Dual MXCP44 - Manuals - manualsarea.com

Page 2 - Preparation; INSTALLATION

2 Preparation MOUNTING SLEEVE REMOVAL KEYS TYPICAL MOUNTING METHOD MXCP44 INSTALLATION Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.• Avoid installing the unit where it would be subject to hig...

Page 3 - Wiring Diagram

3 Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The MXCP44 uses one 10 amp AGC fuse located in-line. MXCP44 INSTALLATION

Page 4 - Control Locations - Receiver; OPERATION

4 Control Locations - Receiver Release Power Volume Knob Band / Go Back USB Port Auxiliary Input Tune / Track Up Preset 6 / Folder Up Preset 5 / Folder Down 12345678 Preset 4 / Play / Pause Preset 3 / Intro Preset 2 / Random Preset 1 / Repeat Tune / Track Up Tune / Track Down Audio Mode 9 1011121314...

Page 5 - Control Locations - Remote

5 MXCP44 OPERATION Control Locations - Remote Power Tune / Track Down Volume Up Select Volume Down Tune / Track Up Audio Display Preset 3 / Intro 1234567 8 Mute Preset 6 / Folder Up Preset 4 / Play / Pause Preset 5 / Folder Down Preset 1 / Repeat Preset 2 / Random Mode Band / Go Back 9 1011121314 1...

Page 6 - General Operation

6 MXCP44 OPERATION General Operation Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Press or any other button to turn the unit on. Press again to turn the unit off. Press MODE to select between AM/FM, U...

Page 8 - nn; ll; nn; ll; ll; Tuner Operation

8 MXCP44 OPERATION Press TUNE nn or TUNE ll for more than 2 seconds to seek the next strong station. Press TUNE nn or TUNE ll momentarily to change one radio frequency at a time. Press and hold to advance quickly. Press BAND to select between FM1, FM2, FM3 and AM1, AM2 bands. Six presets can be s...

Page 9 - SD Card / USB Operation

9 MXCP44 OPERATION SD Card / USB Operation Play MP3/WMA/WAV files from many mass storage devices by connecting them to the MXCP44's USB port. To play MP3/WMA/WAV files from an SD card, insert an SD card into the MXCP44's SD card slot with the label facing left. It will click into place when proper...

Page 12 - Speaker Preparation/Installation

12 MXCP44 OPERATION Speaker Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.• Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or exi...

Page 13 - Radio Specifications

13 MXCP44 OPERATION Radio Specifications Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 25dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-18kHz Tuning range: 530kHz-1710kHz Usable sensitivity: <36dB Frequency response: 80Hz-2kHz Outside Diame...

Page 14 - WARRANTY; Troubleshooting; FCC Compliance

14 MXCP44 WARRANTY Troubleshooting Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace...

Page 15 - Limited One Year Warranty

15 MXCP44 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one ...