Digi MIL-170TRM - Manuals

Digi MIL-170TRM – Manual in PDF format online.

Manuals:

Manual Digi MIL-170TRM

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Install Guide; A b o u t t h i s M a n u a l; • Link Sentry feature; I n s t a l l a t i o n; Slide the module into the slot through the guide rails.

Install Guide Model: MIL-170TRM 2 A b o u t t h i s M a n u a l This document covers the MIL-170TRM media converter module. The terms “MIL-170,” MIL-170TRM,” and “converter” are used throughout this document to describe the MIL-170TRM. I n t r o d u c t i o n The MIL-170TRM is one of a series of mod...

Page 3 - L i n k S e n t r y C o n fi g u r a t i o n

Install Guide Model: MIL-170TRM 3 M D I - X / M D I S w i t c h The MDI-X/MDI switch allows for quick configuration of the 10BASE-T port. Cables used when the switch is in the MDI-X position (the “left” position): • For a hub/repeater, use a swap cable (pins are connected 1 to 3, 2 to 6, 3 to 1, and...

Page 4 - The following table shows which Link Sentry feature is enabled:; I n d i c a t o r s; : Receiving packets from the 10BASE-T port; S p e c i fi c a t i o n s; Table 1: Link Sentry Features

Install Guide Model: MIL-170TRM 4 The following table shows which Link Sentry feature is enabled: Note: For two MIL-170s used back-to-back and UTP-to-UTP, all DIP switches must be enabled (in the “down” position) on the first MIL-170. On the second MIL-170, enable switches 1 and 4 (in the “down” pos...

Digi Manuals