Page 2 - TYPICAL FRONT-LOAD DIN MOUNTING METHOD; INSTALLATION; Preparation
2 TYPICAL FRONT-LOAD DIN MOUNTING METHOD Please read entire manual before installation. Before You Start• Disconnect negative battery terminal. Consult a qualified technician for instructions.• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or...
Page 3 - FUSE; Wiring Diagram
3 FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA7715 uses one10 amp ATM fuse located beside the wiring connector. XDMA7715 INSTALLATION Wiring Diagram BLACK 8-pin Female Mini-DIN BTM60 Connection (sold sep...
Page 4 - OPERATION; Control Locations - Receiver
4 Talk/Redial Mode/Search Mute/End Call Preset 2/Repeat Preset 1/Folder Down Open Volume Eject Preset 6/Folder Up Return/Key 7 Tune/Track Down AS/PS/Enter/Key # Tune/Track Up 123456789 10 Display/Key 0 Tuner Scan/Key 8 EQ/Key 9 Key 0 Band/Play/Pause/Key * Infrared Sensor Power Preset 5/Menu Preset 4...
Page 5 - Control Locations - Remote
5 XDMA7715 OPERATION Control Locations - Remote Mute/End Call Scan/Key 8 Talk/Redial Return/Key 7 Preset 5/Menu Preset 4/Intro Preset 1/Folder Down Mode/Search Tune/Track Down Band/Play/Pause/Key * 12345678 9 10 11 1213141516171819 Power Volume Up AS/PS/Enter/Key # Audio/Setup Tune/Track Up Display...
Page 6 - nn; ll; General Operation
6 The front panel is semi-permanently attached during assembly. Please refer to the separate yellow instructions (before installation) to make the front panel removable. With the unit off, press EJECT to allow the front panel to slide down. Gently squeeze the release tab located on the bottom center...
Page 7 - General Operation - Setup Menu
7 XDMA7715 OPERATION General Operation - Setup Menu Menu Function Options Action Loudness Curve LOUD OFF Disables the loudness function. LOUD ON Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Tuner Frequenc...
Page 9 - AM/FM Tuner Operation
9 Seek Tuning Manual Tuning Scan Tuning Band Storing and Recalling Station Presets Automatically Store Stations Preset Scan Press TUNE nn or TUNE ll momentarily to seek the next strong station. Press TUNE nn or TUNE ll for more than 2 seconds, then release. "MANUAL" will momentarily app...
Page 10 - CD Player Operation
10 Insert CD Eject CD Track Select Fast Forward and Reverse Pause Scan Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous mode of operatio...
Page 12 - MP3/WMA Button Function Table
12 XDMA7715 OPERATION CD Player Operation - MP3/WMA Files Press SEARCH for more than 3 seconds, to select between the following modes:• Direct File Select• Alphanumeric File or Folder Search• File or Folder Navigate Press SEARCH for more than 3 seconds, then release. “MP3 T * " or “WMA T * ” wi...
Page 17 - Bluetooth; Overview; Connection Notes
Bluetooth ® Operation (Optional) Overview Connecting a Bluetooth device requires first connecting the Dual BTM60 module (sold separately). When connected to a Dual Bluetooth Ready head unit, the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution profile) and AVRCP (audio...
Page 19 - Bluetooth Streaming Audio Operation
Bluetooth ® Settings (Optional) Menu Function Options Action Bluetooth Mode BT ON Enables the BTM60 Bluetooth Interface Module (sold separately). The Bluetooth icon will flash every 10 seconds. BT OFF Disables Bluetooth support. Auto Connect ACNT ON Allows the BTM60 to automatically (re)connect to...
Page 20 - WARRANTY; Limited One Year Warranty
XDMA7715 WARRANTY 20 Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one...
Page 21 - Troubleshooting
Troubleshooting Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has powe...
Page 22 - Specifications; CEA-2006 Power Standard Specifications
XDMA7715 OPERATION 22 Specifications Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-...
Page 23 - FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modi...