Page 2 - L I M I T E D W A R R A N T Y; ONE YEAR FROM DATE OF PURCHASE; THIS WARRANTY DOES NOT COVER:
2 — ENG L I M I T E D W A R R A N T Y ONE YEAR FROM DATE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company/ExCell Manufacturing is warranted to be free ofdefects in workmanship and material which occur during the first year from the date of purchase by the originalpurchaser (in...
Page 3 - RISK OF BURSTING; HAZARD; IMPORTANT SAFETY INSTRUCTIONS
3 — ENG RISK OF BURSTING RISK OF EXPLOSION OR FIRE RISK OF ELECTRICAL SHOCK AIR TANK THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE TANK, AND RESULT IN A VIOLENT TANK EXPLOSION: 1. FAILURE TO PROPERLY DRAIN CONDENSED WATER FROM THE TANK, CAUSING RUST AND THINNING OF THESTEEL TANK. 2. MODI...
Page 5 - GLOSSARY
5 — ENG DAMAGE: Each air compressor outfit is carefully tested and checked before shipment. With improper handling, damagemay result in transit and cause problems in compressor opera-tion. Immediately upon arrival, check equipment for both concealed and visible damages to avoid expenses being incurr...
Page 6 - Items Needed For Assembly; DESCRIPTION OF OPERATION
6 — ENG Drain Valve: The drain valve is located at the base of the air tank and is used to drain condensation at the end of each use. Motor Thermal Overload Protector: The electric motor has an automatic thermal overload protector. If the motor over-heats for any reason, the thermal overload protect...
Page 7 - Location of the Air Compressor; INSTALLATION AND BREAK-IN PROCEDURES; Lubrication and Oil; Extension Cords; Voltage and Circuit Protection
7 — ENG Location of the Air Compressor Locate the air compressor in a clean, dry and well ventilatedarea. The air filter must be kept clear of obstructions whichcould reduce air flow to the air compressor. The air compres-sor should be located at least 12" away from the wall or otherobstructions...
Page 8 - Additional Regulators and Controls; OPERATING PROCEDURES; When you are finished:; GROUNDING INSTRUCTIONS
8 — ENG Additional Regulators and Controls Since the air tank pressure is usually greater than that which isneeded, a separate regulator is usually employed to control the airpressure ahead of any individual air driven device. Break-in Procedures Serious damage may result if the following break-in i...
Page 9 - Air Filter - Inspection and Replacement; ROUTINE MAINTENANCE SCHEDULE; Motor; MAINTENANCE; SERVICE INSTRUCTIONS
9 — ENG WATER WILL CONDENSE IN THE AIR TANK. IF NOTDRAINED, WATER WILL CORRODE AND WEAKENTHE AIR TANK CAUSING A RISK OF AIR TANK RUP-TURE. 11. After the water has been drained, close the drain cock or drain valve. The air compressor can now be stored. NOTE If drain cock valve is plugged, release all...
Page 12 - GENERAL MANUAL FOR; PERMANENTLY LUBRICATED; SERVICE NOTES
DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 GENERAL MANUAL FOR PERMANENTLY LUBRICATED PORTABLE/STATIONARY AIR COMPRESSOR SERVICE NOTES