Digi MIL-170TRM - Manual

Digi MIL-170TRM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Install Guide; A b o u t t h i s M a n u a l; • Link Sentry feature; I n s t a l l a t i o n; Slide the module into the slot through the guide rails.
Page 3 – L i n k S e n t r y C o n fi g u r a t i o n
Page 4 – The following table shows which Link Sentry feature is enabled:; I n d i c a t o r s; : Receiving packets from the 10BASE-T port; S p e c i fi c a t i o n s; Table 1: Link Sentry Features
Page 5 – F i b e r S p e c i fi c a t i o n s : S T c o n n e c t o r; • 1300 nm single-mode fiber; O p e r a t i n g C o n d i t i o n s; Table 2: Recommended Operation Conditions; Parameters; Operating Temperature
Page 6 – L e g a l D e c l a r a t i o n; R e g u l a t o r y A p p r o v a l s; C a n a d i a n E M I N o t i c e; Address: 1299 Orleans Drive; Five-Year Limited Warranty

Loading the manual

Doc #: 90000096 Rev. A

M I L - 1 7 0 T R M

1 0 BA S E - F L t o 1 0 BA S E - T

M e d i a C o nv e r t e r fo r D i g i ' s

M e d i a C o nv e rs i o n S y s t e m

I n s t a l l a t i o n G u i d e

This guide includes the following:

“Introduction” on page 2

“Features” on page 2

“Installation” on page 2

“MDI-X/MDI Switch” on page 3

“Link Sentry Configuration” on page 3

“Indicators” on page 4

“Specifications” on page 4

“Operating Conditions” on page 5

“Legal Declaration” on page 6

ACT

MIL-

170TRM

LINK

ACT

MDI-X MDI

10BASE-T

10BASE-FL

Thumbscrews

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Install Guide; A b o u t t h i s M a n u a l; • Link Sentry feature; I n s t a l l a t i o n; Slide the module into the slot through the guide rails.

Install Guide Model: MIL-170TRM 2 A b o u t t h i s M a n u a l This document covers the MIL-170TRM media converter module. The terms “MIL-170,” MIL-170TRM,” and “converter” are used throughout this document to describe the MIL-170TRM. I n t r o d u c t i o n The MIL-170TRM is one of a series of mod...

Page 3 - L i n k S e n t r y C o n fi g u r a t i o n

Install Guide Model: MIL-170TRM 3 M D I - X / M D I S w i t c h The MDI-X/MDI switch allows for quick configuration of the 10BASE-T port. Cables used when the switch is in the MDI-X position (the “left” position): • For a hub/repeater, use a swap cable (pins are connected 1 to 3, 2 to 6, 3 to 1, and...

Page 4 - The following table shows which Link Sentry feature is enabled:; I n d i c a t o r s; : Receiving packets from the 10BASE-T port; S p e c i fi c a t i o n s; Table 1: Link Sentry Features

Install Guide Model: MIL-170TRM 4 The following table shows which Link Sentry feature is enabled: Note: For two MIL-170s used back-to-back and UTP-to-UTP, all DIP switches must be enabled (in the “down” position) on the first MIL-170. On the second MIL-170, enable switches 1 and 4 (in the “down” pos...