Digi Hubport/4c+ - Manual

USB Plus Series Installation Guide (90000410 Rev. C) – Page 4 Driver Installation For Windows XP and 2003 Server Users Note: If your computer is connected to the internet, the latest Microsoft certified drivers will be automatically downloaded from the Microsoft driver update server. 1) You must be ...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 5 For Windows NT 4.0 Users Because Microsoft does not support USB in NT4.0, Inside Out Networks supplies a set of USB drivers that will be installed along with the necessary Edgeport drivers. NOTE: You must install the drivers using an acco...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 6 USB Plus Series Interface (for Hubport/4c+ and the managed Hubport/PCI+ and Hubport/PCI+ LP cards) The USB Plus Series products present themselves to a user application by way of a virtual serial port. This serial port is named as all sta...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 7 Edgeport Utility Program For All Windows Operating Systems The Edgeport configuration utility program ( edgeport.exe ) allows you to manage the serial ports of your device. Note that with Windows NT you must have administrative privileges...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 8 • Configure - Reassign the physical port on your device to any available Windows COM port number from 1 to 255 and give your device a user friendly Device Name. This capability is particularly helpful if you have more than one device. • P...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 10 But if you set the flag we will complete the read when we detect ~200 ms no activity. Here is a comment from the code: If the receiver is active then do not complete this read. The problem is that the Edgeport buffers the RX bytes and we...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 11 • Port Status – Provide the status of a selected (highlighted) serial port. The Poll Interval is the number of seconds between updates of this window. This is also the number of seconds between each entry in the log file. To create a log...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 12 Advanced Tab The Advanced tab allows you to do the following: • Uninstall – Uninstall the drivers. • Enable Event Logging – Place event messages in system event log. • COM Port Assignment – Configure how COM ports will be assigned. The d...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 13 Understanding Hubs Hubs, critical components in the USB architecture, are wiring concentrators that enable the attachment of multiple devices, thus converting a single attachment point into multiple attachment points. USB architecture al...

USB Plus Series Installation Guide (90000410 Rev. C) – Page 14 Regulatory & Other Information © 2006 Digi, Digi International, the Digi logo, the Digi Connectware logo, Inside Out Networks and its logo, Edgeport, and Hubport are either trademarks or registered trademarks of Digi International, I...