Delta 78-904 - Manuals

Fig. 4 If you purchased the accessory leg kit (model 78-952) for use with the right extension table, Figure 4 illustrates the legs and loose items supplied with this accessory. 1 - Legs (2) 2 - 5/8 long wood screws #8 (8) 3 - 1/4-20 x 1-1/2 long flat head Phillips screws (4) 4 - 1/4 flat washers (4)...

Fig. 24 Fig. 25 Fig. 26 F E N C E O P E R ATION I M P O R TA N T: Before operating fence, make sure the fence is adjusted parallel to the miter gage slot, as explained later on in this manual . 1. To move the fence along the guide rail, simply lift up clamp lever (A) as shown in Fig. 24, slide fence...

LUBRICATION 1. Apply paste wax to fence and guide tube sliding sur- faces weekly. Also, saw table and extension table surface should be waxed often. 2. Apply grease to cam lock (A) Fig. 31, and cam foot (B) occasionally to prevent wear. Fig. 31 Delta will repair or replace, at its expense and at its...