Page 2 - GENERAL SAFETY RULES
2 GENERAL SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards involved with the operation of the product. Using the machine with respect and caution willconsiderably lessen the possibility of personal inj...
Page 3 - NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT; SAVE THESE INSTRUCTIONS.
3 IMPORTANT SAFETY RULES FOR DUST COLLECTORS WARNING: Basic precautions should always be followed when using your dustcollector. To reduce the risk of injury, electricalshock or fire, comply with the safety rules listedbelow: 1. DO NOT leave the dust collector plugged into the electrical outlet. Unp...
Page 4 - UNPACKING AND CLEANING
4 UNPACKING AND CLEANING Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasolineor lacquer thinner for this purpose). Af...
Page 6 - ASSEMBLY
6 ASSEMBLY ASSEMBLING CASTERS TOBASE Turn base over. Align four holes in caster (A) Fig. 5, withfour holes at one corner of base (B) and assemble casterto base. Place a 5/16" lockwasher (D), then a 5/16" flatwasher (E) on a 5/16-18x5/8" hex head screw (C), insertthe hex head screw throug...
Page 14 - MAINTENANCE; MOTOR MAINTENANCE
14 MAINTENANCE NOTE: Before any maintenance or service is performed, be sure that unit is disconnected from power source to prevent accidental starting. MOTOR MAINTENANCE Removing dust and dirt: Blow off motor with low pressure air to remove dust or dirt. Air pressure above 50 P.S.I. shouldnot be us...
Page 15 - ACCESSORIES; PARTS, SERVICE OR WARRANTY ASSISTANCE; Two Year Limited Warranty
15 ACCESSORIES A complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers, andDelta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier. WARNING: Since accessories...
Page 16 - DELTA SERVICE CENTERS; CANADIAN PORTER-CABLE
The following are trademarks of PORTER-CABLE·DELTA (Las siguientes son marcas registradas de PORTER-CABLE S.A.): BAMMER ® , INNOVATION THAT WORKS ® , JETSTREAM ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , SAW BOSS ® , SPEE...