file extension. The "MP"l e t t e r s o f t h e f i l e e x t e n s i o n w i l l b e r e c o g n i z e d w h e t h e r...

65 How to operate the MP3 player Listening to MP3 file [DISC] button Press the [DISC] button to switch to the CD player mode. 1 This starts MP3 file play.Disc mode from CD player ➔ Memory Stick player in order each time the button is pressed.If an external CD changer is connected, each additional pr...

66 How to operate the MP3 player Advancing to the next track (file) or returning tothe beginning of the track (file) being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track (file).Turn to the left: Returns to the beginning of the track (file)being pla...

68 How to operate the MP3 player ATTENTION •During random playback, press button [5] to repeat the file being played. To cancel repeat play (go back to random play),press button [5] again. During playback of a particular file: The file being played isplayed repeatedly.While searching: The following ...

69 How to operate the Memory Stick player M u s i c d a t a r e c o r d e d o n " M G M e m o r y S t i c k " w i t h A T R A C 3 ( a n a u d i ocompression technology) can be played on this deck. Recording fromm u s i c C D t o t h e M G M e m o r y S t i c k i s a l s o p o s s i b l e . T...

72 How to operate the Memory Stick player Ejecting the Memory Stick Press the [OPEN] button. 1 The front panel opens. Eject the Memory Stick. 2 Lightly press the Memory Stick one time. Press the [OPEN] button. 3 The front panel closes. Warning ATTENTION Memory Stick will not eject by itself. Lightly...

73 How to operate the Memory Stick player Recording on Memory Stick Insert the MG Memory Stick to be recording the trackand music CD. 1 Press the [FUNC] button for more than one second. 2 Using ATRAC3 audio compression technology, this deck compressesthe music data played on the built-in CD player a...

74 How to operate the Memory Stick player Selecting tracks to be recorded Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select MS. 2 The track to be recorded can be selected. Press the [SEL] button. 3 The Memory Stick setting mode is activated. The function mode is act...

75 How to operate the Memory Stick player Setting sound quality Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select MS. 2 The recording sound quality (the recording bit rate) can be set. Therecording bit rate may be selected from 66k, 105k and 132k. Soundquality and d...

76 How to operate the Memory Stick player Deleting recorded file Press the [FUNC] button for less than one second, whenthe recording file being played back. 1 Turn the [SEL] button to select MS. 2 The recorded files being played can be deleted. Press the [SEL] button. 3 The Memory Stick setting mode...

77 How to operate the Memory Stick player Formatting MG Memory Stick (quick format) Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select MS. 2 MG memory stick can be formatted. Press the [SEL] button. 3 The Memory Stick setting mode is activated. The function mode is a...

78 How to operate the tuner Tuning to a station First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations inmemory. The receiver will accept up to 24 stations in memory: six inAM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting)...

80 How to operate the tuner Manually setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to thestation to be entered in memory. 2 This section covers the setting of stations in memory under thenumbered buttons. Selec...

81 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the display, and stations stored underpreset buttons [1] through [6] will be played for five secondseach. To stop the preset scan mode at a desired station, pressthe [SEL] butto...

82 How to operate the tuner Setting a station name Press the [FUNC] button for less than one second whilein the tuner mode. 1 Turn the [SEL] button to select STATION. 2 Press the [SEL] button. 3 Press the [SEEK ] button to select the character type. 4 Pressing the button will switch types from [ABC]...

84 How to operate the tuner Deleting a station name Press the [FUNC] button for less than one second whilein the tuner mode. 1 Hold the [6] button down for more than two seconds. 4 The station name has now been deleted. Turn the [SEL] button to select STATION. 2 Press the [SEL] button. 3 The station...

85 How to operate the tuner Button [1] Changing the reception sensitivity for automatic scanning Check that the deck is in standby mode. 1 Press and hold the button [1], then [FM AM] button, andhold both for more than three seconds. 2 The mode switches between AUTO mode and DX mode eachtime the butt...

86 How to operate the tuner Check that the deck is in standby mode. 1 Press and hold the button [3], then [FM AM] button, andhold both for more than three seconds. 2 The radio band switches between USA and OTHERS each timethe buttons are pressed.After changing the location, the power will turn on in...

87 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequenciestravel further. FM frequencies are much higher than AM’s(similar to a ray of light): they won’t bend but they will reflect.Often, they will be interrupted by tall buildings, moun...

