Delta DTT2450 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; CONSUMER SAFETY INFORMATION

2- ENG A04032 IMPORTANT SAFETY INSTRUCTIONS Do not operate this unit until you have read and understand this Operators Manual and the Engine Owners Manual for Safety, Operation, and Maintenance Instructions. RISK OF EXPLOSION OR FIRE HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT • Spilled gasoline and it...

Page 3 - RISK TO BREATHING

3- ENG A04032 • Materials placed against or near the pres- sure washer can interfere with its properventilation features causing overheatingand possible ignition of the materials. • Never operate pressure washer in an area containing dry brush or weeds. • Muffler exhaust heat can damage painted surf...

Page 6 - To Assemble Accessories Panel; Refer to Engine Owners

CARTON CONTENTS 6- ENG A04032 Bagged Parts Engine Frame and Wheel Assembly Chemical Hose Spray Gun Multi-Adjustable Spray Wand Engine Manual Accessories Panel Accessories Panel English/ Spanish/French Operation Manual High Pressure Hose Engine Oil Handle Allen Wrench andCleaning Tool ASSEMBLY INSTRU...

Page 7 - OPERATING INSTRUCTIONS; Throttle Control Lever:

7- ENG A04032 OPERATING INSTRUCTIONS BASIC ELEMENTS OF APRESSURE WASHER High Pressure Pump (located insidethe shroud) : Increases the pressure of the water supply. Engine: Drives the high pressure pump. High Pressure Hose: Carries the pressurized water from the pump tothe gun and spray wand. Spray G...

Page 8 - PRESSURE ADJUSTMENTS; Back away from the surface to; The further away you; READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

8- ENG A04032 PRESSURE WASHERTERMINOLOGY (cont'd) Bypass Mode: Allows water to re-circulate within pump when the guntrigger is not pulled. Allowing the unit torun for more than two minutes without the gun triggerpulled could cause overheating anddamage to the pump.Chemical Injection System: Mixes cl...

Page 9 - HOW TO USE SPRAY WAND; o pencil stream; Do

HOW TO USE SPRAY WAND Your pressure washer is equipped witha multi-adjustable spray wand withboth high and low pressure settings.The high pressure setting is forcleaning and rinsing, the low pressuresetting is for applying chemicals orcleaning solutions to surfaces. When using the highpressure setti...

Page 11 - MAINTENANCE

11- ENG A04032 6. Clean the nozzle using the nozzle cleaner provided or a straightenedpaper clip. Insert into the nozzleend and work back and forth untilobstruction is removed. 7. Direct water supply into nozzleend to backflush loosened particles for 30 seconds. 8. Reconnect spark plug wire 9. Reass...

Page 12 - STORAGE; ENGINE; Disconnect spark plug wire.; Windshield washer fluid may also be; PRESSURE WASHER

12- ENG A04032 STORAGE ENGINE Consult the Engine Owners Manual forthe manufacturer's recommendations forstorage. PUMP The manufacturer recommends usinga pump protector/winterizer whenstoring the unit for more than 30 daysand/or when freezing temperatures areexpected. If a pumpprotector/winterizer is...

Page 13 - TROUBLE SHOOTING GUIDE; PROBLEM

13- ENG A04032 TROUBLE SHOOTING GUIDE PROBLEM Engine will notstart (see EngineManual forfurther engine troubleshooting) No or lowpressure (initial use) CAUSE CORRECTION No fuel. Add Fuel. Pressure builds up after two pulls onthe recoil starter or after initial use. Squeeze gun trigger to relievepres...

Page 14 - Pump Pulsates

14- ENG A04032 Water leakingat pump Water leaking atgun/spray wandconnection No or lowpressure (after period ofnormal use) PROBLEM CAUSE CORRECTION Worn seal or packing Have replaced by AWSC. Worn or obstructed valves. Have replaced by AWSC. Worn unloader piston. Have replaced by AWSC. Check and rep...

Page 15 - NOTES

Page 16 - WARRANTY

16- ENG A04032 WARRANTY DELTA MACHINERY warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, airtools, service parts, pressure washers, and generators, which h...