Digi 34 - Manual
Digi 34 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents; INTRODUCTION; Outline; Other Compatible Models:
- Page 3 – Corrections; Version
- Page 4 – CONFIGURATION
- Page 8 – Configure the Default Routes; Configuration - Routing > Default Route 0
- Page 9 – Configure the Firewall; Configuration – Security > Firewall; pass out break end on PPP 1 –
- Page 10 – oos; Save configuration; Administration - Save configuration
- Page 11 – TESTING; Simulate a failure; Diagnostics - Event Log; CONFIGURATION FILES; Digi Transport Configuration Files
- Page 12 – Digi Transport Firmware Versions
1
Application Note 34
Configuring ADSL to backup to PSTN/ISDN with
automatic testing and recovery back to ADSL.
UK Support
29 December 2009
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Contents 1 Introduction ............................................................................................................................................... 2 1.1 Outline .......................................................................................................................
3 Configuration: This Application Note assumes that the Digi Transport router is already configured with a working ADSL connection through PPP 1. 1.3 Corrections Requests for corrections or amendments to this application note are welcome and should be addressed to:
4 2 CONFIGURATION 2.1 Configure PPP 1 (ADSL) This PPP interface should already be configured for use with the ISP. You should confirm that you have a working ADSL connection before proceeding with this configuration. The PPP 1 interface needs to be configured to be “always on”. The inactivity timer ...