88 How to operate the tuner A home receiver can catch weak FM stereo signals through theuse of a tall, directional or ultra-sensitive antenna. In a movingvehicle, the area for good reception is limited because ofvarying conditions encountered while driving, including thetypes and heights of broadcas...

89 How to operate the Sound Adjustment Mode About Sound Adjustment Mode How to operate the Sound Adjustment Mode Normal mode Advance mode × ○ (See page 101) Graphic equalizer × (Simplified) ○ (See page 106) Time alignment × ○ (See page 111) Crossover × ○ (See page 112) Multi-harmonizer ○ (See page 9...

90 How to operate the Sound Adjustment Mode A variety of materials are used inside a vehicle to manufacturethe seats and windows, and because these materials absorband reflect sound in different ways, the parametric equalizerl e t s y o u a d j u s t t h e p e a k s a n d d i p s o f t h e f r e q u...

92 How to operate the Sound Adjustment Mode For example, when adjusting the HPF, frequencies that arel o w e r t h a n t h e s p e c i f i e d f r e q u e n c y a r e p r o g r e s s i v e l ydampened, rather than simply not being played back at all.The "slope" adjustment function is the fun...

94 How to operate the Sound Adjustment Mode With vehicle audio systems, the installation position of thes p e a k e r s a n d t h e p o s i t i o n o f t h e l i s t e n e r m e a n t h a t t h edistances from the listener to the left and right speakers arealmost always different. These differences ...

95 How to operate the Sound Adjustment Mode When original sounds are converted to MP3, ATRAC3 format,frequency ranges that are not normally audible to the humanear are compressed. The multi-harmonizer can be used to playback these compressed sounds at as close to their originalform as possible so th...

96 How to operate the Sound Adjustment Mode Operations during Normal Mode Turn the [SEL] button to select a setting item. 3 When the button is turned, the setting item changes in thefollowing order. Press the [SOUND] button for less than one second. 1 The mode will change to sound adjustment mode. P...

97 How to operate the Sound Adjustment Mode [SEL] button [RTN] button [SOUND] button The DSP feature adds reverberations to simulate ambience indifferent types of surroundings (room size). Turn the [SEL] button to select DSP. Press the [SEL] button. The DSP mode is activated. Turn the [SEL] button t...

100 How to operate the Sound Adjustment Mode Operations during Advance Mode Turn the [SEL] button to select a setting item. 3 When the button is turned, the setting item changes in thefollowing order. Press the [SOUND] button for less than one second. 1 The mode will change to sound adjustment mode....

114 How to operate the Sound Adjustment Mode The sound quality data that has been downloaded from E-iSERV (web site) to a Memory Stick can be loaded into thedeck and saved there. Insert the memory stick to be used for reading the data. Press the [FUNC] button. The function mode is activated. Turn th...

116 How to use the Card remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it,wear out the battery or cause a malfunction. • Keep the remote cont...

117 How to use the Card remote control [PWR]button [MUTE]button [+] button[-] button Remote-controllight receptor Turning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. When the power is turned on, the state used when the power wasturned off suc...

118 How to use the Card remote control [MODE] button [BAND] button Switching playback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Each press will switch tuner modes from FM1 ➔ FM2 ➔ FM3 ➔ AM. Tuner Disc Memory Stick AUX How to play the tuner Selecting...

119 How to use the Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manually or automatically) Press the [ TUNE•SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations. 1 A short press of the but...

120 How to use the Card remote control [ DISC ] buttons [ TRACK • APS ] buttons [MUTE] button Press the [ TRACK•APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previoustracks.) 1 Skipping to the next or p...

121 How to use the Card remote control Replacing the battery On the back of the remote control, while pressing thelocking knob on the battery slot cover toward your right,pull out the battery carrier with your fingernail. 1 Use one CR2025 battery. Unlock Remove the old battery, then place the new on...

122 How to use an optional NOB remote control [MUTE] button Muting the volume Press the [MUTE] button for more than one second to cut thevolume or restore it instantly. ATTENTION Press the [MUTE] button for more than one second if E-COM isconnected and less than one second if E-COM is not connectedt...

125 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK PU SH-MOD E [E-COM] button [ILLUMI] button [ DISC ] buttons [ TRACK ] buttons Advancing to the next track or returning tothe beginning of the track being played Press the [ TRACK ] button. [ ] button: ...

