Page 4 - Numbering for DIN Rail Power Supply; XX
Switch Mode Power Supply DRP024V060W1BA 4/13 Rev: 00, 1/10/2011 Numbering for DIN Rail Power Supply For example: DRP024V060W1BA XX X XXXX XXXX X XX XX………………….Product Type DR DinRail XX X XXXX XXXX X XX X………………….Model P Power Supply XX X XXXX XXXX X XX XXXX………………….Voltage 024V 24 Voltage XX X XXXX XX...
Page 6 - Derating Curve (Both of Horizontal and Vertical)
Switch Mode Power Supply DRP024V060W1BA 6/13 Rev: 00, 1/10/2011 Engineering Data Derating Curve (Both of Horizontal and Vertical) o Model: DRP024V060W1BA Note: 1. Do not use the device in areas outside of the shaded portion shown in the above graph. Internal parts may gradually deteriorate and bec...
Page 7 - Mechanical drawing
Switch Mode Power Supply DRP024V060W1BA 7/13 Rev: 00, 1/10/2011 Mechanical drawing Device description (Fig. 1) (1) Input terminal block connector (2) Output terminal block connector (3) DC voltage adjustment potentiometer (4) DC OK control LED (green) (5) Universal mounting rail system
Page 8 - Overload Protection; Short Circuit Protection
Switch Mode Power Supply DRP024V060W1BA 8/13 Rev: 00, 1/10/2011 Overload Protection The Power Supply is provided with an overload protection (OLP) function which protects the power supply from possible damage caused by excess current. The Power Supply also has an over temperature protection (OTP) ...
Page 9 - Overvoltage protection
Switch Mode Power Supply DRP024V060W1BA 9/13 Rev: 00, 1/10/2011 Overvoltage protection The Power Supply has an overvoltage protection (OVP) and is activated when the power supply feedback circuit fails. The output voltage will not be > 35V under any Line/Load and operating ambient temperature. ...
Page 10 - Output Voltage Adjust
Switch Mode Power Supply DRP024V060W1BA 10/13 Rev: 00, 1/10/2011 Hold-up Time, Hold time is the time when the AC input collapses and o/p voltage retains regulation for a certain period of time is called as hold up time. See in the picture below a typical hold up time characteristic of a power supply...
Page 11 - Surge Load
Switch Mode Power Supply DRP024V060W1BA 11/13 Rev: 00, 1/10/2011 Surge Load See below typical surge load capability of the power supply, the PSU is capable of delivering 3 secs of Surge load about 150% of I O max the o/p voltage can be out of regulation limits of + 5%. Dynamic Load The Power Sup...
Page 12 - Redundancy & Parallel Operation with ORing Diode
Switch Mode Power Supply DRP024V060W1BA 12/13 Rev: 00, 1/10/2011 Redundancy & Parallel Operation with ORing Diode See picture below for a typical Redundant/Parallel operation using CliQ II Series Power Supplies. Power Supply Unit 1 (PSU1) and Power Supply Unit 2 (PSU2) are connected through a ...