Devilbiss D21684 - Manuals

Devilbiss D21684 – Manual in PDF format online.

Manuals:

Manual

Manual Devilbiss D21684

Summary

Page 2 - INDEX; Back Cover; SAFETY GUIDELINES - DEFINITIONS

2 — ENG INDEX FREQUENTLY ASKED QUESTIONS ...................................................................... 3 SAFETY GUIDELINES ........................................................................................... 4 WARNING CHART ...............................................................

Page 3 - Frequently Asked Questions:; Do not

3 — ENG Frequently Asked Questions: What kind of oil do I use? • Engine: Refer to Engine manual for oil recommendations. • Pump: See page 16 and 17. My Pressure Washer won’t start..(See Engine manual for starting instructions) • Has gasoline been added to the engine? • Is engine on/off switch in “on...

Page 4 - HAZARD; HOW TO PREVENT IT; DANGER; IMPORTANT SAFETY INSTRUCTIONS; WARNING

4 — ENG IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTYDAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING. HAZARD • Unsafe operation of your pressure washer could lead to serious injury or death to youor others. • If proper ...

Page 5 - SAFETY

5 — ENG SAFETY WARNING HAZARD • Spray directed at electrical outlets or switches, or objects connected to anelectrical circuit, could result in a fatalelectrical shock. • Your washer operates at fluid pressures and velocities high enough to penetratehuman and animal flesh, which couldresult in amput...

Page 6 - GLOSSARY; will; OWNER'S RESPONSIBILITIES

6 — ENG PSI: Pounds per square inch is a unit of measure for pressure. GPM: Gallons Per Minute (Flow Rate) Cleaning Units: GPM x PSI Vertical: A vertical pressure washer has the pump located underneath the engine. Horizontal: A horizontal pressure washer has the pump located behind the engine. Multi...

Page 7 - ASSEMBL; BOX CONTENTS; ASSEMBLY

7 — ENG ASSEMBL Y BOX CONTENTS Handle Chemical Hose Engine Frame and Wheel Assembly High Pressure Hose Gun 1. Connect handle to frame. Nozzle Cleaning Kit Attaching Handle or or or Wand/Lance Assemblies ASSEMBLY Quick Connect Nozzle - only on units equipped with thequick connect lance Multi-Reg Wand...

Page 9 - Illustration C; OPERATING PROCEDURES; Figure 2

9 — ENG 5. Some pumps are shipped from the factory with a red shipping plug. Refer to page 16 and 17 to identify your pump.The Annovi Reverberi pump can also beidentified by its name printed on top of the pump. The shipping plug prevents any oil fromleaking out of the pump in shipping. Attached to t...

Page 10 - PRE START CHECKLIST; All safety instructions read and understood?

10 — ENG 5. Connect water source to pump inlet — Figure 4. NOTE: Water source must provide a minimumof 5 gallons per minute at 20 p.s.i. 6. Turn water source on — Figure 5. NOTE: Make sure water supply is turned on. Never turn water supply off while pressurewasher engine is running or damage topump ...

Page 11 - High Pressure Operation:; Dual Lance —

11 — ENG OPERATING PROCEDURES (cont'd) High Pressure Operation: DO NOT let hoses come in contact withvery hot engine muffler during or immedi-ately after use of your pressure washer. RISK OF INJECTION OR INJURY TOPERSON. DO NOT DIRECT DISCHARGESTREAM TOWARD PERSONS. WHEN USING THE HIGH PRESSURESETTI...

Page 13 - Low Pressure Operation:; Larger Hole

13 — ENG Low Pressure Operation: (to siphon chemicals/soaps) NOTE: Use only soaps and chemicals designed forpressure washer use. Do not use bleach. 1. Connect chemical hose to the pump by one of thefollowing methods: a. Press the chemical hose onto the barb fittinglocated near the high pressure hose...

Page 14 - Pressure adjustment; CAT

14 — ENG Pressure adjustment : The pressure setting is preset at the factory to achieveoptimum pressure and cleaning. If you need to lowerthe pressure, it can be accomplished by two methods. The first method is to back away from the surface tobe cleaned. The further away you are, the less thepressur...

Page 15 - Chemical Adjustment

15 — ENG Chemical Flow Adjustment Some pumps are equipped with an adjustable chemi-cal injector as shown here. Turn the chemical adjust-ment knob counterclockwise to increase the amountof chemical used and clockwise to decrease theamount of chemical used. If the knob is turnedclockwise until it stop...

Page 16 - Karcher; MAINTENANCE; psi) is shipped from the factory

16 — ENG Karcher Faip (Vertical) Faip (Horizontal) MAINTENANCE WHEN DOING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES, WATER PRESSURE, MOVING PARTS, ORFIRE RESULTING IN DEATH. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE,LET ENGINE COOL AND RELEASE ALL WATER PRESSURE. ...

Page 19 - Water Inlet Screen Cleaning:

19 — ENG Water Inlet Screen Cleaning: All pumps are equipped with some type of water filterscreen. This screen should be checked periodicallyand cleaned if necessary. Refer to the illustrations tothe right to determine which filter screen your pumphas. The filter in Figure 20 and 22 can be removed a...

Page 20 - PREPARATION FOR STORAGE; ENGINE; STORAGE & WINTER STORAGE

20 — ENG PREPARATION FOR STORAGE It is recommended that you follow these steps toprotect the internal seals of the pressure washer when storing the unit for an extended period and WHENFREEZING TEMPERATURES ARE EXPECTED. ENGINE 1. Remove gasoline from engine or add fuel stabi-lizer, such as "Sta-...

Page 21 - TROUBLESHOOTING GUIDE; PROBLEM; TROUBLESHOOTING; Will not draw chemicals

21 — ENG TROUBLESHOOTING GUIDE PROBLEM CAUSE CORRECTION Engine will not start(see Engine Manual forfurther engine trouble-shooting) 1. Wand not in low pressure. 2. Chemical filter clogged. 3. Chemical screen not in chemical. 4. Chemical adjustment knobclosed. 5. Chemical too thick 6. Pressure hose i...

Page 22 - Water leaking at pump

22 — ENG TROUBLESHOOTING GUIDE PROBLEM CAUSE CORRECTION No or low pressure (afterperiod of normal use.) Water leaking at gun/wandconnection Water leaking at pump Oil leaking at pump Engine will not idle down(if equipped with Idle downassembly) Water leaking from stem onidle down assembly (ifequipped...

Page 23 - LIMITED WARRANTY; THIS WARRANTY DOES NOT COVER:

23 — ENG LIMITED WARRANTY All merchandise manufactured by DeVilbiss Air Power Company Manufacturing is warranted to be free of defects inworkmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user).Products covered under this warranty ...

Page 24 - GENERAL MANUAL FOR; T O FIND A LOCAL AUT HORIZED SERVICE CENT ER NEAR YOU; NOZZLE; ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT; Pressure Washer Quick Facts

DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 GENERAL MANUAL FOR DeVilbiss/Ex-Cell Pressure Washers CALL 1-800-888-2468 EXT . 2 T O FIND A LOCAL AUT HORIZED SERVICE CENT ER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES. GAS Us e fres h high quality gas .Add s tabiliz ...