130 How to operate the receiver with an optional CD changer connected ATTENTION •During random playback, press button [5] to repeat the track being played. To cancel repeat play (go back to random play),press button [5] again. During playback of a particular track: The track being played isplayed re...

131 How to operate the receiver with an optional CD changer connected Buttons 1 2 3 4 5 6 CD 1 2 3 4 5 6 7 8 9 10 11 12 To select a CD from nos. 7 to 12, press the desired buttonconsiderably longer. Press the [SEL] button for less than one second. 1 Press a button from [1] to [6]. 2 Specifying a CD ...

132 Others Connecting Portable Audio Players to the AUX Jack Turn on the portable audio player and start its playfunction. 1 Switch to AUX mode by pressing the [DISC] button formore than one second. 2 Activation of the AUX mode will light the "AUX" indicator andchannel audio player output to...

133 If you have a question: F i r s t c h e c k t h e i t e m s m e n t i o n e d b e l o w b e f o r e a t t e m p t i n g t otroubleshoot problems. Caution If you have a question: [RESET] button If a problem occurs, for instance when the unit does not respondto any button presses, or the display d...

134 If you have a question: Displayed information (for troubleshooting) The information listed in the chart below is displayed to show thestatus of the CD, Memory Stick player and CD changer. Refer to thechart for the appropriate action. INFO 2 NO DISC LOADED IN THE MAGAZINE There is no disc in the ...

138 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx. 1.4kg Usage temperature range -20°C to +65°C (-4°F to +149°F ) Storage temperature range -40°C to +85°C (...

139 Before installation No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear bracket 1 5 Bezel 1 6 Bushing 1 7 Self-tapping screw (6 x 16 mm) 2 8 Stud bolt 1 9 Flat head screw (5 x 8 mm) 4 10 Hex-head bolt (5 x 20 mm) 2 11 Hex nut (5 mm) 2 12 Interconnecting cable 1 13 Remote cont...

140 Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicledash board or console box. 1 Use a screwdriver or the like to bend the tabs in themounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using flatheadscrews....

141 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locksin place. 5 Fasten the rear of the main unit using either method [A]or [B]. 6 Install the bezel on the main unit. 7 TOP BEZEL 5 MOUNTING SLEEVE 2 STUD BOLT 8 BUSHING METAL OFV...

142 Mounting instruction Names of lead wires and destinations (refer to Page 144) No. Name Wire color Destination 1 ACC Red Connect where the power comes onw h e n t h e i g n i t i o n i s i n t h e A C Cposition. 2 B+ Yellow Connect where the power is constantlyavailable, regardless of the ignitio...

143 Mounting instruction System CD5444 CD5444 CD5444 CD5444

145 Mounting instruction TO POWER ANTENNA RELA Y (Supply) TO HEADLIGHT SWITCH (Illumination) TO TURN-ON LEAD OF EACH UNIT (Supply) TO ACC (Power Supply)1 TO BA TTER Y+12V (Per manent Supply) 2 TO GROUND Pink (+) Purple/Black ( - ) Black Purple (+) Gr een/Black ( - ) Blue/White Orange/White Blue Red ...

148 How to contact customer service S h o u l d t h e p r o d u c t r e q u i r e s e r v i c e , p l e a s e c o n t a c t y o u r n e a r e s tfollowing Eclipse dealer. < U.S.A/CANADA > DIVISION OF FUJITSU TEN CORP. OF AMERICA19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502Phone: (310) 327-215...

149 How to contact customer service < KOREA > HYUNDAI AUTONET Co., LTD.1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku,Seoul, Korea 135-080Phone: 02-508-6001Fax: 02-2-508-6067 Transpectra Co., Ltd.115-16 nonhyun dong kangnam ku Seoul, Korea.Phone: 02-540-4595Fax: 02-2-540-4666 < TAI...

150 M e m o • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

151 IMPORTANT RECORD YOUR “KEY CD” OR “MEMORY STICK (SECURITY CODE)” HERE… STORE YOUR “KEY CD” OR “MEMORY STICK (SECURITY CODE)” ALONG WITH YOUR OWNER’S MANUAL TAKE THIS OUT.

090001-1458A700 0405 (Y. O) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD5444 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU  TEN  LIMITED