Dixon 301, 302 - Manuals

across walks or objects that project above the surface. 9. When the mower is not in use, turn the engine off; never leave the engine running unattended. Your Dixon mower is equipped with a weight-sensitive switch that kills the engine when operator leaves the seat while blades are engaged. 10. Befor...

ing rope as soon as engine starts. To stop engine turn key to "OFF" position. 5. Set engine to desired speed by adjusting throttle control. (Suggest set at slow speed during initial operation.) 6. NOTE SAFETY FEATURE: Engine stops automatically if operator leaves seat while blades are engage...

ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING. 9. Parking Brake: Parking brake is hand operated and is located at right-hand side of mower. To disengage move lever forward. To engage brake pull lever to the rear. Always set parking brake before dismounting. Be sure that parking brake is diseng...

BODY REMOVAL FOR ZTR-301 / 302 1. Disconnect throttle cable from engine by loosening clamp on engine and disconnecting cable. 2. Disconnect two (2) switch loom plugs, one going to engine wires and one going to frame wire loom. Plugs are located back of transaxle mount. 3. Remove four (4) control lev...

SPARE PARTS See your dealer for ordering spare parts or warranty service. REMOVING AND REINSTALLING MOWER DECK 1. Remove engaging handle by removing bolt and nut under handle. 2. Disconnect mower deck wire loom from frame wire loom. 3. Loosen belt keeper located under engine by loosening two (2) rea...